kernel/linux.git/drivers/leds/Kconfig, branch v6.18.21

leds: Kconfig: Fix spelling mistake "limitiation" -> "limitation"

2025-08-18T08:48:13+00:00

There is a spelling mistake in the LEDS_BD2606MVV config. Fix it. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20250724112030.142121-1-colin.i.king@gmail.com Signed-off-by: Lee Jones

leds: Provide skeleton KUnit testing for the LEDs framework

2025-05-14T08:25:02+00:00

Apply a very basic implementation of KUnit LED testing. More tests / use-cases will be added steadily over time. CMD: tools/testing/kunit/kunit.py run --kunitconfig drivers/leds OUTPUT: [15:34:19] Configuring KUnit Kernel ... [15:34:19] Building KUnit Kernel ... Populating config with: $ make ARCH=um O=.kunit olddefconfig Building with: $ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=20 [15:34:22] Starting KUnit Kernel (1/1)... [15:34:22] ============================================================ Running tests with: $ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [15:34:23] ===================== led (1 subtest) ====================== [15:34:23] [PASSED] led_test_class_register [15:34:23] ======================= [PASSED] led ======================= [15:34:23] ============================================================ [15:34:23] Testing complete. Ran 1 tests: passed: 1 [15:34:23] Elapsed time: 4.268s total, 0.001s configuring, 3.048s building, 1.214s running Link: https://lore.kernel.org/r/20250424144544.1438584-1-lee@kernel.org Signed-off-by: Lee Jones

leds: Do not enable by default during compile testing

2025-05-14T08:24:58+00:00

Enabling the compile test should not cause automatic enabling of all drivers, but only allow to choose to compile them. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250417074656.81626-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones

Merge tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

2025-03-29T21:42:59+00:00

Pull LED updates from Lee Jones: - pca955x: Add HW blink support, utilizing PWM0. It supports one frequency across all blinking LEDs and falls back to software blink if different frequencies are requested. - trigger: netdev: Allow configuring LED blink interval via .blink_set even when HW offload (.hw_control) is enabled. - led-core: Fix a race condition where a quick LED_OFF followed by another brightness set could leave the LED off incorrectly, especially noticeable after the introduction of the ordered workqueue. - qcom-lpg: Add support for 6-bit PWM resolution alongside the existing 9-bit support. - qcom-lpg: Fix PWM value capping to respect the selected resolution (6-bit or 9-bit) for normal PWMs. - qcom-lpg: Fix PWM value capping to respect the selected resolution for Hi-Res PWMs. - qcom-lpg: Fix calculation of the best period for Hi-Res PWMs to prevent requested duty cycles from exceeding the maximum allowed by the selected resolution. - st1202: Add a check for the error code returned by devm_mutex_init(). - pwm-multicolor: Add a check for the return value of fwnode_property_read_u32(). - st1202: Ensure hardware initialization (st1202_setup) happens before DT node processing (st1202_dt_init). - Kconfig: leds-st1202: Add select LEDS_TRIGGER_PATTERN as it's required by the driver. - lp8860: Drop unneeded explicit assignment to REGCACHE_NONE. - pca955x: Refactor code with helper functions and rename some functions/variables for clarity. - pca955x: Pass driver data pointers instead of the I2C client to helper functions. - pca955x: Optimize probe LED selection logic to reduce I2C operations. - pca955x: Revert the removal of pca95xx_num_led_regs() (renaming it to pca955x_num_led_regs) as it's needed for HW blink support. - st1202: Refactor st1202_led_set() to use the !! operator for boolean conversion. - st1202: Minor spacing and proofreading edits in comments. - Directory Rename: Rename the drivers/leds/simple directory to drivers/leds/simatic as the drivers within are not simple. - mlxcpld: Remove unused include of acpi.h. - nic78bx: Tidy up the ACPI ID table (remove ACPI_PTR, use mod_devicetable.h, remove explicit driver_data initializer). - tlc591xx: Convert text binding to YAML format, add child node constraints, and fix typos/formatting in the example. - qcom-lpg: Document the qcom,pm8937-pwm compatible string as a fallback for qcom,pm8916-pwm. * tag 'leds-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (23 commits) leds: nic78bx: Tidy up ACPI ID table leds: mlxcpld: Remove unused ACPI header inclusion leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs leds: rgb: leds-qcom-lpg: Fix pwm resolution max for Hi-Res PWMs leds: rgb: leds-qcom-lpg: Fix pwm resolution max for normal PWMs leds: Rename simple directory to simatic leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN leds: leds-st1202: Spacing and proofreading editing leds: leds-st1202: Initialize hardware before DT node child operations leds: pwm-multicolor: Add check for fwnode_property_read_u32 leds: rgb: leds-qcom-lpg: Add support for 6-bit PWM resolution leds: Fix LED_OFF brightness race Revert "leds-pca955x: Remove the unused function pca95xx_num_led_regs()" leds: st1202: Refactor st1202_led_set() to use !! operator for boolean conversion dt-bindings: leds: qcom-lpg: Document PM8937 PWM compatible leds: pca955x: Add HW blink support leds: pca955x: Optimize probe LED selection leds: pca955x: Use pointers to driver data rather than I2C client leds: pca955x: Refactor with helper functions and renaming dt-bindings: leds: Convert leds-tlc591xx.txt to yaml format ...

