kernel/linux.git/drivers/leds, branch v6.19.11

leds: qcom-lpg: Check the return value of regmap_bulk_write()

2026-02-26T23:01:27+00:00

[ Upstream commit f42033b5ce8c79c5db645916c9a72ee3e10cecfa ] The lpg_lut_store() function currently ignores the return value of regmap_bulk_write() and always returns 0. This can cause hardware write failures to go undetected, leading the caller to believe LUT programming succeeded when it may have failed. Check the return value of regmap_bulk_write() in lpg_lut_store and return the error to the caller on failure. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Haotian Zhang Link: https://patch.msgid.link/20260108175133.638-1-vulab@iscas.ac.cn Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: expresswire: Fix chip state breakage

2026-02-26T23:01:27+00:00

[ Upstream commit f4b830a5371914239756b0599e5dc9d4c328e387 ] It is possible to put the KTD2801 chip in an unknown/undefined state by changing the brightness very rapidly (for example, with a brightness slider). When this happens, the brightness is stuck on max and cannot be changed until the chip is power cycled. Fix this by disabling interrupts while talking to the chip. While at it, make expresswire_power_off() use fsleep() and also unexport some functions meant to be internal. Fixes: 1368d06dd2c9 ("leds: Introduce ExpressWire library") Tested-by: Karel Balej Signed-off-by: Duje Mihanović Link: https://patch.msgid.link/20251217-expresswire-fix-v2-1-4a02b10acd96@dujemihanovic.xyz Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: led-class: Only Add LED to leds_list when it is fully ready

2026-01-20T16:02:01+00:00

Before this change the LED was added to leds_list before led_init_core() gets called adding it the list before led_classdev.set_brightness_work gets initialized. This leaves a window where led_trigger_register() of a LED's default trigger will call led_trigger_set() which calls led_set_brightness() which in turn will end up queueing the *uninitialized* led_classdev.set_brightness_work. This race gets hit by the lenovo-thinkpad-t14s EC driver which registers 2 LEDs with a default trigger provided by snd_ctl_led.ko in quick succession. The first led_classdev_register() causes an async modprobe of snd_ctl_led to run and that async modprobe manages to exactly hit the window where the second LED is on the leds_list without led_init_core() being called for it, resulting in: ------------[ cut here ]------------ WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390 Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025 ... Call trace: __flush_work+0x344/0x390 (P) flush_work+0x2c/0x50 led_trigger_set+0x1c8/0x340 led_trigger_register+0x17c/0x1c0 led_trigger_register_simple+0x84/0xe8 snd_ctl_led_init+0x40/0xf88 [snd_ctl_led] do_one_initcall+0x5c/0x318 do_init_module+0x9c/0x2b8 load_module+0x7e0/0x998 Close the race window by moving the adding of the LED to leds_list to after the led_init_core() call. Cc: stable@vger.kernel.org Fixes: d23a22a74fde ("leds: delay led_set_brightness if stopping soft-blink") Signed-off-by: Hans de Goede Reviewed-by: Sebastian Reichel Link: https://patch.msgid.link/20251211163727.366441-1-johannes.goede@oss.qualcomm.com Signed-off-by: Lee Jones

Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-12-06T01:29:04+00:00

Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...

leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM

2025-11-20T15:25:19+00:00

The PWM signal from the LPG channel can be routed to PMIC GPIOs with proper GPIO configuration, and it is not necessary to enable the TRILED channel in that case. This also applies to the LPG channels that mapped to TRILED channels. Additionally, enabling the TRILED channel unnecessarily would cause a voltage increase in its power supply. Hence remove it. Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG") Signed-off-by: Fenglin Wu Reviewed-by: Bjorn Andersson Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-2-84b6dbdc774a@oss.qualcomm.com Signed-off-by: Lee Jones

leds: rgb: leds-qcom-lpg: Allow LED_COLOR_ID_MULTI

2025-11-20T14:25:37+00:00

There's nothing special about RGB multi-led instances. Allow any color combinations by simply extending the "if _RGB" checks. Signed-off-by: Konrad Dybcio Reviewed-by: Bjorn Andersson Reviewed-by: Dmitry Baryshkov Reviewed-by: David Heidelberg Link: https://patch.msgid.link/20251117-topic-lpg_multi-v1-1-05604374a2dd@oss.qualcomm.com Signed-off-by: Lee Jones

leds: pwm: Reorder include files to alphabetic order

2025-11-20T12:20:24+00:00

Reorder include files to alphabetic order to simplify maintenance No functional change. Signed-off-by: LI Qingwu Link: https://patch.msgid.link/20251117054511.730246-3-Qing-wu.Li@leica-geosystems.com.cn Signed-off-by: Lee Jones

leds: pwm: Add optional GPIO enable pin support

2025-11-20T12:20:21+00:00

Add support for optional GPIO-based enable pin control to PWM LED driver. Some PWM LED driver chips like TPS92380 and LT3743 require a separate enable signal in addition to PWM control. Implement support for such GPIO control through the "enable-gpios" device tree property, activating the pin when LED brightness is non-zero and deactivating it when off. Tested on i.MX8MP EVK with TPS92380 LED driver chip Signed-off-by: LI Qingwu Link: https://patch.msgid.link/20251117054511.730246-2-Qing-wu.Li@leica-geosystems.com.cn Signed-off-by: Lee Jones

syscore: Pass context data to callbacks

2025-11-14T09:01:52+00:00

Several drivers can benefit from registering per-instance data along with the syscore operations. To achieve this, move the modifiable fields out of the syscore_ops structure and into a separate struct syscore that can be registered with the framework. Add a void * driver data field for drivers to store contextual data that will be passed to the syscore ops. Acked-by: Rafael J. Wysocki (Intel) Signed-off-by: Thierry Reding

leds: trigger: Replace use of system_wq() with system_percpu_wq()

2025-11-13T15:55:39+00:00

Currently if a user enqueues a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed without refactoring the API. This patch continues the effort to refactor worqueue APIs, which has begun with the change introducing new workqueues and a new alloc_workqueue flag: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") system_wq should be the per-cpu workqueue, yet in this name nothing makes that clear, so replace system_wq with system_percpu_wq. The old wq (system_wq) will be kept for a few release cycles. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Link: https://patch.msgid.link/20251105111924.141555-1-marco.crivellari@suse.com Signed-off-by: Lee Jones