kernel/linux.git/drivers/input/touchscreen/ads7846.c, branch v6.3

Input: ads7846 - don't check penirq immediately for 7845

2023-01-30T02:33:45+00:00

To discard false readings, one should use "ti,penirq-recheck-delay-usecs". Checking get_pendown_state() at the beginning, most of the time fails causing malfunctioning. Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230126105227.47648-4-l.ellero@asem.it Signed-off-by: Dmitry Torokhov

Input: ads7846 - always set last command to PWRDOWN

2023-01-30T02:33:45+00:00

Controllers that report pressure (e.g. ADS7846) use 5 commands and the correct sequence is READ_X, READ_Y, READ_Z1, READ_Z2, PWRDOWN. Controllers that don't report pressure (e.g. ADS7845/ADS7843) use only 3 commands and the correct sequence should be READ_X, READ_Y, PWRDOWN. But the sequence sent was incorrect: READ_X, READ_Y, READ_Z1. Fix this by setting the third (and last) command to PWRDOWN. Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230126105227.47648-3-l.ellero@asem.it Signed-off-by: Dmitry Torokhov

Input: ads7846 - don't report pressure for ads7845

2023-01-30T02:33:45+00:00

ADS7845 doesn't support pressure. Avoid the following error reported by libinput-list-devices: "ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE". Fixes: ffa458c1bd9b ("spi: ads7846 driver") Signed-off-by: Luca Ellero Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230126105227.47648-2-l.ellero@asem.it Signed-off-by: Dmitry Torokhov

Input: ads7846 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

2023-01-10T04:25:24+00:00

SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protection against unused function warnings. The new combination of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions, thus suppressing the warning, but still allowing the unused code to be removed. Thus also drop the __maybe_unused markings. Signed-off-by: Jonathan Cameron Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230102181842.718010-32-jic23@kernel.org Signed-off-by: Dmitry Torokhov

spi: make remove callback a void function

2022-02-09T13:00:45+00:00

The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König Acked-by: Marc Kleine-Budde Acked-by: Andy Shevchenko Reviewed-by: Geert Uytterhoeven Acked-by: Jérôme Pouiller Acked-by: Miquel Raynal Acked-by: Jonathan Cameron Acked-by: Claudius Heine Acked-by: Stefan Schmidt Acked-by: Alexandre Belloni Acked-by: Ulf Hansson # For MMC Acked-by: Marcus Folkesson Acked-by: Łukasz Stelmach Acked-by: Lee Jones Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown

Input: ads7846 - do not attempt IRQ workaround when deferring probe

2021-10-16T05:09:48+00:00

When request_irq() returns -EPORBE_DEFER we should abort probe and try again later instead of trying to engage IRQ trigger workaround. Link: https://lore.kernel.org/r/20210910045039.4020199-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: ads7846 - use input_set_capability()

2021-10-16T05:09:48+00:00

Instead of manipulating capability bits directly use input_set_capability(). Also stop setting EV_ABS explicitly as input_set_abs_params() does it for us. Link: https://lore.kernel.org/r/20210910045039.4020199-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: ads7846 - set input device bus type and product ID

2021-10-16T05:09:48+00:00

Set input device's bus type as BUS_SPI and use model as product ID. Link: https://lore.kernel.org/r/20210910045039.4020199-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: ads7846 - switch to devm initialization

2021-09-10T04:30:02+00:00

This simplies the code a lot and fixes some potential resource leaks in the error return paths. Signed-off-by: Daniel Mack Link: https://lore.kernel.org/r/20210907200726.2034962-4-daniel@zonque.org Signed-off-by: Dmitry Torokhov

Input: ads7846 - remove custom filter handling functions from pdata

2021-09-10T04:30:01+00:00

The functions in the platform data struct to initialize, cleanup and apply custom filters are not in use by any mainline board. Remove support for them to pave the road for more cleanups to come. The enum was moved as it has no users outside of the driver code itself. Signed-off-by: Daniel Mack Reviewed-by: Marco Felsch Link: https://lore.kernel.org/r/20210907200726.2034962-3-daniel@zonque.org Signed-off-by: Dmitry Torokhov