kernel/linux.git/drivers/md/bcache/sysfs.c, branch v4.14.286

bcache: fix input overflow to sequential_cutoff

2019-04-05T20:31:34+00:00

[ Upstream commit 8c27a3953e92eb0b22dbb03d599f543a05f9574e ] People may set sequential_cutoff of a cached device via sysfs file, but current code does not check input value overflow. E.g. if value 4294967295 (UINT_MAX) is written to file sequential_cutoff, its value is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value will be 0. This is an unexpected behavior. This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert input string to unsigned integer value, and limit its range in [0, UINT_MAX]. Then the input overflow can be fixed. Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

bcache: fix input overflow to cache set sysfs file io_error_halflife

2019-04-05T20:31:34+00:00

[ Upstream commit a91fbda49f746119828f7e8ad0f0aa2ab0578f65 ] Cache set sysfs entry io_error_halflife is used to set c->error_decay. c->error_decay is in type unsigned int, and it is converted by strtoul_or_return(), therefore overflow to c->error_decay is possible for a large input value. This patch fixes the overflow by using strtoul_safe_clamp() to convert input string to an unsigned long value in range [0, UINT_MAX], then divides by 88 and set it to c->error_decay. Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

bcache: return attach error when no cache set exist

2018-04-26T09:02:18+00:00

[ Upstream commit 7f4fc93d4713394ee8f1cd44c238e046e11b4f15 ] I attach a back-end device to a cache set, and the cache set is not registered yet, this back-end device did not attach successfully, and no error returned: [root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach [root]# In sysfs_attach(), the return value "v" is initialized to "size" in the beginning, and if no cache set exist in bch_cache_sets, the "v" value would not change any more, and return to sysfs, sysfs regard it as success since the "size" is a positive number. This patch fixes this issue by assigning "v" with "-ENOENT" in the initialization. Signed-off-by: Tang Junhui Reviewed-by: Michael Lyle Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

bcache: fix for data collapse after re-attaching an attached device

2018-04-26T09:02:18+00:00

[ Upstream commit 73ac105be390c1de42a2f21643c9778a5e002930 ] back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by: Tang Junhui Reviewed-by: Michael Lyle Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

bcache: Correct return value for sysfs attach errors

2017-09-06T14:17:33+00:00

If you encounter any errors in bch_cached_dev_attach it will return a negative error code. The variable 'v' which stores the result is unsigned, thus user space sees a very large value returned for bytes written which can cause incorrect user space behavior. Utilize 1 signed variable to use throughout the function to preserve error return capability. Signed-off-by: Tony Asleson Acked-by: Coly Li Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe

bcache: gc does not work when triggering by manual command

2017-09-06T14:17:33+00:00

I try to execute the following command to trigger gc thread: [root@localhost internal]# echo 1 > trigger_gc But it does not work, I debug the code in gc_should_run(), It works only if in invalidating or sectors_to_gc < 0. So set sectors_to_gc to -1 to meet the condition when we trigger gc by manual command. (Code comments aded by Coly Li) Signed-off-by: Tang Junhui Reviewed-by: Coly Li Signed-off-by: Jens Axboe

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:27+00:00

We are going to split out of , which will have to be picked up from other headers and .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

bcache: remove nested function usage

2014-03-18T19:39:28+00:00

Uninlined nested functions can cause crashes when using ftrace, as they don't follow the normal calling convention and confuse the ftrace function graph tracer as it examines the stack. Also, nested functions are supported as a gcc extension, but may fail on other compilers (e.g. llvm). Signed-off-by: John Sheu

bcache: Rework btree cache reserve handling

2014-03-18T19:23:35+00:00

This changes the bucket allocation reserves to use _real_ reserves - separate freelists - instead of watermarks, which if nothing else makes the current code saner to reason about and is going to be important in the future when we add support for multiple btrees. It also adds btree_check_reserve(), which checks (and locks) the reserves for both bucket allocation and memory allocation for btree nodes; the old code just kinda sorta assumed that since (e.g. for btree node splits) it had the root locked and that meant no other threads could try to make use of the same reserve; this technically should have been ok for memory allocation (we should always have a reserve for memory allocation (the btree node cache is used as a reserve and we preallocate it)), but multiple btrees will mean that locking the root won't be sufficient anymore, and for the bucket allocation reserve it was technically possible for the old code to deadlock. Signed-off-by: Kent Overstreet