kernel/linux.git/drivers/interconnect/qcom, branch v6.19.11

interconnect: qcom: qcs8300: fix the num_links for nsp icc node

2026-02-26T23:01:25+00:00

[ Upstream commit 3dc4092fe5c8baf6bf4e882b44615f19564a5076 ] The qxm_nsp node is configured with an incorrect num_links value, causing remoteproc driver to fail probing because it cannot acquire the interconnect path for qxm_nsp -> ebi. This results in the following error in dmesg: platform 26300000.remoteproc: deferred probe pending: qcom_q6v5_pas: failed to acquire interconnect path Set num_links to 2 to match the two link_nodes, allowing remoteproc clients to obtain the correct path handle and vote on qxm_nsp -> ebi. Fixes: 874be3339c85 ("interconnect: qcom: qcs8300: convert to dynamic IDs") Signed-off-by: Raviteja Laggyshetty Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260120-monaco_num_links_fix_nsp_ebi_path-v3-1-536be21ce3ff@oss.qualcomm.com Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

interconnect: qcom: sm6350: enable QoS configuration

2025-11-19T14:03:12+00:00

Enable QoS configuration for master ports with predefined values for priority and urgency forwarding. While this does require some "clocks" to be specified in devicetree to work correctly, thanks to ".qos_requires_clocks = true," this is backwards compatible with old DT as QoS programming will be skipped for aggre1_noc and aggre2_noc when clocks are not provided. Reviewed-by: Dmitry Baryshkov Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-4-6af348cb9c69@fairphone.com Signed-off-by: Georgi Djakov

interconnect: qcom: sm6350: Remove empty BCM arrays

2025-11-19T14:03:09+00:00

Clean up the code by removing empty BCM arrays to save some lines. Reviewed-by: Dmitry Baryshkov Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-3-6af348cb9c69@fairphone.com Signed-off-by: Georgi Djakov

interconnect: qcom: icc-rpmh: Get parent's regmap for nested NoCs

2025-11-19T14:03:05+00:00

Since commit 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe") the icc-rpmh driver supports initializing child NoCs, but those child NoCs also need to be able to get the parent's regmap in order to enable QoS. Change the driver to support that and support programming QoS register. Signed-off-by: Luca Weiss Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-2-6af348cb9c69@fairphone.com Signed-off-by: Georgi Djakov

Merge branch 'icc-dynamic-ids' into icc-next

2025-11-19T13:53:04+00:00

Currently most of Qualcomm interconnect drivers use static IDs, which poses a threat of possible conflicts with other drivers. Rework RPMh interconnect drivers to use dynamic IDs and drop static IDs code. * icc-dynamic-ids interconnect: qcom: icc-rpmh: convert link_nodes to dynamic array interconnect: qcom: sc7280: convert to dynamic IDs interconnect: qcom: sc8180x: convert to dynamic IDs interconnect: qcom: sc8280xp: convert to dynamic IDs interconnect: qcom: sdm845: convert to dynamic IDs interconnect: qcom: sm8250: convert to dynamic IDs interconnect: qcom: x1e80100: convert to dynamic IDs interconnect: qcom: qcs615: convert to dynamic IDs interconnect: qcom: qcs8300: convert to dynamic IDs interconnect: qcom: qdu1000: convert to dynamic IDs interconnect: qcom: sar2130p: convert to dynamic IDs interconnect: qcom: sc7180: convert to dynamic IDs interconnect: qcom: sdm670: convert to dynamic IDs interconnect: qcom: sdx55: convert to dynamic IDs interconnect: qcom: sdx65: convert to dynamic IDs interconnect: qcom: sdx75: convert to dynamic IDs interconnect: qcom: sm6350: convert to dynamic IDs interconnect: qcom: sm7150: convert to dynamic IDs interconnect: qcom: sm8150: convert to dynamic IDs interconnect: qcom: sm8350: convert to dynamic IDs interconnect: qcom: sm8450: convert to dynamic IDs interconnect: qcom: sm8550: convert to dynamic IDs interconnect: qcom: sm8650: convert to dynamic IDs interconnect: qcom: sm8750: convert to dynamic IDs interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS Link: https://lore.kernel.org/r/20251031-rework-icc-v3-0-0575304c9624@oss.qualcomm.com Signed-off-by: Georgi Djakov

Merge branch 'icc-kaanapali' into icc-next

2025-11-18T23:24:58+00:00

Add interconnect dt-bindings and driver support for Qualcomm Kaanapali SoC. * icc-kaanapali dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Kaanapali SoC interconnect: qcom: add Kaanapali interconnect provider driver dt-bindings: interconnect: qcom-bwmon: Document Kaanapali BWMONs Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-0-568bba2cb3e5@oss.qualcomm.com Signed-off-by: Georgi Djakov

interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS

2025-11-02T21:20:18+00:00

Now as all RPMh interconnect drivers were converted to using the dynamic IDs, drop support for non-dynamic ID allocation. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251031-rework-icc-v3-25-0575304c9624@oss.qualcomm.com Signed-off-by: Georgi Djakov

interconnect: qcom: sm8750: convert to dynamic IDs

2025-11-02T21:20:07+00:00

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251031-rework-icc-v3-24-0575304c9624@oss.qualcomm.com Signed-off-by: Georgi Djakov

interconnect: qcom: sm8650: convert to dynamic IDs

2025-11-02T21:20:02+00:00

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Tested-by: Neil Armstrong # on QRD8650 Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251031-rework-icc-v3-23-0575304c9624@oss.qualcomm.com Signed-off-by: Georgi Djakov

interconnect: qcom: sm8550: convert to dynamic IDs

2025-11-02T21:19:57+00:00

Stop using fixed and IDs and covert the platform to use dynamic IDs for the interconnect. This gives more flexibility and also allows us to drop the .num_links member, saving from possible errors related to it being not set or set incorrectly. Tested-by: Neil Armstrong # on QRD8550 Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251031-rework-icc-v3-22-0575304c9624@oss.qualcomm.com Signed-off-by: Georgi Djakov