leds: nic78bx: Tidy up ACPI ID table

2025-03-21T09:49:37+00:00

Tidy up ACPI ID table: - Drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h and other necessary headers - Remove explicit driver_data initializer - Drop comma in the terminator entry With that done, extend compile test coverage. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250313161630.415515-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones

leds: Rename simple directory to simatic

2025-03-21T09:21:56+00:00

The drivers contained in this directory are not simplistic. Signed-off-by: Lee Jones

leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN

2025-03-13T15:28:27+00:00

leds-st1202 requires the LED Pattern Trigger (LEDS_TRIGGER_PATTERN), which is not selected when LED Trigger support is (LEDS_TRIGGERS). To reproduce this: - make menuconfig KCONFIG_CONFIG= - select LEDS_ST1202 dependencies OF, I2C and LEDS_CLASS. - select LEDS_ST1202 - LEDS_TRIGGERS is selected but LEDS_TRIGGER_PATTERN isn't. The absence of LEDS_TRIGGER_PATTERN explicitly required can lead to builds in which LEDS_ST1202 is selected while LEDS_TRIGGER_PATTERN isn't. The direct result of that would be that /sys/class/leds//hw_pattern wouldn't be available and there would be no way of interacting with the driver and hardware from user space. Add select LEDS_TRIGGER_PATTERN to Kconfig to meet the requirement and indirectly document it as well. Signed-off-by: Manuel Fombuena Link: https://lore.kernel.org/r/CWLP123MB5473F4DF3A668F7DD057A280C5C22@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM Signed-off-by: Lee Jones

leds: max77705: Add LEDs support

2025-02-20T16:38:37+00:00

This adds basic support for LEDs for the max77705 PMIC. Signed-off-by: Dzmitry Sankouski Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-7-8b06685b6612@gmail.com Signed-off-by: Lee Jones

Merge tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

2025-01-22T17:19:36+00:00

Pull LED updates from Lee Jones: - Allow struct bin_attribute instances to be placed in read-only memory for enhanced protection - Fix a memory leak in the cht-wcove driver by using devm_led_classdev_register() - Fix an OF node reference leak in the netxbig driver - Ensure PWM is disabled properly in pwm-multicolor suspend - Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlight drivers - Add support for STMicroelectronics's LED1202 12-channel LED driver - Convert LP8860 bindings to YAML format - Add bindings for the TI LP8864/LP8866 LED drivers - Add LED1202 LED controller bindings - Fix path to color definitions in leds-class-multicolor.yaml - Add pm660l compatible to qcom,spmi-flash-led bindings - Extend cznic,turris-omnia-leds binding with interrupts property - Add documentation for the STMicroelectronics LED1202 driver - Add entry for AAEON UP board FPGA drivers in MAINTAINERS - Fix a wrong format specifier in the ledtrig-activity driver - Fix a bug in the lp8860 driver where only half of the EEPROM was written * tag 'leds-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits) leds: triggers: Constify 'struct bin_attribute' leds: cht-wcove: Use devm_led_classdev_register() to avoid memory leak leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights dt-bindings: leds: Convert LP8860 into YAML format leds: Add LED1202 I2C driver dt-bindings: leds: Add LED1202 LED Controller Documentation:leds: Add leds-st1202.rst leds: pwm-multicolor: Disable PWM when going to suspend leds: netxbig: Fix an OF node reference leak in netxbig_leds_get_of_pdata() turris-omnia-mcu-interface.h: Move macro definitions outside of enums MAINTAINERS: Add entry for AAEON UP board FPGA drivers leds: Add AAEON UP board LED driver leds: trigger: netdev: Check offload ability on interface up leds: turris-omnia: Use uppercase first letter in all comments leds: turris-omnia: Use dev_err_probe() where appropriate leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change leds: turris-omnia: Document driver private structures dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property ...

leds: lp8864: Add support for Texas Instruments LP8864, LP8864S, LP8866 LED-backlights

2025-01-09T10:43:34+00:00

Add driver for TI LP8864, LP8864S, LP8866 4/6 channel LED-backlight drivers with I2C interface. Link: https://www.ti.com/lit/gpn/lp8864-q1 Link: https://www.ti.com/lit/gpn/lp8864s-q1 Link: https://www.ti.com/lit/gpn/lp8866-q1 Link: https://www.ti.com/lit/gpn/lp8866s-q1 Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20241218210829.73191-3-alexander.sverdlin@siemens.com Signed-off-by: Lee Jones