kernel/linux.git/drivers/leds, branch v6.1.87

leds: sgm3140: Add missing timer cleanup and flash gpio control

2024-03-26T22:20:52+00:00

[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ] Enabling strobe and then setting brightness to 0 causes the driver to enter invalid state after strobe end timer fires. We should cancel strobe mode resources when changing brightness (aka torch mode). Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver") Signed-off-by: Ondrej Jirman Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: aw2013: Unlock mutex before destroying it

2024-03-26T22:20:52+00:00

[ Upstream commit 6969d0a2ba1adc9ba6a49b9805f24080896c255c ] In the probe() callback in case of error mutex is destroyed being locked which is not allowed so unlock the mutex before destroying. Fixes: 59ea3c9faf32 ("leds: add aw2013 driver") Signed-off-by: George Stark Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231214173614.2820929-2-gnstark@salutedevices.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: trigger: panic: Don't register panic notifier if creating the trigger failed

2024-02-05T20:12:57+00:00

[ Upstream commit afacb21834bb02785ddb0c3ec197208803b74faa ] It doesn't make sense to register the panic notifier if creating the panic trigger failed. Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/8a61e229-5388-46c7-919a-4d18cc7362b2@gmail.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: aw2013: Select missing dependency REGMAP_I2C

2024-01-25T23:27:45+00:00

[ Upstream commit 75469bb0537ad2ab0fc1fb6e534a79cfc03f3b3f ] The AW2013 driver uses devm_regmap_init_i2c, so REGMAP_I2C needs to be selected. Otherwise build process may fail with: ld: drivers/leds/leds-aw2013.o: in function `aw2013_probe': leds-aw2013.c:345: undefined reference to `__devm_regmap_init_i2c' Signed-off-by: Dang Huynh Acked-by: Nikita Travkin Fixes: 59ea3c9faf32 ("leds: add aw2013 driver") Link: https://lore.kernel.org/r/20231103114203.1108922-1-danct12@riseup.net Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: ledtrig-tty: Free allocated ttyname buffer on deactivate

2024-01-20T10:50:11+00:00

commit 25054b232681c286fca9c678854f56494d1352cc upstream. The ttyname buffer for the ledtrig_tty_data struct is allocated in the sysfs ttyname_store() function. This buffer must be released on trigger deactivation. This was missing and is thus a memory leak. While we are at it, the TTY handler in the ledtrig_tty_data struct should also be returned in case of the trigger deactivation call. Cc: stable@vger.kernel.org Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger") Signed-off-by: Florian Eckert Reviewed-by: Uwe Kleine-König Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20231127081621.774866-1-fe@dev.tdt.de Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

leds: trigger: ledtrig-cpu:: Fix 'output may be truncated' issue for 'cpu'

2023-11-20T10:52:08+00:00

[ Upstream commit ff50f53276131a3059e8307d11293af388ed2bcd ] In order to teach the compiler that 'trig->name' will never be truncated, we need to tell it that 'cpu' is not negative. When building with W=1, this fixes the following warnings: drivers/leds/trigger/ledtrig-cpu.c: In function ‘ledtrig_cpu_init’: drivers/leds/trigger/ledtrig-cpu.c:155:56: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 5 [-Werror=format-truncation=] 155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu); | ^~ drivers/leds/trigger/ledtrig-cpu.c:155:52: note: directive argument in the range [-2147483648, 7] 155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu); | ^~~~~~~ drivers/leds/trigger/ledtrig-cpu.c:155:17: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8 155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 8f88731d052d ("led-triggers: create a trigger for CPU activity") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/3f4be7a99933cf8566e630da54f6ab913caac432.1695453322.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: pwm: Don't disable the PWM when the LED should be off

2023-11-20T10:52:08+00:00

[ Upstream commit 76fe464c8e64e71b2e4af11edeef0e5d85eeb6aa ] Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false) gives no guarantees what the PWM output does. It might freeze where it currently is, or go in a High-Z state or drive the active or inactive state, it might even continue to toggle. To ensure that the LED gets really disabled, don't disable the PWM even when .duty_cycle is zero. This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is one of those that freezes its output on disable, so if you disable an LED that is full on, it stays on. If you disable a LED with half brightness it goes off in 50% of the cases and full on in the other 50%. Fixes: 41c42ff5dbe2 ("leds: simple driver for pwm driven LEDs") Reported-by: Rogan Dawes Reported-by: Fabio Estevam Signed-off-by: Uwe Kleine-König Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20230922192834.1695727-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: turris-omnia: Do not use SMBUS calls

2023-11-20T10:52:08+00:00

[ Upstream commit 6de283b96b31b4890e3ee8c86caca2a3a30d1011 ] The leds-turris-omnia driver uses three function for I2C access: - i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which cause an emulated SMBUS transfer, - i2c_master_send(), which causes an ordinary I2C transfer. The Turris Omnia MCU LED controller is not semantically SMBUS, it operates as a simple I2C bus. It does not implement any of the SMBUS specific features, like PEC, or procedure calls, or anything. Moreover the I2C controller driver also does not implement SMBUS, and so the emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for the SMBUS calls, which gives an unnecessary overhead. When I first wrote the driver, I was unaware of these facts, and I simply used the first function that worked. Drop the I2C SMBUS calls and instead use simple I2C transfers. Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Signed-off-by: Marek Behún Link: https://lore.kernel.org/r/20230918161104.20860-2-kabel@kernel.org Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

leds: turris-omnia: Drop unnecessary mutex locking

2023-11-20T10:52:08+00:00

[ Upstream commit 760b6b7925bf09491aafa4727eef74fc6bf738b0 ] Do not lock driver mutex in the global LED panel brightness sysfs accessors brightness_show() and brightness_store(). The mutex locking is unnecessary here. The I2C transfers are guarded by I2C core locking mechanism, and the LED commands itself do not interfere with other commands. Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Signed-off-by: Marek Behún Reviewed-by: Lee Jones Link: https://lore.kernel.org/r/20230802160748.11208-2-kabel@kernel.org Signed-off-by: Lee Jones Stable-dep-of: 6de283b96b31 ("leds: turris-omnia: Do not use SMBUS calls") Signed-off-by: Sasha Levin

leds: Drop BUG_ON check for LED_COLOR_ID_MULTI

2023-10-10T20:00:40+00:00

[ Upstream commit 9dc1664fab2246bc2c3e9bf2cf21518a857f9b5b ] Commit c3f853184bed ("leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false") fixed a no-op BUG_ON. This turned out to cause a regression, since some in-tree device-tree files already use LED_COLOR_ID_MULTI. Drop the BUG_ON altogether. Fixes: c3f853184bed ("leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false") Reported-by: Da Xue Closes: https://lore.kernel.org/linux-leds/ZQLelWcNjjp2xndY@duo.ucw.cz/T/ Signed-off-by: Marek Behún Link: https://lore.kernel.org/r/20230918140724.18634-1-kabel@kernel.org Signed-off-by: Lee Jones Signed-off-by: Sasha Levin