kernel/linux.git/drivers/input/touchscreen/zforce_ts.c, branch v6.6.132

Input: Switch i2c drivers back to use .probe()

2023-05-17T16:59:11+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230517164645.162294-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: zforce_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2023-01-10T04:25:28+00:00

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230102181842.718010-68-jic23@kernel.org Signed-off-by: Dmitry Torokhov

Input: zforce_ts - Convert to i2c's .probe_new()

2022-12-02T22:53:47+00:00

The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20221118224540.619276-268-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov

Input: use input_device_enabled()

2020-12-03T06:10:33+00:00

Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman

Input: zforce_ts - fix dual touch recognition

2016-04-25T21:27:56+00:00

A wrong decoding of the touch coordinate message causes a wrong touch ID. Touch ID for dual touch must be 0 or 1. According to the actual Neonode nine byte touch coordinate coding, the state is transported in the lower nibble and the touch ID in the higher nibble of payload byte five. Signed-off-by: Knut Wohlrab Signed-off-by: Oleksij Rempel Signed-off-by: Dirk Behme Signed-off-by: Dmitry Torokhov

Input: zforce - simplify function return logic

2015-10-02T18:44:17+00:00

The invoked function already returns zero on success or a negative errno code so there is no need to open code the logic in the caller. This also fixes the following make coccicheck warning: end returns can be simplified and declaration on line 602 can be dropped Signed-off-by: Javier Martinez Canillas Reviewed-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov

Input: zforce - make the interrupt GPIO optional

2015-08-03T21:10:10+00:00

Add support for hardware which uses an I2C Serializer / Deserializer (SerDes) to communicate with the zFroce touch driver. In this case the SerDes will be configured as an interrupt controller and the zForce driver will have no access to poll the GPIO line. To support this, we add two dedicated new GPIOs in the device tree: reset-gpios and irq-gpios, with the irq-gpios being optional. To not break the existing device trees, the index based 'gpios' entries are still supported, but marked as deprecated. With this, if the interrupt GPIO is available, either via the old or new device tree style, the while loop will read and handle the packets as long as the GPIO indicates that the interrupt is asserted (existing, unchanged driver behavior). If the interrupt GPIO isn't available, i.e. not configured via the new device tree style, we are falling back to one read per ISR invocation (new behavior to support the SerDes). Note that the gpiod functions help to handle the optional GPIO: devm_gpiod_get_index_optional() will return NULL in case the interrupt GPIO isn't available. And gpiod_get_value_cansleep() does cover this, too, by returning 0 in this case. Signed-off-by: Dirk Behme Reviewed-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov

Input: zforce - don't invert the interrupt GPIO

2015-07-20T16:57:19+00:00

Commit 2d53809594af ("Input: zforce_ts - convert to use the gpiod interface") converted this driver to use the gpiod functions. These functions take the active low property into account, so we don't have to invert the result of gpiod_get_value_cansleep(). This has been missed in that commit. Fix it. Signed-off-by: Dirk Behme Signed-off-by: Dmitry Torokhov

Input: drop owner assignment from i2c_driver

2015-07-17T23:57:00+00:00

i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Dmitry Torokhov