kernel/linux.git/drivers/input/touchscreen/atmel_mxt_ts.c, branch v6.3

Input: atmel_mxt_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2023-01-10T04:25:24+00:00

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Reviewed-by: Claudiu Beznea Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230102181842.718010-34-jic23@kernel.org Signed-off-by: Dmitry Torokhov

Input: atmel_mxt_ts - Convert to i2c's .probe_new()

2022-12-02T22:53:44+00:00

The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20221118224540.619276-228-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov

Input: move from strlcpy with unused retval to strscpy

2022-08-18T22:44:08+00:00

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20220818210022.6865-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin Reviewed-by: Jeremy Kerr Reviewed-by: Benjamin Mugnier Reviewed-by: Javier Martinez Canillas Reviewed-by: Crt Mori Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Marek Behún # for leds-turris-omnia Acked-by: Andy Shevchenko Reviewed-by: Petr Machata # for mlxsw Reviewed-by: Maximilian Luz # for surface3_power Acked-by: Srinivas Pandruvada # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil # for media/* + staging/media/* Acked-by: Miguel Ojeda # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli # for versaclock5 Reviewed-by: Ajay Gupta # for ucsi_ccg Acked-by: Jonathan Cameron # for iio Acked-by: Peter Rosin # for i2c-mux-*, max9860 Acked-by: Adrien Grassein # for lontium-lt8912b Reviewed-by: Jean Delvare # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard # for IPMI Reviewed-by: Vladimir Oltean Acked-by: Dmitry Torokhov Acked-by: Sebastian Reichel # for drivers/power Acked-by: Krzysztof Hałasa Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

Input: atmel_mxt_ts - fix double free in mxt_read_info_block

2021-12-13T05:08:59+00:00

The "id_buf" buffer is stored in "data->raw_info_block" and freed by "mxt_free_object_table" in case of error. Return instead of jumping to avoid a double free. Addresses-Coverity-ID: 1474582 ("Double free") Fixes: 068bdb67ef74 ("Input: atmel_mxt_ts - fix the firmware update") Signed-off-by: José Expósito Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: move to use request_irq by IRQF_NO_AUTOEN flag

2021-03-25T22:27:56+00:00

disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov

Input: atmel_mxt_ts - support wakeup methods

2021-03-21T02:48:39+00:00

According to datasheets, chips like mXT1386 have a WAKE line, it is used to wake the chip up from deep sleep mode before communicating with it via the I2C-compatible interface. If the WAKE line is connected to a GPIO line, the line must be asserted 25 ms before the host attempts to communicate with the controller. If the WAKE line is connected to the SCL pin, the controller will send a NACK on the first attempt to address it, the host must then retry 25 ms later. Implement the wake-up methods in the driver. Touchscreen now works properly on devices like Acer A500 tablet, fixing problems like this: atmel_mxt_ts 0-004c: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121) atmel_mxt_ts 0-004c: Trying alternate bootloader address atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121) atmel_mxt_ts: probe of 0-004c failed with error -121 Reviewed-by: Linus Walleij Signed-off-by: Jiada Wang Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20210302102158.10533-3-digetx@gmail.com Signed-off-by: Dmitry Torokhov

Merge branch 'next' into for-linus

2020-12-15T00:27:23+00:00

Prepare input updates for 5.11 merge window.

Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd()

2020-12-11T07:39:18+00:00

Simplify the return expression. Signed-off-by: Zheng Yongjun Link: https://lore.kernel.org/r/20201210135943.1612-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov

Input: use input_device_enabled()

2020-12-03T06:10:33+00:00

Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov