kernel/linux.git/drivers/md/dm-raid.c, branch v5.15.7

dm: update target status functions to support IMA measurement

2021-08-10T17:34:23+00:00

For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi Signed-off-by: Mike Snitzer

dm raid: remove unnecessary discard limits for raid0 and raid10

2021-04-30T18:38:37+00:00

Commit 29efc390b946 ("md/md0: optimize raid0 discard handling") and commit d30588b2731f ("md/raid10: improve raid10 discard request") remove MD raid0's and raid10's inability to properly handle large discards. So eliminate associated constraints from dm-raid's support. Depends-on: 29efc390b946 ("md/md0: optimize raid0 discard handling") Depends-on: d30588b2731f ("md/raid10: improve raid10 discard request") Reported-by: Matthew Ruffell Signed-off-by: Mike Snitzer

dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences

2021-04-21T22:39:03+00:00

If fast table reloads occur during an ongoing reshape of raid4/5/6 devices the target may race reading a superblock vs the the MD resync thread; causing an inconclusive reshape state to be read in its constructor. lvm2 test lvconvert-raid-reshape-stripes-load-reload.sh can cause BUG_ON() to trigger in md_run(), e.g.: "kernel BUG at drivers/md/raid5.c:7567!". Scenario triggering the bug: 1. the MD sync thread calls end_reshape() from raid5_sync_request() when done reshaping. However end_reshape() _only_ updates the reshape position to MaxSector keeping the changed layout configuration though (i.e. any delta disks, chunk sector or RAID algorithm changes). That inconclusive configuration is stored in the superblock. 2. dm-raid constructs a mapping, loading named inconsistent superblock as of step 1 before step 3 is able to finish resetting the reshape state completely, and calls md_run() which leads to mentioned bug in raid5.c. 3. the MD RAID personality's finish_reshape() is called; which resets the reshape information on chunk sectors, delta disks, etc. This explains why the bug is rarely seen on multi-core machines, as MD's finish_reshape() superblock update races with the dm-raid constructor's superblock load in step 2. Fix identifies inconclusive superblock content in the dm-raid constructor and resets it before calling md_run(), factoring out identifying checks into rs_is_layout_change() to share in existing rs_reshape_requested() and new rs_reset_inclonclusive_reshape(). Also enhance a comment and remove an empty line. Cc: stable@vger.kernel.org Signed-off-by: Heinz Mauelshagen Signed-off-by: Mike Snitzer

dm raid: fix fall-through warning in rs_check_takeover() for Clang

2021-04-20T22:10:04+00:00

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mike Snitzer

dm raid: fix discard limits for raid1

2021-01-04T20:02:30+00:00

Block core warned that discard_granularity was 0 for dm-raid with personality of raid1. Reason is that raid_io_hints() was incorrectly special-casing raid1 rather than raid0. Fix raid_io_hints() by removing discard limits settings for raid1. Check for raid0 instead. Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac Reported-by: Mikulas Patocka Reported-by: Stephan Bärwolf Signed-off-by: Mike Snitzer

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

2020-12-16T20:57:51+00:00

Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...

Revert "dm raid: fix discard limits for raid1 and raid10"

2020-12-14T17:12:08+00:00

This reverts commit e0910c8e4f87bb9f767e61a778b0d9271c4dc512. Reverting 6ffeb1c3f822 ("md: change mddev 'chunk_sectors' from int to unsigned") exposes dm-raid.c compiler warnings detailed that commit's header. Clearly this more conservative fix, of simply reverting e0910c8e4f8, would've been more prudent given how late we were in the v5.10 release. Lessons have been learned. Signed-off-by: Mike Snitzer

Revert "dm raid: remove unnecessary discard limits for raid10"

2020-12-10T04:43:48+00:00

This reverts commit f0e90b6c663a7e3b4736cb318c6c7c589f152c28. Matthew Ruffell reported data corruption in raid10 due to the changes in discard handling [1]. Revert these changes before we find a proper fix. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/ Cc: Matthew Ruffell Cc: Xiao Ni Cc: Mike Snitzer Acked-by: Mike Snitzer Signed-off-by: Song Liu

dm-raid: use set_capacity_and_notify

2020-11-16T15:34:15+00:00

Use set_capacity_and_notify to set the size of both the disk and block device. This also gets the uevent notifications for the resize for free. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe

dm raid: remove unnecessary discard limits for raid10

2020-09-29T20:33:10+00:00

Commit bcc90d280465e ("md/raid10: improve raid10 discard request") removes raid10's inability to properly handle large discards. So eliminate associated constraint from dm-raid's raid10 support. Signed-off-by: Mike Snitzer