kernel/linux.git/drivers/input/touchscreen/goodix.c, branch v6.12.80

Input: goodix - add support for ACPI ID GDIX1003

2025-12-01T10:43:23+00:00

commit c6d99e488117201c63efd747ce17b80687c3f5a9 upstream. Some newer devices use an ACPI hardware ID of GDIX1003 for their Goodix touchscreen controller, instead of GDIX1001 / GDIX1002. Add GDIX1003 to the goodix_acpi_match[] table. Reported-by: Weikang Guo Closes: https://lore.kernel.org/linux-input/20250225024409.1467040-1-guoweikang.kernel@gmail.com/ Tested-by: Weikang Guo Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20251013121022.44333-1-hansg@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

Merge branch 'next' into for-linus

2024-05-23T00:39:34+00:00

Prepare input updates for 6.10 merge window.

Input: drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-05-13T22:43:19+00:00

These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240509174158.2211071-2-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

2024-01-19T08:44:54+00:00

Some devices list 3 Gpio resources in the ACPI resource list for the touchscreen: 1. GpioInt resource pointing to the GPIO used for the interrupt 2. GpioIo resource pointing to the reset GPIO 3. GpioIo resource pointing to the GPIO used for the interrupt Note how the third extra GpioIo resource really is a duplicate of the GpioInt provided info. Ignore this extra GPIO, treating this setup the same as gpio_count == 2 && gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook Colossus W803 rugged tablet and likely also on the CyberBook_T116K. Reported-by: Maarten van der Schrieck Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22 Suggested-by: Maarten van der Schrieck Tested-by: Maarten van der Schrieck Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case

2023-10-04T14:21:45+00:00

Add a special case for gpio_count == 1 && gpio_int_idx == 0 to goodix_add_acpi_gpio_mappings(). It seems that on newer x86/ACPI devices the reset and irq GPIOs are no longer listed as GPIO resources instead there is only 1 GpioInt resource and _PS0 does the whole reset sequence for us. This means that we must call acpi_device_fix_up_power() on these devices to ensure that the chip is reset before we try to use it. This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call acpi_device_fix_up_power() in some cases") by adding a call to acpi_device_fix_up_power() to the generic "Unexpected ACPI resources" catch all. But it turns out that this case on some hw needs some more special handling. Specifically the firmware may bootup with the IRQ pin in output mode. The reset sequence from ACPI _PS0 (executed by acpi_device_fix_up_power()) should put the pin in input mode, but the GPIO subsystem has cached the direction at bootup, causing request_irq() to fail due to gpiochip_lock_as_irq() failure: [ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0 [ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060 [ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8 [ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ [ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio [ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5 Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0 which adds an ACPI GPIO lookup table for the int GPIO even though we cannot use it for reset purposes (as there is no reset GPIO). Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, which will explicitly set the direction to input fixing the issue. Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since there is only 1 GPIO in the ACPI resources the reset entry in that lookup table will amount to a no-op. Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com> Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2023-08-30T23:06:38+00:00

Prepare input updates for 6.6 merge window.

Input: goodix - add support for ACPI ID GDX9110

2023-08-15T18:38:50+00:00

The Goodix touchscreen controller with ACPI ID GDX9110 was not recognized by the goodix driver. This patch adds this ID to the list of supported IDs, allowing the driver to be used with this device. The change will allow Linux to be used on ~1 million tablet devices used in Kenyan primary schools. Signed-off-by: Felix Engelhardt Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20230807124723.382899-1-felix.engelhardt@eidu.com Signed-off-by: Dmitry Torokhov

Merge tag 'v6.4' into next

2023-07-17T16:20:46+00:00

Sync up with mainline to bring in updates to shared infrastructure.

Input: goodix - simplify with dev_err_probe()

2023-07-07T23:54:29+00:00

Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230625162817.100397-14-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov