kernel/linux.git/drivers/input/touchscreen, branch v4.19.112

Input: edt-ft5x06 - work around first register access error

2020-02-24T07:34:46+00:00

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ] The EP0700MLP1 returns bogus data on the first register read access (reading the threshold parameter from register 0x00): edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40 It ignores writes until then. This patch adds a dummy read after which the number of sensors and parameter read/writes work correctly. Signed-off-by: Philipp Zabel Signed-off-by: Marco Felsch Tested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register

2020-01-29T15:43:20+00:00

commit 97e24b095348a15ec08c476423c3b3b939186ad7 upstream. The driver misses a check for devm_thermal_zone_of_sensor_register(). Add a check to fix it. Fixes: e28d0c9cd381 ("input: convert sun4i-ts to use devm_thermal_zone_of_sensor_register") Signed-off-by: Chuhong Yuan Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: sur40 - fix interface sanity checks

2020-01-29T15:43:20+00:00

commit 6b32391ed675827f8425a414abbc6fbd54ea54fe upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)") Signed-off-by: Johan Hovold Acked-by: Vladis Dronov Link: https://lore.kernel.org/r/20191210113737.4016-8-johan@kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atmel_mxt_ts - disable IRQ across suspend

2020-01-04T18:12:36+00:00

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ] Across suspend and resume, we are seeing error messages like the following: atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121) This occurs because the driver leaves its IRQ enabled. Upon resume, there is an IRQ pending, but the interrupt is serviced before both the driver and the underlying I2C bus have been resumed. This causes EREMOTEIO errors. Disable the IRQ in suspend, and re-enable it on resume. If there are cases where the driver enters suspend with interrupts disabled, that's a bug we should fix separately. Signed-off-by: Evan Green Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: goodix - add upside-down quirk for Teclast X89 tablet

2019-12-13T07:52:39+00:00

commit df5b5e555b356662a5e4a23c6774fdfce8547d54 upstream. The touchscreen on the Teclast X89 is mounted upside down in relation to the display orientation (the touchscreen itself is mounted upright, but the display is mounted upside-down). Add a quirk for this so that we send coordinates which match the display orientation. Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: cyttsp4_core - fix use after free bug

2019-12-13T07:51:03+00:00

[ Upstream commit 79aae6acbef16f720a7949f8fc6ac69816c79d62 ] The device md->input is used after it is released. Setting the device data to NULL is unnecessary as the device is never used again. Instead, md->input should be assigned NULL to avoid accessing the freed memory accidently. Besides, checking md->si against NULL is superfluous as it points to a variable address, which cannot be NULL. Signed-off-by: Pan Bian Link: https://lore.kernel.org/r/1572936379-6423-1-git-send-email-bianpan2016@163.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: silead - try firmware reload after unsuccessful resume

2019-11-24T07:20:28+00:00

[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ] A certain silead controller (Chip ID: 0x56810000) loses its firmware after suspend, causing the resume to fail. This patch tries to load the firmware, should a resume error occur and retries the resuming. Signed-off-by: Julian Sax Acked-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: st1232 - set INPUT_PROP_DIRECT property

2019-11-24T07:20:28+00:00

[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ] This is how userspace checks for touchscreen devices most reliably. Signed-off-by: Martin Kepplinger Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: usbtouchscreen - initialize PM mutex before using it

2019-08-16T08:12:39+00:00

commit b55d996f057bf2e7ba9422a80b5e17e99860cb0b upstream. Mutexes shall be initialized before they are used. Fixes: 12e510dbc57b2 ("Input: usbtouchscreen - fix deadlock in autosuspend") Reported-by: syzbot+199ea16c7f26418b4365@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: silead - add MSSL0017 to acpi_device_id

2019-06-25T03:35:54+00:00

commit 0e658060e5fc50dc282885dc424a94b5d95547e5 upstream. On Chuwi Hi10 Plus, the Silead device id is MSSL0017. Signed-off-by: Daniel Smith Reviewed-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman