kernel/linux.git/drivers/input/touchscreen, branch v4.14.45

Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro

2018-05-09T07:51:51+00:00

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream. This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click. The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here. Signed-off-by: Vittorio Gambaletta Signed-off-by: Salvatore Bellizzi Tested-by: Guenter Roeck Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: stmfts - set IRQ_NOAUTOEN to the irq flag

2018-04-26T09:02:10+00:00

[ Upstream commit cba04cdf437d745fac85220d1d692a9ae23d7004 ] The interrupt is requested before the device is powered on and it's value in some cases cannot be reliable. It happens on some devices that an interrupt is generated as soon as requested before having the chance to disable the irq. Set the irq flag as IRQ_NOAUTOEN before requesting it. This patch mutes the error: stmfts 2-0049: failed to read events: -11 received sometimes during boot time. Signed-off-by: Andi Shyti Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: goodix - disable IRQs while suspended

2018-04-12T10:32:20+00:00

[ Upstream commit faec44b6838312484d63e82286087cf2d5ebb891 ] We should not try to do any i2c transfers before the controller is resumed (which happens before our resume method gets called). So we need to disable our IRQ while suspended to enforce this. The code paths for devices with GPIOs for the int and reset pins already disable the IRQ the through goodix_free_irq(). This commit also disables the IRQ while suspended for devices without GPIOs for the int and reset pins. This fixes the i2c bus sometimes getting stuck after a suspend/resume causing the touchscreen to sometimes not work after a suspend/resume. This has been tested on a GPD pocked device. BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/ Tested-by: Hans de Goede Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: 88pm860x-ts - fix child-node lookup

2018-01-23T18:58:16+00:00

commit 906bf7daa0618d0ef39f4872ca42218c29a3631f upstream. Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support") Signed-off-by: Johan Hovold Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-11-10T22:14:23+00:00

Pull input layer updates from Dmitry Torokhov: - a new ACPI ID for Elan touchpad found in yet another Ideapad model - Synaptics RMI4 will allow binding to controllers reporting SMB version 3 (note that we are not adding any new ACPI IDs to the Synaptics PS/2 drover so unless user explicitly enables intertouch support there is no user-visible change) - a fixup to TSC 2004/5 touchscreen driver to mark input devices as "direct" to help userspace identify the type of device they are dealing with * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3 Input: tsc200x-core - set INPUT_PROP_DIRECT Input: elan_i2c - add ELAN060C to the ACPI table

Input: tsc200x-core - set INPUT_PROP_DIRECT

2017-11-08T01:44:56+00:00

If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old ways of identifying touchscreen devices. In order to identify a touchscreen device, Android for example, seems to already depend on INPUT_PROP_DIRECT to be present in drivers. udev still checks for either BTN_TOUCH or INPUT_PROP_DIRECT. Checking for BTN_TOUCH however can quite easily lead to false positives; it's a code that not only touchscreen device drivers use. According to the documentation, touchscreen drivers should have this property set and in order to make life easy for userspace, let's set it. Signed-off-by: Martin Kepplinger Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-11-04T01:10:23+00:00

Pull input fixes from Dmitry Torokhov: "Just a couple of fixups to the sparse-keymap module and the Microchip AR1021 touchscreen driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sparse-keymap - send sync event for KE_SW/KE_VSW Input: ar1021_i2c - set INPUT_PROP_DIRECT

Input: ar1021_i2c - set INPUT_PROP_DIRECT

2017-11-03T19:47:33+00:00

If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old ways of identifying touchscreen devices. Let's add it. Signed-off-by: Martin Kepplinger Signed-off-by: Dmitry Torokhov

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-10-22T01:46:39+00:00

Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices