kernel/linux.git/drivers/input/touchscreen/ads7846.c, branch v5.4.228

Input: ads7846 - fix unaligned access on 7845

2020-12-30T10:51:09+00:00

[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ] req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix integer overflow on Rt calculation

2020-12-30T10:51:09+00:00

[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ] In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - fix race that causes missing releases

2020-12-30T10:51:09+00:00

[ Upstream commit e52cd628a03f72a547dbf90ccb703ee64800504a ] If touchscreen is released while busy reading HWMON device, the release can be missed. The IRQ thread is not started because no touch is active and BTN_TOUCH release event is never sent. Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon") Co-developed-by: Oleksij Rempel Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: ads7846 - add support for general touchscreen bindings

2019-08-09T14:44:11+00:00

A few vendor specific bindings are now covered by common bindings. Let the driver parse the common bindings to make use of common inverting and swapping mechnism. Aslo make use of touchscreen_report_pos() to ensure the correct inverting-swapping order. The vendor specific properties are used as default (backward compatibility) and gets overwritten by common bindings. Signed-off-by: Marco Felsch Reviewed-by: Rob Herring Signed-off-by: Dmitry Torokhov

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

Input: ads7846 - constify attribute_group structures

2017-07-12T21:19:31+00:00

attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9086 624 0 9710 25ee drivers/input/touchscreen/ads7846.o File size After adding 'const': text data bss dec hex filename 9198 496 0 9694 25de drivers/input/touchscreen/ads7846.o Signed-off-by: Arvind Yadav Signed-off-by: Dmitry Torokhov

Input: ads7846 - avoid pen up/down when reading hwmon

2017-03-25T17:38:43+00:00

Each time the HWMON devices are read (e.g. battery voltage) while the touchscreen is held pressed, extra pen-up and pen-down events are generated. This is fixed by avoiding the UP event when the touchscreen is stopped. Signed-off-by: David Jander Signed-off-by: Dmitry Torokhov

Input: touchscreen - drop unnecessary calls to device_init_wakeup

2017-01-22T07:53:30+00:00

Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck Signed-off-by: Dmitry Torokhov

Input: ads7846 - remove redundant regulator_disable call

2016-08-22T21:15:11+00:00

ADS7846 regulator is disabled twice in a row in ads7846_remove(). Valid one is in ads7846_disable(). Removing the ads7846 module causes warning about unbalanced disables. ... WARNING: CPU: 0 PID: 29269 at drivers/regulator/core.c:2251 _regulator_disable+0xf8/0x130 unbalanced disables for vads7846 CPU: 0 PID: 29269 Comm: rmmod Tainted: G D W 4.7.0+ #3 Hardware name: HTC Magician ... show_stack+0x10/0x14 __warn+0xd8/0x100 warn_slowpath_fmt+0x38/0x48 _regulator_disable+0xf8/0x130 regulator_disable+0x34/0x60 ads7846_remove+0x58/0xd4 [ads7846] spi_drv_remove+0x1c/0x34 __device_release_driver+0x84/0x114 driver_detach+0x8c/0x90 bus_remove_driver+0x5c/0xc8 SyS_delete_module+0x1a0/0x238 ret_fast_syscall+0x0/0x38 Signed-off-by: Petr Cvek Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-11-06T19:57:41+00:00

Pull input updates from Dmitry Torokhov: "Items of note: - evdev users can now limit or mask the kind of events they will receive. This will allow applications such as power manager or network manager to only be woken when user presses special keys such as KEY_POWER or KEY_WIFI and not be bothered with ordinary key presses coming from keyboard - support for FocalTech FT6236 touchscreen controller - support for ROHM BU21023/24 touchscreen controller - edt-ft5x06 touchscreen driver got a face lift and can now be used with FT5506 - support for Google Fiber TV Box remote controls - improvements in xpad driver (with more to come) - several parport-based drivers have been switched to the new device model - other miscellaneous driver improvements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits) HID: hid-gfrm: avoid warning for input_configured API change HID: hid-input: allow input_configured callback return errors Input: evdev - fix bug in checking duplicate clock change request Input: add userio module Input: evdev - add event-mask API Input: snvs_pwrkey - remove duplicated semicolon HID: hid-gfrm: Google Fiber TV Box remote controls Input: e3x0-button - update Kconfig description Input: tegra-kbc - drop use of IRQF_NO_SUSPEND flag Input: tegra-kbc - enable support for the standard "wakeup-source" property Input: xen - check return value of xenbus_printf Input: hp_sdc_rtc - fix y2038 problem in proc_show Input: nomadik-ske-keypad - fix a trivial typo Input: xpad - fix clash of presence handling with LED setting Input: edt-ft5x06 - work around FT5506 firmware bug Input: edt-ft5x06 - add support for FT5506 Input: edt-ft5x06 - add support for different max support points Input: edt-ft5x06 - use max support points to determine how much to read Input: rotary-encoder - add support for quarter-period mode Input: rotary-encoder - use of_property_read_bool ...