kernel/linux.git/drivers/input/touchscreen, branch v4.14.217

Input: goodix - add upside-down quirk for Teclast X98 Pro tablet

2020-12-29T12:47:04+00:00

[ Upstream commit cffdd6d90482316e18d686060a4397902ea04bd2 ] The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn Signed-off-by: Bastien Nocera Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix unaligned access on 7845

2020-12-29T12:46:54+00:00

[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ] req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix integer overflow on Rt calculation

2020-12-29T12:46:54+00:00

[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ] In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix race that causes missing releases

2020-12-29T12:46:54+00:00

[ Upstream commit e52cd628a03f72a547dbf90ccb703ee64800504a ] If touchscreen is released while busy reading HWMON device, the release can be missed. The IRQ thread is not started because no touch is active and BTN_TOUCH release event is never sent. Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon") Co-developed-by: Oleksij Rempel Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: stmfts - fix a & vs && typo

2020-10-29T08:07:12+00:00

[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ] In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true. Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

2020-10-29T08:07:12+00:00

[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ] If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: usbtouchscreen - add support for BonXeon TP

2020-06-03T06:17:55+00:00

[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ] Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by: James Hilliard Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()

2020-04-02T14:34:33+00:00

[ Upstream commit 32cf3a610c35cb21e3157f4bbf29d89960e30a36 ] These functions are supposed to return negative error codes but instead it returns true on failure and false on success. The error codes are eventually propagated back to user space. Fixes: 48a2b783483b ("Input: add Raydium I2C touchscreen driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200303101306.4potflz7na2nn3od@kili.mountain Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: raydium_i2c_ts - use true and false for boolean values

2020-04-02T14:34:32+00:00

[ Upstream commit 6cad4e269e25dddd7260a53e9d9d90ba3a3cc35a ] Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: edt-ft5x06 - work around first register access error

2020-02-28T15:36:03+00:00

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ] The EP0700MLP1 returns bogus data on the first register read access (reading the threshold parameter from register 0x00): edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40 It ignores writes until then. This patch adds a dummy read after which the number of sensors and parameter read/writes work correctly. Signed-off-by: Philipp Zabel Signed-off-by: Marco Felsch Tested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin