kernel/linux.git/drivers/input/touchscreen/silead.c, branch v6.19.11

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Input: silead - Always support 10 fingers

2024-06-03T09:10:08+00:00

When support for Silead touchscreens was orginal added some touchscreens with older firmware versions only supported 5 fingers and this was made the default requiring the setting of a "silead,max-fingers=10" uint32 device-property for all touchscreen models which do support 10 fingers. There are very few models with the old 5 finger fw, so in practice the setting of the "silead,max-fingers=10" is boilerplate which needs to be copy and pasted to every touchscreen config. Reporting that 10 fingers are supported on devices which only support 5 fingers doesn't cause any problems for userspace in practice, since at max 4 finger gestures are supported anyways. Drop the max_fingers configuration and simply always assume 10 fingers. Signed-off-by: Hans de Goede Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com

Input: drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-05-13T22:43:19+00:00

These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240509174158.2211071-2-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: silead - simplify with dev_err_probe()

2023-07-07T23:54:29+00:00

Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230625162817.100397-19-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov

Input: Switch i2c drivers back to use .probe()

2023-05-17T16:59:11+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230517164645.162294-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: silead - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2023-01-10T04:25:27+00:00

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron Cc: Hans de Goede Reviewed-by: Hans de Goede Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230102181842.718010-60-jic23@kernel.org Signed-off-by: Dmitry Torokhov

Input: silead - Convert to i2c's .probe_new()

2022-12-02T22:53:46+00:00

.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20221118224540.619276-258-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov

Input: silead - add pen support

2021-12-13T05:10:23+00:00

Some Silead touchscreens have support for an active (battery powered) pen, add support for this. So far pen-support has only been seen on X86/ACPI (non devicetree) devs, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new properties are deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20211122220637.11386-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: silead - add support for EFI-embedded fw using different min/max coordinates

2021-12-13T05:10:21+00:00

Unfortunately, at the time of writing this commit message, we have been unable to get permission from Silead, or from device OEMs, to distribute the necessary Silead firmware files in linux-firmware. On a whole bunch of devices the UEFI BIOS code contains a touchscreen driver, which contains an embedded copy of the firmware. The fw-loader code has a "platform" fallback mechanism, which together with info on the firmware from drivers/platform/x86/touchscreen_dmi.c will use the firmware from the UEFI driver when the firmware is missing from /lib/firmware. This makes the touchscreen work OOTB without users needing to manually download the firmware. The firmware bundled with the original Windows/Android is usually newer then the firmware in the UEFI driver and it is better calibrated. This better calibration can lead to significant differences in the reported min/max coordinates. Add support for a new (optional) "silead,efi-fw-min-max" property which provides a set of alternative min/max values to use for the x/y axis when the EFI embedded firmware is used. The new property is only used on (x86) devices which do not use devicetree, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing silead devicetree-bindings documentation. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20211122220637.11386-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state

2021-04-10T05:42:20+00:00

Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov