Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v5.15.7 2021-11-18T18:17:01+00:00 2021-11-18T18:17:01+00:00 John Keeping john@metanate.com 2021-10-06T18:06:03+00:00 urn:sha1:d36d2c35fd98259de4b4f44d877365369eb19534 [ Upstream commit 2667f6b7af99e81958fa97c03bb519fcb09d0055 ] I have a ST1633 touch controller which fails to probe due to a timeout waiting for the controller to become ready. Increasing the minimum delay to 100ms ensures that the probe sequence completes successfully. The ST1633 datasheet says nothing about the maximum delay here and the ST1232 I2C protocol document says "wait until" with no notion of a timeout. Since this only runs once during probe, being generous with the timout seems reasonable and most likely the device will become ready eventually. (It may be worth noting that I saw this issue with a PREEMPT_RT patched kernel which probably has tighter wakeups from usleep_range() than other preemption models.) Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210929152609.2421483-1-john@metanate.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2021-10-18T02:57:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-10-18T02:57:06+00:00 urn:sha1:12dbbfadd8f4e54607463414b06f9416a5c6d981 Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling 2021-10-16T05:11:03+00:00 Oleksij Rempel o.rempel@pengutronix.de 2021-10-16T04:12:06+00:00 urn:sha1:fe0a7e3d012738b0034b3c97ddb0e8bc0a3ff0e6 For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2021-09-11T16:08:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-11T16:08:28+00:00 urn:sha1:765092e4cdaa8439b969952ec4e6de3b84241f90 Pull input updates from Dmitry Torokhov: - several device tree bindings for input devices have been converted to yaml - dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers - analog joystick has been converted to use ktime API and no longer warn about low resolution timers - a few driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: analog - always use ktime functions Input: mms114 - support MMS134S Input: elan_i2c - reduce the resume time for controller in Whitebox Input: edt-ft5x06 - added case for EDT EP0110M09 Input: adc-keys - drop bogus __refdata annotation Input: Fix spelling mistake in Kconfig "useable" -> "usable" Input: Fix spelling mistake in Kconfig "Modul" -> "Module" Input: remove dead CSR Prima2 PWRC driver Input: adp5589-keys - use the right header Input: adp5588-keys - use the right header dt-bindings: input: tsc2005: Convert to YAML schema Input: ep93xx_keypad - prepare clock before using it dt-bindings: input: sun4i-lradc: Add wakeup-source dt-bindings: input: Convert Regulator Haptic binding to a schema dt-bindings: input: Convert Pixcir Touchscreen binding to a schema dt-bindings: input: Convert ChipOne ICN8318 binding to a schema Input: pm8941-pwrkey - fix comma vs semicolon issue dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml dt-bindings: power: reset: Change 'additionalProperties' to true ... 2021-09-07T06:33:26+00:00 Linus Walleij linus.walleij@linaro.org 2021-09-07T06:31:42+00:00 urn:sha1:ab108678195ff70edf50025379a5de94b0bb26be The MMS134S like the MMS136 has an event size of 6 bytes. After this patch, the touchscreen on the Samsung SGH-I407 works fine with PostmarketOS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210706235951.189289-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2021-09-06T02:10:11+00:00 Oliver Graute oliver.graute@kococonnector.com 2021-09-06T02:09:25+00:00 urn:sha1:146ea9b679c9f3e235f20456be477ccd109ac9bd Add Support for EP011M09 Firmware Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210813062110.13950-1-oliver.graute@kococonnector.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2021-09-06T01:58:05+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2021-09-06T01:58:05+00:00 urn:sha1:8be98d2f2a0a262f8bf8a0bc1fdf522b3c7aab17 Prepare input updates for 5.15 merge window. 2021-09-04T06:49:55+00:00 Colin Ian King colin.king@canonical.com 2021-09-04T06:21:37+00:00 urn:sha1:ca595ac271688cc168da722e6f70fcf6ae4266f6 There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210704095702.37567-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2021-07-19T01:56:58+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2021-07-19T01:56:58+00:00 urn:sha1:320424c7d44f54c18df9812fd7c45f6963524002 Sync up with the mainline to get the latest parport API. 2021-07-05T18:42:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-07-05T18:42:45+00:00 urn:sha1:1f89a590b26e34ec7c32fbafaed446e52c3d0c3f Pull input updates from Dmitry Torokhov: - a new driver for SparkFun Qwiic Joystick - pm8941-pwrkey driver now supports PMK8350 - a bunch of assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl Input: hideep - fix the uninitialized use in hideep_nvm_unlock() Input: trackpoint - use kobj_to_dev() Input: atkbd - use kobj_to_dev() Input: tsc200x-core - use kobj_to_dev() Input: ims-pcu - use kobj_to_dev() Input: cros_ec_keyb - use kobj_to_dev() API dt-bindings: input: touchscreen: st1232: Convert to json-schema Input: i8042 - fix typos in comments Input: add SparkFun Qwiic Joystick driver dt-bindings: Add vendor prefix and bindings for Qwiic Joystick Input: cy8ctmg110_ts - switch to using gpiod API Input: cy8ctmg110_ts - switch to using managed resources Input: cy8ctmg110_ts - use endian helpers when converting data on wire Input: cy8ctmg110_ts - let I2C core configure wake interrupt Input: cy8ctmg110_ts - do not hardcode as wakeup source Input: cy8ctmg110_ts - do not hard code interrupt trigger Input: cy8ctmg110_ts - rely on platform code to supply interrupt Input: resistive-adc-touch - fix uninitialized variable 'press' Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheral ...