kernel/linux.git/drivers/irqchip, branch v4.19.112

irqchip/gic-v3-its: Fix misuse of GENMASK macro

2020-03-05T15:42:12+00:00

[ Upstream commit 20faba848752901de23a4d45a1174d64d2069dde ] Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches Signed-off-by: Thomas Gleixner Acked-by: Marc Zyngier Link: https://lkml.kernel.org/r/ab5deb4fc3cd604cb620054770b7d00016d736bc.1562734889.git.joe@perches.com Signed-off-by: Sasha Levin

irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL

2020-02-24T07:34:53+00:00

[ Upstream commit 107945227ac5d4c37911c7841b27c64b489ce9a9 ] It looks like an obvious mistake to use its_mapc_cmd descriptor when building the INVALL command block. It so far worked by luck because both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of the ITS command descriptor, but we should not rely on it. Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20191202071021.1251-1-yuzenghui@huawei.com Signed-off-by: Sasha Levin

irqchip/gic-v3: Only provision redistributors that are enabled in ACPI

2020-02-24T07:34:52+00:00

[ Upstream commit 926b5dfa6b8dc666ff398044af6906b156e1d949 ] We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors. It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region. Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse. Signed-off-by: Marc Zyngier Reported-by: Heyi Guo Tested-by: Heyi Guo Link: https://lore.kernel.org/r/20191216062745.63397-1-guoheyi@huawei.com Signed-off-by: Sasha Levin

irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problems

2020-02-24T07:34:50+00:00

[ Upstream commit d6152e6ec9e2171280436f7b31a571509b9287e1 ] The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by: John Garry Signed-off-by: Marc Zyngier Reviewed-by: Hanjun Guo Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com Signed-off-by: Sasha Levin

irqchip: Place CONFIG_SIFIVE_PLIC into the menu

2020-01-23T07:21:36+00:00

commit 0149385537e6d36f535fcd83cfcabf83a32f0836 upstream. Somehow CONFIG_SIFIVE_PLIC ended up outside of the "IRQ chip support" menu. Fixes: 8237f8bc4f6e ("irqchip: add a SiFive PLIC driver") Signed-off-by: Jonathan Neuschäfer Signed-off-by: Marc Zyngier Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Link: https://lore.kernel.org/r/20191002144452.10178-1-j.neuschaefer@gmx.net Signed-off-by: Greg Kroah-Hartman

irqchip: ingenic: Error out if IRQ domain creation failed

2020-01-04T18:12:52+00:00

[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ] If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by: Paul Cercueil Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com Signed-off-by: Sasha Levin

irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary

2020-01-04T18:12:52+00:00

[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ] If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to. Signed-off-by: Florian Fainelli Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com Signed-off-by: Sasha Levin

irqchip/irq-mvebu-icu: Fix wrong private data retrieval

2019-11-24T07:19:40+00:00

[ Upstream commit 2b4dab69dcca13c5be2ddaf1337ae4accd087de6 ] The irq_domain structure has an host_data pointer that just stores private data. It is meant to not be touched by the IRQ core. However, when it comes to MSI, the MSI layer adds its own private data there with a structure that also has a host_data pointer. Because this IRQ domain is an MSI domain, to access private data we should do a d->host_data->host_data, also wrapped as 'platform_msi_get_host_data()'. This bug was lying there silently because the 'icu' structure retrieved this way was just called by dev_err(), only producing a '(NULL device *):' output on the console. Reviewed-by: Thomas Petazzoni Signed-off-by: Miquel Raynal Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin

irqchip/gic-v3-its: Use the exact ITSList for VMOVP

2019-11-10T10:27:31+00:00

[ Upstream commit 8424312516e5d9baeeb0a95d0e4523579b7aa395 ] On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com Signed-off-by: Sasha Levin

irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices

2019-10-01T06:26:08+00:00

[ Upstream commit c9c96e30ecaa0aafa225aa1a5392cb7db17c7a82 ] When allocating a range of LPIs for a Multi-MSI capable device, this allocation extended to the closest power of 2. But on the release path, the interrupts are released one by one. This results in not releasing the "extra" range, leaking the its_device. Trying to reprobe the device will then fail. Fix it by releasing the LPIs the same way we allocate them. Fixes: 8208d1708b88 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size") Reported-by: Jiaxing Luo Tested-by: John Garry Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/f5e948aa-e32f-3f74-ae30-31fee06c2a74@huawei.com Signed-off-by: Sasha Levin