kernel/linux.git/drivers/input/touchscreen/edt-ft5x06.c, branch v6.3

Input: edt-ft5x06 - fix typo in a comment

2023-01-30T04:37:01+00:00

Replace 'firmares' with 'firmwares'. Signed-off-by: Dario Binacchi Link: https://lore.kernel.org/r/20230128162325.64467-1-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov

Input: edt-ft5x06 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2023-01-10T04:25:25+00:00

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron Cc: Michael Trimarchi Cc: Dario Binacchi Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230102181842.718010-42-jic23@kernel.org Signed-off-by: Dmitry Torokhov

Input: edt-ft5x06 - Convert to i2c's .probe_new()

2022-12-02T22:53:45+00:00

.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König Acked-by: Oliver Graute Link: https://lore.kernel.org/r/20221118224540.619276-238-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov

Input: move from strlcpy with unused retval to strscpy

2022-08-18T22:44:08+00:00

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

Input: edt-ft5x06 - show crc and header errors by sysfs

2022-06-29T05:00:18+00:00

M06 sends packets with header and crc for data verification. Now you can check at runtime how many packets have been dropped. Co-developed-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Link: https://lore.kernel.org/r/20220621123937.1330389-7-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov

Input: edt-ft5x06 - show firmware version by sysfs

2022-06-29T05:00:17+00:00

The firmware version was printed only if debug mode was enabled. Now you can always get it from sysfs. Co-developed-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Acked-by: Oliver Graute Link: https://lore.kernel.org/r/20220621123937.1330389-6-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov

Input: edt-ft5x06 - show model name by sysfs

2022-06-29T05:00:01+00:00

The model name was printed only if debug mode was enabled. Now you can always get it from sysfs. Co-developed-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Acked-by: Oliver Graute Link: https://lore.kernel.org/r/20220621123937.1330389-5-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov

Input: edt-ft5x06 - set report rate by dts property

2022-06-29T05:00:00+00:00

It allows to change the M06/M12 default scan rate on driver probing. Co-developed-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Link: https://lore.kernel.org/r/20220621123937.1330389-4-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov

Input: edt-ft5x06 - get/set M12 report rate by sysfs

2022-06-29T04:59:58+00:00

Add support for reading/writing scan rate (SC) register for M12 by sysfs. The register value is equal to the SC (Hz), unlike M06, where instead it is equal to SC / 10. Co-developed-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Tested-by: Dario Binacchi Signed-off-by: Dario Binacchi Link: https://lore.kernel.org/r/20220621123937.1330389-3-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov