Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v5.10.7 2020-12-30T10:53:14+00:00 2020-12-30T10:53:14+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2020-11-12T01:17:11+00:00 urn:sha1:d2fd75615c2fc779a20b870e3351d995b2a8adba [ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ] req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-12-30T10:53:14+00:00 Oleksij Rempel o.rempel@pengutronix.de 2020-11-17T23:33:24+00:00 urn:sha1:eced9dfb66913d18df605a7b5cc36bef28f82bb7 [ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ] In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-12-30T10:53:14+00:00 David Jander david@protonic.nl 2020-11-11T19:00:59+00:00 urn:sha1:77b0790ac6bdbd01b022273b070ca20919c571ac [ Upstream commit e52cd628a03f72a547dbf90ccb703ee64800504a ] If touchscreen is released while busy reading HWMON device, the release can be missed. The IRQ thread is not started because no touch is active and BTN_TOUCH release event is never sent. Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon") Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-12-12T17:41:33+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-12T17:41:33+00:00 urn:sha1:643e69aff89a2d0abc53979acc441b68ce86139b Pull input fixes from Dmitry Torokhov: - a fix for cm109 stomping on its own control URB if it tries to toggle buzzer immediately after userspace opens input device (found by syzcaller) - another fix for Raydium touchscreens that do not like splitting command transfers - quirks for i8042, soc_button_array, and goodix drivers to make them work better with certain hardware. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - add upside-down quirk for Teclast X98 Pro tablet Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list Input: raydium_ts_i2c - do not split tx transactions 2020-12-12T00:21:01+00:00 Simon Beginn linux@simonmicro.de 2020-12-12T00:17:32+00:00 urn:sha1:cffdd6d90482316e18d686060a4397902ea04bd2 The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-12-07T06:12:39+00:00 Furquan Shaikh furquan@google.com 2020-12-07T06:05:13+00:00 urn:sha1:3b384bd6c3f2d6d3526c77bfb264dfbaf737bc2a Raydium device does not like splitting of tx transactions into multiple messages - one for the register address and one for the actual data. This results in incorrect behavior on the device side. This change updates raydium_i2c_read and raydium_i2c_write to create i2c_msg arrays separately and passes those arrays into raydium_i2c_xfer which decides based on the address whether the bank switch command should be sent. The bank switch header is still added by raydium_i2c_read and raydium_i2c_write to ensure that all these operations are performed as part of a single I2C transfer. It guarantees that no other transactions are initiated to any other device on the same bus after the bank switch command is sent. Signed-off-by: Furquan Shaikh <furquan@google.com> Link: https://lore.kernel.org/r/20201205005941.1427643-1-furquan@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-12-06T00:16:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-06T00:16:34+00:00 urn:sha1:7059c2c00a2196865c2139083cbef47cd18109b6 Pull input fixes from Dmitry Torokhov: "A fix for 'RETRIGEN' handling in Atmel touch controllers that was causing lost interrupts on systems using edge-triggered interrupts, a quirk for i8042 driver, and a couple more fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - fix lost interrupts Input: xpad - support Ardwiino Controllers Input: i8042 - add ByteSpeed touchpad to noloop table Input: i8042 - fix error return code in i8042_setup_aux() Input: soc_button_array - add missing include 2020-12-01T17:58:43+00:00 Linus Walleij linus.walleij@linaro.org 2020-12-01T17:55:29+00:00 urn:sha1:8c3b55a299c325830a987de21dab6a89ecb71164 After commit 74d905d2d38a devices requiring the workaround for edge triggered interrupts stopped working. The hardware needs the quirk to be used before even proceeding to check if the quirk is needed because mxt_acquire_irq() is called before mxt_check_retrigen() is called and at this point pending IRQs need to be checked, and if the workaround is not active, all interrupts will be lost from this point. Solve this by switching the calls around. Reported-by: Andre Müller <andre.muller@web.de> Tested-by: Andre Müller <andre.muller@web.de> Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Fixes: 74d905d2d38a ("Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201201123026.1416743-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-11-17T20:00:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-11-17T20:00:40+00:00 urn:sha1:0fa8ee0d9ab95c9350b8b84574824d9a384a9f7d Pull input fixes from Dmitry Torokhov: "A fix for use-after-free in the Sun keyboard driver, a fix to firmware updates on newer ICs in the Elan touchpad diver, and a couple misc driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - fix firmware update on newer ICs Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER Input: sunkbd - avoid use-after-free in teardown paths Input: i8042 - allow insmod to succeed on devices without an i8042 controller Input: adxl34x - clean up a data type in adxl34x_probe() 2020-11-12T01:50:12+00:00 Necip Fazil Yildiran fazilyildiran@gmail.com 2020-11-12T01:48:52+00:00 urn:sha1:676650d007e06fddcf3fe38238251d71bd179641 When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y] The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: aa132ffb6b0a ("input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201102221504.541279-1-fazilyildiran@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>