Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=linux-5.9.y 2020-12-08T09:42:04+00:00 2020-12-08T09:42:04+00:00 Linus Walleij linus.walleij@linaro.org 2020-12-01T17:55:29+00:00 urn:sha1:acf7d3a5028f2faaeb7ad44bcc4d93e3967c40c4 commit 8c3b55a299c325830a987de21dab6a89ecb71164 upstream. After commit 74d905d2d38a devices requiring the workaround for edge triggered interrupts stopped working. The hardware needs the quirk to be used before even proceeding to check if the quirk is needed because mxt_acquire_irq() is called before mxt_check_retrigen() is called and at this point pending IRQs need to be checked, and if the workaround is not active, all interrupts will be lost from this point. Solve this by switching the calls around. Reported-by: Andre Müller <andre.muller@web.de> Tested-by: Andre Müller <andre.muller@web.de> Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Fixes: 74d905d2d38a ("Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201201123026.1416743-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2020-11-24T12:38:59+00:00 Necip Fazil Yildiran fazilyildiran@gmail.com 2020-11-12T01:48:52+00:00 urn:sha1:ef96d50bb4ed8c604040dfe610447dff100bfbfd [ Upstream commit 676650d007e06fddcf3fe38238251d71bd179641 ] When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y] The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: aa132ffb6b0a ("input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201102221504.541279-1-fazilyildiran@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-10-29T09:11:58+00:00 YueHaibing yuehaibing@huawei.com 2020-09-16T17:26:09+00:00 urn:sha1:18a1a9c6dd513ca53de191b437636bd447d54449 [ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ] In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true. Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-10-29T09:11:58+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-09-14T17:17:01+00:00 urn:sha1:11f2a1d1911d9923bab3ef546a96932132fb3dfb [ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ] If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-10-29T09:11:58+00:00 Johnny Chuang johnny.chuang.emc@gmail.com 2020-09-16T17:26:57+00:00 urn:sha1:4bb7b5e2606b98168992bc48349d7ff13b392aee [ Upstream commit 93f634069707cfe562c38739f5062feccbe9a834 ] Fixed typo for command from 0xE0 to 0xD0. Fixes: cf520c643012 ("Input: elants_i2c - provide an attribute to show calibration count") Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Link: https://lore.kernel.org/r/1600238783-32303-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-08-23T22:36:59+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2020-08-23T22:36:59+00:00 urn:sha1:df561f6688fef775baa341a0f5d960becd248b11 Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 2020-08-10T23:35:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-08-10T23:35:57+00:00 urn:sha1:4bcf69e57063c9b1b15df1a293c969e80a1c97e6 Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ... 2020-08-07T00:34:19+00:00 Sebastian Reichel sebastian.reichel@collabora.com 2020-08-06T23:08:00+00:00 urn:sha1:d862a3068ea593dc904ef524d8548467755ce36f Expose model and fw_version via sysfs. Also query the model in probe to make sure, that the I2C communication with the device works before successfully probing the driver. This is a bit complicated, since EETI devices do not have a sync interface. Sending the commands and directly reading does not work. Sending the command and waiting for some time is also not an option, since there might be touch events in the mean time. Last but not least we do not cache the results, since this interface can be used to check the I2C communication is still working as expected. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-08-07T00:34:18+00:00 Sebastian Reichel sebastian.reichel@collabora.com 2020-08-06T23:06:36+00:00 urn:sha1:27aced19e098ba00e87a09d6ba6d4518e89319c3 Add basic support for an optional reset gpio. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200805160520.456570-4-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2020-08-07T00:34:17+00:00 Sebastian Reichel sebastian.reichel@collabora.com 2020-08-06T23:00:43+00:00 urn:sha1:3bdd21c6937a07f2877409bcdafc0ae2265fc981 This adds support for EXC80H60 and EXCH84 controllers, which use a different event type id and have two extra bits for the resolution (so the maximum is 16K instead of 4K). Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200805160520.456570-3-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>