kernel/linux.git/drivers/irqchip/Kconfig, branch linux-4.7.y

irqchip: nps: add 64BIT dependency

2016-05-20T17:20:47+00:00

The newly added nps irqchip driver causes build warnings on ARM64. include/soc/nps/common.h: In function 'nps_host_reg_non_cl': include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] As the driver is only used on ARC, we don't need to see it without COMPILE_TEST elsewhere, and we can avoid the warnings by only building on 32-bit architectures even with CONFIG_COMPILE_TEST. Acked-by: Marc Zyngier Signed-off-by: Arnd Bergmann Signed-off-by: Vineet Gupta Signed-off-by: Linus Torvalds

Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2016-05-19T16:46:18+00:00

Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...

irqchip: add nps Internal and external irqchips

2016-05-09T04:02:31+00:00

Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus Acked-by: Marc Zyngier Acked-by: Vineet Gupta Acked-by: Jason Cooper Cc: Thomas Gleixner

irqchip: Add Layerscape SCFG MSI controller support

2016-05-04T08:58:04+00:00

Some kind of Freescale Layerscape SoC provides a MSI implementation which uses two SCFG registers MSIIR and MSIR to support 32 MSI interrupts for each PCIe controller. The patch is to support it. Signed-off-by: Minghuan Lian Tested-by: Alexander Stein Acked-by: Marc Zyngier Signed-off-by: Marc Zyngier

irqchip/gic-v3: Add support for partitioned PPIs

2016-05-02T11:42:51+00:00

Plug the partitioning layer into the GICv3 PPI code, parsing the DT and building the partition affinities and providing the generic code with partition data and callbacks. Signed-off-by: Marc Zyngier Cc: Mark Rutland Cc: devicetree@vger.kernel.org Cc: Jason Cooper Cc: Will Deacon Cc: Rob Herring Link: http://lkml.kernel.org/r/1460365075-7316-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

irqchip: Add per-cpu interrupt partitioning library

2016-05-02T11:42:51+00:00

We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier Cc: Mark Rutland Cc: devicetree@vger.kernel.org Cc: Jason Cooper Cc: Will Deacon Cc: Rob Herring Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option

2016-03-23T11:02:29+00:00

This config is selected by CONFIG_ARCH_HISI, so there is no point to have it user configurable. While at it move the config option to the proper place in the alphabetically sorted option list. Requested-by: Thomas Gleixner Signed-off-by: Ma Jun Cc: mark.rutland@arm.com Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: Catalin.Marinas@arm.com Cc: guohanjun@huawei.com Cc: Will.Deacon@arm.com Cc: huxinwei@huawei.com Cc: lizefan@huawei.com Cc: dingtianhong@huawei.com Cc: zhaojunhua@hisilicon.com Cc: liguozhu@hisilicon.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1458723993-21044-3-git-send-email-majun258@huawei.com Signed-off-by: Thomas Gleixner

irqchip: Add the Alpine MSIX interrupt controller

2016-03-09T09:37:45+00:00

This patch adds the Alpine MSIX interrupt controller driver. Signed-off-by: Antoine Tenart Signed-off-by: Tsahee Zidenberg Acked-by: Marc Zyngier Signed-off-by: Marc Zyngier

MIPS: Make smp CMP, CPS and MT use the new generic IPI functions

2016-02-25T09:56:58+00:00

This commit does several things to avoid breaking bisectability. 1- Remove IPI init code from irqchip/mips-gic 2- Implement the new irqchip->send_ipi() in irqchip/mips-gic 3- Select GENERIC_IRQ_IPI Kconfig symbol for MIPS_GIC 4- Change MIPS SMP to use the generic IPI implementation Only the SMP variants that use GIC were converted as it's the only irqchip that will have the support for generic IPI for now. Signed-off-by: Qais Yousef Acked-by: Ralf Baechle Cc: Cc: Cc: Cc: Cc: Cc: Qais Yousef Link: http://lkml.kernel.org/r/1449580830-23652-18-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner

irqchip/mips-gic: Add a IPI hierarchy domain

2016-02-25T09:56:57+00:00

Add a new ipi domain on top of the normal domain. MIPS GIC now supports dynamic allocation of an IPI. Signed-off-by: Qais Yousef Acked-by: Ralf Baechle Cc: Cc: Cc: Cc: Cc: Cc: Qais Yousef Link: http://lkml.kernel.org/r/1449580830-23652-13-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner