kernel/linux.git/drivers/input/touchscreen/ads7846.c, branch v5.15.7

Merge tag 'v5.11' into next

2021-02-23T05:21:03+00:00

Merge with mainline to get latest APIs and device tree bindings.

Input: ads7846 - convert to one message

2021-01-21T07:21:54+00:00

Convert multiple full duplex transfers in to a single transfer to reduce CPU load. Current driver version support following filtering modes: - ads7846_no_filter() - not filtered - ads7846_debounce_filter() - driver specific debounce filter - pdata->filter - platform specific debounce filter (do any platform provides such filter?) Without filter this HW is not really usable, since the physic of resistive touchscreen can provide some bounce effects. With driver internal filter, we have constant amount of retries + debounce retries if some anomaly was detected. High amount of tiny SPI transfers is the primer reason of high CPU load and interrupt frequency. This patch create one SPI transfer with all fields and not optional retires. If bounce anomaly was detected, we will make more transfer if needed. Without this patch, we will get about 10% CPU load on iMX6S on pen-down event. For example by holding stylus on the screen. With this patch, depending in the amount of retries, the CPU load will be 1% with "ti,debounce-rep = <3>". One buffer transfer allows us to use PIO FIFO or DMA engine, depending on the platform. Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201110085041.16303-3-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-12-16T00:18:23+00:00

Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...

Input: ads7846 - drop unneeded asm/irq.h include

2020-11-18T00:28:18+00:00

This is essentially a revert of: 3ac8bf077d0f ("[PATCH] ads7846: sparc32 warning fix") By now enable_irq() and disable_irq() are properly defined in linux/interrupt.h and we do not need to pull in architecture-specific bits. Signed-off-by: Dmitry Torokhov

Input: ads7846 - fix unaligned access on 7845

2020-11-18T00:28:17+00:00

req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov

Input: ads7846 - fix integer overflow on Rt calculation

2020-11-18T00:28:16+00:00

In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: ads7846 - convert to full duplex

2020-11-18T00:28:14+00:00

Starting with 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support"), the ads7845 was partially converted to full duplex mode. Since it is not touchscreen controller specific, it is better to extend this conversion to cover entire driver. This will reduce CPU load and make driver more readable. Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201110085041.16303-2-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: ads7846 - fix race that causes missing releases

2020-11-18T00:28:12+00:00

If touchscreen is released while busy reading HWMON device, the release can be missed. The IRQ thread is not started because no touch is active and BTN_TOUCH release event is never sent. Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon") Co-developed-by: Oleksij Rempel Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov

Input: ads7846: do not overwrite spi->mode flags set by spi framework

2020-11-12T18:45:08+00:00

Do not overwrite spi->mode flags set by spi framework, otherwise the chip select polarity will get lost. Signed-off-by: Oleksij Rempel Acked-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20201027095724.18654-3-o.rempel@pengutronix.de Signed-off-by: Mark Brown

Input: ads7846 - use kobj_to_dev() API

2020-11-09T05:53:18+00:00

Use kobj_to_dev() instead of container_of(). Signed-off-by: Wang Qing Link: https://lore.kernel.org/r/1604893436-20206-1-git-send-email-wangqing@vivo.com Signed-off-by: Dmitry Torokhov