kernel/linux.git/drivers/input/touchscreen, branch v6.19.11

Input: ti_am335x_tsc - fix off-by-one error in wire_order validation

2025-12-19T06:00:07+00:00

The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds access when used as index in 'config_pins[wire_order[i]]'. Since config_pins has 4 elements (indices 0-3), the valid range for wire_order should be 0-3. Fix the off-by-one error by using >= instead of > in the validation check. Signed-off-by: Junjie Cao Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: apple_z2 - fix reading incorrect reports after exiting sleep

2025-12-18T20:17:10+00:00

Under certain conditions (more prevalent after a suspend/resume cycle), the touchscreen controller can send the "boot complete" interrupt before it actually finished booting. In those cases, attempting to read touch data resuls in a stream of "not ready" messages being read and interpreted as a touch report. Check that the response is in fact a touch report and discard it otherwise. Reported-by: pitust Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715; Fixes: 471a92f8a21a ("Input: apple_z2 - add a driver for Apple Z2 touchscreens") Signed-off-by: Sasha Finkelstein Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2025-12-09T01:52:57+00:00

Prepare input updates for 6.19 merge window.

Input: ti_am335x_tsc - clamp coordinate_readouts to DT maximum (6)

2025-11-18T19:19:38+00:00

DT binding (ti,am3359-tsc.yaml) sets ti,coordinate-readouts to a maximum of 6. The MFD parent also enforces that (readouts * 2 + 2) + adc_channels <= 16 and fails probe if this is violated, so the touchscreen subdriver will not even probe in those cases. Clamp coordinate_readouts > 6 to 6 in the subdriver to align with the binding and keep behavior sane if invalid platform data bypasses schema checks. Keep the existing default to 5 for non-positive values. No functional change with valid DT. Signed-off-by: Junjie Cao Link: https://patch.msgid.link/20251117032358.891822-1-junjie.cao@intel.com Signed-off-by: Dmitry Torokhov

Merge tag 'v6.18-rc6' into for-linus

2025-11-18T07:16:55+00:00

Sync up with the mainline to bring in definition of INPUT_PROP_HAPTIC_TOUCHPAD.

Input: zforce_ts - omit error message when memory allocation fails

2025-10-18T04:43:06+00:00

The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore, remove the useless call to dev_err_probe(), and just return the value instead. Signed-off-by: Xichao Zhao Link: https://patch.msgid.link/20250822034751.244248-3-zhao.xichao@vivo.com Signed-off-by: Dmitry Torokhov

Input: cyttsp5 - use %pe format specifier

2025-10-17T05:01:46+00:00

The %pe format specifier is designed to print error pointers. It prints a symbolic error name (eg. -EINVAL) and it makes the code simpler by omitting PTR_ERR() This patch fixes this cocci report: ./cyttsp5.c:927:3-10: WARNING: Consider using %pe to print PTR_ERR() Signed-off-by: Ricardo Ribalda Link: https://patch.msgid.link/20251013-ptr_err-v1-1-2c5efbd82952@chromium.org Signed-off-by: Dmitry Torokhov

Input: goodix - remove setting of RST pin to input

2025-10-13T16:35:26+00:00

The reset line is being set to input on non-ACPI devices apparently to save power. This isn't being done on ACPI devices as it's been found that some ACPI devices don't have a pull-up resistor fitted. This can also be the case for non-ACPI devices, resulting in: [ 941.672207] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110 [ 942.696168] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110 [ 945.832208] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110 This behaviour appears to have been initialing introduced in ec6e1b4082d9. This doesn't seem to be based on information in either the GT911 or GT9271 datasheets cited as sources of information for this change. Thus it seems likely that it is based on functionality in the Android driver which it also lists. This behaviour may be viable in very specific instances where the hardware is well known, but seems unwise in the upstream kernel where such hardware requirements can't be guaranteed. Remove this over optimisation to improve reliability on non-ACPI devices. Signed-off-by: Martyn Welch Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20251009134138.686215-1-martyn.welch@collabora.com Signed-off-by: Dmitry Torokhov

Input: goodix - add support for ACPI ID GDIX1003

2025-10-13T16:16:11+00:00

Some newer devices use an ACPI hardware ID of GDIX1003 for their Goodix touchscreen controller, instead of GDIX1001 / GDIX1002. Add GDIX1003 to the goodix_acpi_match[] table. Reported-by: Weikang Guo Closes: https://lore.kernel.org/linux-input/20250225024409.1467040-1-guoweikang.kernel@gmail.com/ Tested-by: Weikang Guo Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20251013121022.44333-1-hansg@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2025-10-08T16:44:38+00:00

Pull input updates from Dmitry Torokhov: - Conversions to yaml/json schema and fixes for input-related device tree bindings - New drivers: - Awinic AW86927 haptic chip - Hynitron CST816x series controller - Himax HX852x(ES) touchscreen controller - Fix uinput to not leak kernel memory via a gap in uinput_ff_upload_compat structure - Prevent overflow in pressure calculation in tsc2007 driver causing phantom touches - Make the Atmel maxTouch driver support generic touchscreen configuration (flip, rotate, etc) - Drop support for platform data in tca8418_keypad, pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all now rely on generic device properties for configuration - Other assorted changes and fixes * tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits) Input: atmel_mxt_ts - allow reset GPIO to sleep Input: aw86927 - fix error code in probe() Input: psxpad-spi - add a check for the return value of spi_setup() Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak Input: aw86927 - add driver for Awinic AW86927 dt-bindings: input: Add Awinic AW86927 dt-bindings: touchscreen: remove touchscreen.txt dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node dt-bindings: touchscreen: convert eeti bindings to json schema Input: pm8941-pwrkey - disable wakeup for resin by default dt-bindings: input: pm8941-pwrkey: Document wakeup-source property Input: add driver for Hynitron CST816x series dt-bindings: input: touchscreen: add hynitron cst816x series Input: imx6ul_tsc - set glitch threshold by DTS property dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold dt-bindings: touchscreen: add debounce-delay-us property Input: ps2-gpio - fix typo Input: atmel_mxt_ts - add support for generic touchscreen configurations dt-bindings: input: maxtouch: add common touchscreen properties dt-bindings: touchscreen: convert zet6223 bindings to json schema ...