kernel/linux.git/drivers/md/dm-delay.c, branch v5.15.7

dm: update target status functions to support IMA measurement

2021-08-10T17:34:23+00:00

For device mapper targets to take advantage of IMA's measurement capabilities, the status functions for the individual targets need to be updated to handle the status_type_t case for value STATUSTYPE_IMA. Update status functions for the following target types, to log their respective attributes to be measured using IMA. 01. cache 02. crypt 03. integrity 04. linear 05. mirror 06. multipath 07. raid 08. snapshot 09. striped 10. verity For rest of the targets, handle the STATUSTYPE_IMA case by setting the measurement buffer to NULL. For IMA to measure the data on a given system, the IMA policy on the system needs to be updated to have the following line, and the system needs to be restarted for the measurements to take effect. /etc/ima/ima-policy measure func=CRITICAL_DATA label=device-mapper template=ima-buf The measurements will be reflected in the IMA logs, which are located at: /sys/kernel/security/integrity/ima/ascii_runtime_measurements /sys/kernel/security/integrity/ima/binary_runtime_measurements These IMA logs can later be consumed by various attestation clients running on the system, and send them to external services for attesting the system. The DM target data measured by IMA subsystem can alternatively be queried from userspace by setting DM_IMA_MEASUREMENT_FLAG with DM_TABLE_STATUS_CMD. Signed-off-by: Tushar Sugandhi Signed-off-by: Mike Snitzer

block: rename generic_make_request to submit_bio_noacct

2020-07-01T13:27:24+00:00

generic_make_request has always been very confusingly misnamed, so rename it to submit_bio_noacct to make it clear that it is submit_bio minus accounting and a few checks. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

dm delay: fix a crash when invalid device is specified

2019-04-26T15:29:32+00:00

When the target line contains an invalid device, delay_ctr() will call delay_dtr() with NULL workqueue. Attempting to destroy the NULL workqueue causes a crash. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer

dm: Check for device sector overflow if CONFIG_LBDAF is not set

2018-12-18T14:02:26+00:00

Reference to a device in device-mapper table contains offset in sectors. If the sector_t is 32bit integer (CONFIG_LBDAF is not set), then several device-mapper targets can overflow this offset and validity check is then performed on a wrong offset and a wrong table is activated. See for example (on 32bit without CONFIG_LBDAF) this overflow: # dmsetup create test --table "0 2048 linear /dev/sdg 4294967297" # dmsetup table test 0 2048 linear 8:96 1 This patch adds explicit check for overflow if the offset is sector_t type. Signed-off-by: Milan Broz Reviewed-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm delay: add flush as a third class of IO

2018-07-27T19:24:19+00:00

Add a new class for dm-delay that delays flush requests. Previously, flushes were delayed as writes, but it caused problems if the user needed to create a device with one or a few slow sectors for the purpose of testing - all flushes would be forwarded to this device and delayed, and that skews the test results. Fix this by allowing to select 0 delay for flushes. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm delay: refactor repetitive code

2018-07-27T19:24:19+00:00

dm-delay has a lot of code that is repeated for delaying read and write bios. Repetitive code is generally bad; refactor out the repetitive code in preperation for adding another delay class for flush bios. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm: backfill missing calls to mutex_destroy()

2018-01-17T14:16:15+00:00

Signed-off-by: Mike Snitzer

md: Convert timers to use timer_setup()

2017-11-15T03:11:57+00:00

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kent Overstreet Cc: Shaohua Li Cc: Alasdair Kergon Cc: Mike Snitzer Cc: dm-devel@redhat.com Cc: linux-bcache@vger.kernel.org Cc: linux-raid@vger.kernel.org Signed-off-by: Kees Cook Reviewed-by: Michael Lyle Reviewed-by: Mike Snitzer Signed-off-by: Jens Axboe

block: replace bi_bdev with a gendisk pointer and partitions index

2017-08-23T18:49:55+00:00

This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

dm: mark targets that pass integrity data

2017-04-24T16:04:32+00:00

A dm-crypt on dm-integrity device incorrectly advertises an integrity profile on the DM crypt device. It can be seen in the files "/sys/block/dm-*/integrity/*" that both dm-integrity and dm-crypt target advertise the integrity profile. That is incorrect, only the dm-integrity target should advertise the integrity profile. A general problem in DM is that if we have a DM device that depends on another device with an integrity profile, the upper device will always advertise the integrity profile, even when the target driver doesn't support handling integrity data. Most targets don't support integrity data, so we provide a whitelist of targets that support it (linear, delay and striped). The targets that support passing integrity data to the lower device are marked with the flag DM_TARGET_PASSES_INTEGRITY. The DM core will now advertise integrity data on a DM device only if all the targets support the integrity data. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer