kernel/linux.git/drivers/input/touchscreen/goodix.c, branch v6.1.45

Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table

2023-04-06T10:10:50+00:00

commit 8a0432bab6ea3203d220785da7ab3c7677f70ecb upstream. The Android Lenovo Yoga Book X90F / X90L uses the same goodix touchscreen with 9 bytes touch reports for its touch keyboard as the already supported Windows Lenovo Yoga Book X91F/L, add a DMI match for this to the nine_bytes_report DMI table. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20230315134442.71787-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: goodix - try resetting the controller when no config is set

2022-11-03T19:49:35+00:00

On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver does not reset the controller at probe time, because sometimes the system firmware loads a config and resetting might loose this config. On the Nanote UMPC-01 device OTOH the config is in flash of the controller, the controller needs a reset to load this; and the system firmware does not reset the controller on a cold boot. To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try resetting the controller and then re-reading the config when encountering a config with 0 width/height/max_touch_num value and the controller has not already been reset by goodix_ts_probe(). This should be safe to do in general because normally we should never encounter a config with 0 width/height/max_touch_num. Doing this in general not only avoids the need for a DMI quirk, but also might help other systems. Signed-off-by: Hans de Goede Reviewed-by: Bastien Nocera Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2022-10-10T05:30:23+00:00

Prepare input updates for 6.1 merge window.

Input: goodix - add compatible string for GT1158

2022-08-23T17:23:37+00:00

Add compatible string for GT1158 missing from the previous patch. Fixes: 425fe4709c76 ("Input: goodix - add support for GT1158") Signed-off-by: Jarrah Gosbell Link: https://lore.kernel.org/r/20220813043821.9981-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

Input: goodix - add support for GT1158

2022-08-11T23:18:20+00:00

This controller is used by PinePhone and PinePhone Pro. Support for the PinePhone Pro will be added in a later patch set. Signed-off-by: Ondrej Jirman Signed-off-by: Jarrah Gosbell Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20220809091200.290492-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2022-08-02T17:06:12+00:00

Prepare input updates for 5.20 (or 6.0) merge window.

Input: goodix - call acpi_device_fix_up_power() in some cases

2022-07-09T04:54:17+00:00

On ACPI boards, when we cannot get the GPIOs to do a reset ourselves if necessary, call acpi_device_fix_up_power() to force the ACPI _PS0 method to run. On some devices without proper GPIO descriptions this will reset the touchscreen for us and this may be necessary for us to be able to communicate to the touchscreen at all. Specifically on an Aya Neo Next this change will cause the _PS0() ACPI function to call INIT() which does: Method (INIT, 0, Serialized) { TP_I = 0x00A50000 TP_R = 0x00A50000 Sleep (0x0A) TP_I = 0x00E50000 Sleep (One) TP_R = 0x00E50000 Sleep (0x06) TP_I = 0x00A50000 Sleep (0x3C) TP_I = 0x00041800 } On older kernels the ACPI core assumed a power-on was necessary by itself and would run _PS0 before our probe function runs, which can be seen from the GPIO pin ctrl registers in /sys/kernel/debug/gpio which match the above hex values with older kernels. With newer kernels before this change the GPIO pin ctrl registers do not match, indicating INIT() has not run and probing the touchscreen fails. This change makes Linux run _PS0() again fixing the touchscreen not working on the Aya Neo Next. Reported-and-tested-by: Maya Matuszczyk Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220618210233.208027-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov

Input: goodix - switch use of acpi_gpio_get_*_resource() APIs

2022-07-06T23:29:50+00:00

No need to open code functionality that is provided by the acpi_gpio_get_irq_resource() and acpi_gpio_get_io_resource(). Signed-off-by: Andy Shevchenko Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20220705180252.963-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov

Merge tag 'v5.17-rc8' into next

2022-03-15T02:14:29+00:00

Sync up with mainline to again get the latest changes in HID subsystem.