kernel/linux.git/drivers/input, branch v6.1.176

Input: atkbd - skip deactivate for HONOR BCC-N's internal keyboard

2026-06-19T11:37:15+00:00

commit fb402386af4cdce108ff991a796386de55439735 upstream. After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR BCC-N, aka HONOR MagicBook 14 2026's internal keyboard stops working. Adding the atkbd_deactivate_fixup quirk fixes it. DMI: HONOR BCC-N/BCC-N-PCB, BIOS 1.04 04/07/2026 Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID") Reported-by: Hongfei Ren Link: https://github.com/colorcube/Linux-on-Honor-Magicbook-14-Pro/issues/1#issuecomment-4562679891 Tested-by: Hongfei Ren Cc: stable@kernel.org Signed-off-by: Cryolitia PukNgae Link: https://patch.msgid.link/20260605-honor-v1-1-78e05e491193@linux.dev Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atkbd - add DMI quirk for Lenovo Yoga Air 14 (83QK)

2026-06-19T11:37:15+00:00

commit ad0979fe053e9f2db82da82188256ef6eb41095a upstream. The Lenovo Yoga Air 14 (83QK) laptop keyboard becomes unresponsive after the standard atkbd init sequence. Controlled testing on the actual hardware shows the F5 (ATKBD_CMD_RESET_DIS / deactivate) command specifically corrupts the EC state, causing zero IRQ1 interrupts after init. Skipping only the deactivate command (while keeping F4 ENABLE) resolves the issue completely: both keystroke input and CapsLock LED toggle work correctly. The reverse test - skipping only F4 while keeping F5 - makes the problem worse (zero keystroke interrupts), confirming F5 is the sole culprit. Add a DMI quirk entry for LENOVO/83QK using the existing atkbd_deactivate_fixup callback, consistent with the existing entries for LG Electronics and HONOR FMB-P that address the same EC F5 deactivate issue. Signed-off-by: Zeyu WANG Link: https://patch.msgid.link/20260602170909.14725-1-zeyu.thomas.wang@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490

2026-06-19T11:37:03+00:00

commit 16ca52bc209fa4bf9239cd9e5643e95533476b58 upstream. The Lenovo ThinkPad E490 (PNP ID: LEN2058) has a Synaptics TM3471-020 touchpad that supports SMBus/RMI4 mode but is not listed in smbus_pnp_ids[]. Without this entry, RMI4 over SMBus is not enabled by default, and the touchpad falls back to PS/2 mode. Adding LEN2058 to the passlist enables automatic RMI4 detection without requiring the psmouse.synaptics_intertouch parameter, and matches the behavior of similar ThinkPad models already in the list (E480/LEN2054, E580/LEN2055). Tested on ThinkPad E490 with kernel 7.0.5-zen1 and Arch Linux. RMI4 over SMBus is confirmed working without any kernel parameters. Signed-off-by: Nicolás Bazaes Assisted-by: Claude:claude-sonnet-4-6 Link: https://patch.msgid.link/20260514013552.14234-1-contacto@bazaes.cl Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem

2026-06-19T11:37:03+00:00

commit baa0210fb6a9dc3882509a9411b6d284d88fe30e upstream. When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. Fixes: 50a77c658b80 ("Input: atmel_mxt_ts - download device config using firmware loader") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Reviewed-by: Ricardo Ribalda Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: elan_i2c - validate firmware size before use

2026-06-19T11:37:01+00:00

commit 76b0d0baa9ae9c60e726bbe1b6ff0bec2c993634 upstream. Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/ae2dOgiFvXRm4BHo@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free()

2026-06-19T11:36:59+00:00

commit dab48a7e74e6a394f3aa0461a2b1fb0c7b38fcb8 upstream. The input buffer size is pcu->max_in_size, but pcu->max_out_size is passed to usb_free_coherent(). Change size to match the allocation size. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier Link: https://patch.msgid.link/20260522085412.45430-2-fourier.thomas@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size

2026-06-19T11:36:52+00:00

commit 2905281cbda52ec9df540113b35b835feb5fafd3 upstream. nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len. Cc: Dmitry Torokhov Fixes: 5197424cdccc ("Input: usbtouchscreen - add NEXIO (or iNexio) support") Cc: stable Assisted-by: gkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: uinput - take event lock when submitting FF request "event"

2026-04-18T08:35:56+00:00

commit ff14dafde15c11403fac61367a34fea08926e9ee upstream. To avoid racing with FF playback events and corrupting device's event queue take event_lock spinlock when calling uinput_dev_event() when submitting a FF upload or erase "event". Tested-by: Mikhail Gavrilov Link: https://patch.msgid.link/adXkf6MWzlB8LA_s@google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: uinput - fix circular locking dependency with ff-core

2026-04-18T08:35:55+00:00

commit 4cda78d6f8bf2b700529f2fbccb994c3e826d7c2 upstream. A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) Fixes: ff462551235d ("Input: uinput - switch to the new FF interface") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/ Signed-off-by: Mikhail Gavrilov Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: xpad - add support for Razer Wolverine V3 Pro

2026-04-11T12:16:27+00:00

commit e2b0ae529db4766584e77647cefe3ec15c3d842e upstream. Add device IDs for the Razer Wolverine V3 Pro controller in both wired (0x0a57) and wireless 2.4 GHz dongle (0x0a59) modes. The controller uses the Xbox 360 protocol (vendor-specific class, subclass 93, protocol 1) on interface 0 with an identical 20-byte input report layout, so no additional processing is needed. Signed-off-by: Zoltan Illes Link: https://patch.msgid.link/20260329220031.1325509-1-137647604+ZlordHUN@users.noreply.github.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman