kernel/linux.git/drivers/input/touchscreen/mms114.c, branch v6.1.168

Input: mms114 - support MMS134S

2021-09-07T06:33:26+00:00

The MMS134S like the MMS136 has an event size of 6 bytes. After this patch, the touchscreen on the Samsung SGH-I407 works fine with PostmarketOS. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210706235951.189289-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov

Input: mms114 - support MMS136

2021-04-10T06:23:01+00:00

The Melfas MMS136 is similar to the other MMS variants but has event packages of 6 bytes rather than 8 as the others. The define is named FINGER_EVENT_SZ in the vendor drivers so I renamed it from MMS*_PACKET_SZ to MMS*_EVENT_SZ. After this patch, the touchscreen on the Samsung GT-I8530 works fine with PostmarketOS. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210404232619.3092682-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov

Input: move to use request_irq by IRQF_NO_AUTOEN flag

2021-03-25T22:27:56+00:00

disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov

Input: use input_device_enabled()

2020-12-03T06:10:33+00:00

Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' into next

2020-05-18T04:10:28+00:00

Merge for-linus branch to sync Elan touchscreen driver code.

Input: introduce input_mt_report_slot_inactive()

2020-05-12T20:18:26+00:00

input_mt_report_slot_state() ignores "tool" argument when the slot is closed, which has caused a bit of confusion. Let's introduce input_mt_report_slot_inactive() to report inactive slot state. Suggested-by: Dmitry Torokhov Signed-off-by: Jiada Wang Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.com Signed-off-by: Dmitry Torokhov

Input: mms114 - add extra compatible for mms345l

2020-04-25T20:09:55+00:00

MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152. However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization. TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06 On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now. But we probably shouldn't print something from a random register. Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future. Signed-off-by: Stephan Gerhold Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov

Input: mms114 - fix handling of mms345l

2020-04-15T04:28:35+00:00

MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Reviewed-by: Andi Shyti Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov

Input: mms114 - use device_get_match_data

2019-11-12T00:25:05+00:00

device_get_match_data is available now, so we can replace the call to of_device_get_match_data and remove the FIXME comment. Signed-off-by: Stephan Gerhold Reviewed-by: Andi Shyti Link: https://lore.kernel.org/r/20191007203343.101466-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov

Input: mms114 - add SPDX identifier

2018-02-03T00:04:10+00:00

Replace the original license statement with the SPDX identifier. Add also one line of description as recommended by the COPYING file. Signed-off-by: Andi Shyti Signed-off-by: Dmitry Torokhov