kernel/linux.git/drivers/mailbox/Kconfig, branch v5.15.7

mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module

2021-08-30T04:50:15+00:00

This patch enables the qcom_ipcc driver to be loaded as a module. IPCC is fairly core to system, so as such it should never be unloaded. It registers as a mailbox + irq controller and the irq controller drivers in kernel are not supposed to be unloaded as they don't have the visibility over the clients consuming the irqs. Hence adding supress_bind_attrs to disable bind/unbind via sysfs. Signed-off-by: Amit Pundir Reviewed-by: Manivannan Sadhasivam Signed-off-by: Jassi Brar

mbox: add polarfire soc system controller mailbox

2021-06-26T17:06:48+00:00

This driver adds support for the single mailbox channel of the MSS system controller on the Microchip PolarFire SoC. Signed-off-by: Conor Dooley Signed-off-by: Jassi Brar

mailbox: fix various typos in comments

2021-04-14T01:07:35+00:00

Fix trivial typos in mailbox driver comments. s/Intergrated/Integrated/ s/extenstion/extension/ s/atleast/at least/ s/commnunication/communication/ s/assgined/assigned/ s/commnunication/communication/ s/recevied/received/ s/succeded/succeeded/ s/implmentation/implementation/ s/definiation/definition/ s/traget/target/ s/wont/won't/ Cc: trivial@kernel.org Signed-off-by: Tom Saeger Reviewed-by: Randy Dunlap Signed-off-by: Jassi Brar

mailbox: arm_mhuv2: Add driver

2020-12-10T01:26:02+00:00

This adds driver for the ARM MHUv2 (Message Handling Unit) mailbox controller. This is based on the accepted DT bindings of the controller and supports combination of both transport protocols, i.e. doorbell and data-transfer. Transmitting and receiving data through the mailbox framework is done through struct arm_mhuv2_mbox_msg. Based on the initial work done by Morten Borup Petersen from ARM. Co-developed-by: Tushar Khandelwal Signed-off-by: Tushar Khandelwal Tested-by: Usama Arif Signed-off-by: Viresh Kumar Signed-off-by: Jassi Brar

mailbox: stm32-ipcc: add COMPILE_TEST dependency

2020-12-02T01:17:20+00:00

This allows compiling the driver on architectures where the hardware is not available. Most other mailbox drivers support this as well. Signed-off-by: Martin Kaiser Reviewed-by: Fabien Dessenne Signed-off-by: Jassi Brar

mailbox: Add support for Qualcomm IPCC

2020-05-30T23:43:23+00:00

Add support for the Inter-Processor Communication Controller (IPCC) block from Qualcomm that coordinates the interrupts (inbound & outbound) for Multiprocessor (MPROC), COMPUTE-Level0 (COMPUTE-L0) & COMPUTE-Level1 (COMPUTE-L1) protocols for the Application Processor Subsystem (APSS). This driver is modeled as an irqchip+mailbox driver. The irqchip part helps in receiving the interrupts from the IPCC clients such as modems, DSPs, PCI-E etc... and forwards them to respective entities in APSS. On the other hand, the mailbox part is used to send interrupts to the IPCC clients from the entities of APSS. Reviewed-by: Bjorn Andersson Signed-off-by: Raghavendra Rao Ananta Signed-off-by: Venkata Narendra Kumar Gutta Signed-off-by: Bjorn Andersson [mani: moved to mailbox, added static mbox channels and cleanups] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Jassi Brar

mailbox: sprd: Add Spreadtrum mailbox driver

2020-05-30T23:05:33+00:00

The Spreadtrum mailbox controller supports 8 channels to communicate with MCUs, and it contains 2 different parts: inbox and outbox, which are used to send and receive messages by IRQ mode. Signed-off-by: Baolin Wang Signed-off-by: Jassi Brar

mailbox: sun6i-msgbox: Add a new mailbox driver

2020-03-20T04:00:32+00:00

Allwinner sun6i, sun8i, sun9i, and sun50i SoCs contain a hardware message box used for communication between the ARM CPUs and the ARISC management coprocessor. This mailbox contains 8 unidirectional 4-message FIFOs. Add a driver for it, so it can be used with the Linux mailbox framework. Reviewed-by: Philipp Zabel Signed-off-by: Samuel Holland Signed-off-by: Jassi Brar

mailbox: omap: Add support for TI K3 SoCs

2019-07-11T04:08:44+00:00

The TI K3 AM65x and J721E family of SoCs have a new Mailbox IP that is based on the existing Mailbox IP present in OMAP architecture based SoCs. Each instance of the legacy OMAP Mailbox IP is now a single cluster within the newer Mailbox IP instance on K3 architecture based SoCs. A single K3 Mailbox IP instance has multiple clusters with each cluster providing the same functionality as the existing OMAP Mailbox IP. Reuse the existing OMAP Mailbox driver to extend the support for this newer IP present within the Main NavSS block on K3 SoCs. The K3 family of SoCs use 64-bit ARMv8 processors for running Linux, so the driver is also enhanced to deal with the differences between the 32-bit message payloads and the 64-bit pointers used by the client drivers. Signed-off-by: Suman Anna Signed-off-by: Jassi Brar

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman