kernel/linux.git/drivers/leds/trigger/Kconfig, branch v6.12.80

leds: trigger: Add new LED Input events trigger

2024-06-21T10:57:17+00:00

Add a new trigger which turns LEDs on when there is input (/dev/input/event*) activity and turns them back off again after there has been no activity for 5 seconds. This is primarily intended to control LED devices which are a backlight for capacitive touch-buttons, such as e.g. the menu / home / back buttons found on the bottom bezel of many somewhat older smartphones and tablets. This can also be used to turn on the keyboard backlight LED on input events and turn the keyboard backlight off again when idle. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240531135910.168965-2-hdegoede@redhat.com Signed-off-by: Lee Jones

ALSA: control-led: Integrate mute led trigger

2024-03-28T10:39:50+00:00

This driver is the only one calling ledtrig_audio_set(), therefore the LED audio trigger isn't usable standalone. So it makes sense to fully integrate LED audio triger handling here. The module aliases ensure that the driver is auto-loaded (if built as module) if a LED device has one of the two audio triggers as default trigger. In addition disable building the old audio mute LED trigger. Signed-off-by: Heiner Kallweit Reviewed-by: Takashi Iwai Link: https://lore.kernel.org/r/107634e6-d9ad-4a9f-881d-1eb72ea1a5a7@gmail.com Signed-off-by: Lee Jones

leds: triggers: gpio: Rewrite to use trigger-sources

2023-11-01T11:28:58+00:00

By providing a GPIO line as "trigger-sources" in the FWNODE (such as from the device tree) and combining with the GPIO trigger, we can support a GPIO LED trigger in a natural way from the hardware description instead of using the custom sysfs and deprecated global GPIO numberspace. Example: gpio: gpio@0 { compatible "my-gpio"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; #trigger-source-cells = <2>; }; leds { compatible = "gpio-leds"; led-my-gpio { label = "device:blue:myled"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "gpio"; trigger-sources = <&gpio 1 GPIO_ACTIVE_HIGH>; }; }; Make this the norm, unmark the driver as broken. Delete the sysfs handling of GPIOs. Since GPIO descriptors inherently can describe inversion, the inversion handling can just be deleted. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20230926-gpio-led-trigger-dt-v2-3-e06e458b788e@linaro.org Signed-off-by: Lee Jones

leds: Mark GPIO LED trigger broken

2023-03-16T15:08:44+00:00

The GPIO LED trigger exposes a userspace ABI where a user can echo a GPIO number from the global GPIO numberspace into a file that will trigger a certain LED when active. This is problematic because the global GPIO numberspace is inherently instable. The trigger came about at a time when systems had one GPIO controller that defined hard-wired GPIOs numbered 0..N and this number space was stable. We have since moved to dynamic allocation of GPIO numbers and there is no real guarantee that a GPIO number will stay consistent even across a reboot: consider a USB attached GPIO controller for example. Or two. Or the effect of probe order after adding -EPROBE_DEFER to the kernel. The trigger was added to support keypad LEDs on the Nokia n810 from the GPIO event when a user slides up/down the keypad. This is arch/arm/boot/dts/omap2420-n810.dts. A userspace script is needed to activate the trigger. This will be broken unless the script was updated recently since the OMAP GPIO controller now uses dynamic GPIO number allocations. I want to know that this trigger has active users that cannot live without it if we are to continue to support it. Option if this is really needed: I can develop a new trigger that can associate GPIOs with LEDs as triggers using device tree, which should also remove the use of userspace custom scripts to achieve this and be much more trustworthy, if someone with the Nokia n810 or a device with a similar need is willing to test it. Suggested-by Pavel Machek Signed-off-by: Linus Walleij Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230314210059.419159-1-linus.walleij@linaro.org

leds: trigger: Disable CPU trigger on PREEMPT_RT

2021-10-13T18:07:57+00:00

The CPU trigger is invoked on ARM from CPU-idle. That trigger later invokes led_trigger_event() which may invoke the callback of the actual driver. That driver can acquire a spinlock_t which is okay on kernel without PREEMPT_RT. On a PREEMPT_RT enabled kernel this lock is turned into a sleeping lock and must not be acquired with disabled interrupts. Disable the CPU trigger on PREEMPT_RT. Signed-off-by: Sebastian Andrzej Siewior Link: https://lkml.kernel.org/r/20210924111501.m57cwwn7ahiyxxdd@linutronix.de Signed-off-by: Pavel Machek

leds: trigger: remove reference to obsolete CONFIG_IDE_GD_ATA

2021-08-18T06:59:47+00:00

Commit b7fb14d3ac63 ("ide: remove the legacy ide driver") removes the definition of the config IDE_GD_ATA. So, remove the obsolete reference in ./drivers/leds/trigger/Kconfig. Signed-off-by: Lukas Bulwahn Signed-off-by: Pavel Machek

leds: trigger: implement a tty trigger

2021-01-15T09:22:26+00:00

Usage is as follows: myled=ledname tty=ttyS0 echo tty > /sys/class/leds/$myled/trigger echo $tty > /sys/class/leds/$myled/ttyname . When this new trigger is active it periodically checks the tty's statistics and when it changed since the last check the led is flashed once. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210113173018.bq2fkea2o3yp6rf6@pengutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

2019-07-09T15:59:39+00:00

Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property

docs: leds: convert to ReST

2019-06-28T18:57:31+00:00

Rename the leds documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman