kernel/linux.git/drivers/input/touchscreen/Kconfig, branch v4.18.2

Merge tag 'v4.17-rc6' into next

2018-05-24T16:30:15+00:00

Sync up with mainline to bring in Atmel controller changes for Caroline.

Input: add support for ChipOne icn8505 based touchscreens

2018-05-09T20:29:35+00:00

The ChipOne icn8505 is an i2c capacitive touchscreen controller typically used in cheap x86 tablets, this commit adds a driver for it. Note the icn8505 is somewhat similar to the icn8318 and I started with modifying that driver to support both, but in the end the differences were too large and I decided to write a new driver instead. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov

Input: hideep_ts - fix a typo in Kconfig

2018-04-23T23:38:16+00:00

This patch fixes a spelling error found in Kconfig. Signed-off-by: Masanari Iida Signed-off-by: Dmitry Torokhov

Merge tag 'v4.15' into next

2018-02-01T08:41:33+00:00

Sync with mainline to get in trackpoint updates and other changes.

Input: remove atmel-wm97xx touchscreen driver

2018-01-19T17:35:24+00:00

Since AVR32 arch is gone, atmel-wm97xx driver is useless. In theory it could have been rewritten to work with AT91 devices, but the driver is from the platform data era, and a bit hard coded to work on AVR32 hardware variant of the AC97C peripheral, so let's remove it. Signed-off-by: Corentin Labbe Acked-by: Hans-Christian Noren Egtvedt Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-11-15T02:07:18+00:00

Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung S6SY761 - the timer API conversion (setup_timer() -> timer_setup()) - a few drivers swiytched to using managed API for creating custom device attributes - other assorted fixed and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits) Input: gamecon - mark expected switch fall-throughs Input: sidewinder - mark expected switch fall-throughs Input: spaceball - mark expected switch fall-throughs Input: uinput - unlock on allocation failure in ioctl Input: add support for the Samsung S6SY761 touchscreen Input: add support for HiDeep touchscreen Input: st1232 - remove obsolete platform device support Input: convert autorepeat timer to use timer_setup() media: ttpci: remove autorepeat handling and use timer_setup Input: cyttsp4 - avoid overflows when calculating memory sizes Input: mxs-lradc - remove redundant assignment to pointer input Input: add I2C attached EETI EXC3000 multi touch driver Input: goodix - support gt1151 touchpanel Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs Input: hil_mlc - convert to using timer_setup() Input: hp_sdc - convert to using timer_setup() Input: touchsceen - convert timers to use timer_setup() Input: keyboard - convert timers to use timer_setup() Input: uinput - fold header into the driver proper Input: uinput - remove uinput_allocate_device() ...

Input: add support for the Samsung S6SY761 touchscreen

2017-11-10T18:18:23+00:00

The S6SY761 touchscreen is a capicitive multi-touch controller for mobile use. It's connected with i2c at the address 0x48. This commit provides a basic version of the driver which can handle only initialization, touch events and power states. The controller is controlled by a firmware which, in the version I currently have, doesn't provide all the possible functionalities mentioned in the datasheet. Signed-off-by: Andi Shyti Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: add support for HiDeep touchscreen

2017-11-10T18:18:22+00:00

The HiDeep touchscreen device is a capacitive multi-touch controller mainly for multi-touch supported devices use. It use I2C interface for communication to IC and provide axis X, Y, Z locations for ten finger touch through input event interface to userspace. It support the Crimson and the Lime two type IC. They are different the number of channel supported and FW size. But the working protocol is same. Signed-off-by: Anthony Kim Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: add I2C attached EETI EXC3000 multi touch driver

2017-10-25T21:55:33+00:00

The 3000 series have a new protocol which allows to report up to 5 points in a single 66 byte frame. One must always read in 66 byte frames. To support up to 10 points, two consecutive frames need to be read: The first frame says how many points until sync. The second frame must say zero points or both frames must be discarded. To be able to work with the higher 400KHz I2C bus rate, one must successfully send a special package prior _each_ read or the controller will refuse to cooperate. This is a minimal implementation based on egalax_i2c.c (which can be found on the internet) and egalax_ts.c but without the vendor interface and no power management support. Signed-off-by: Ahmet Inan Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: usbtouchscreen - use EXPERT instead of EMBEDDED for EasyTouch

2017-09-26T18:52:09+00:00

Change control of TOUCHSCREEN_USB_EASYTOUCH prompt string from EMBEDDED to EXPERT to match the rest of this Kconfig file. Signed-off-by: Randy Dunlap Signed-off-by: Dmitry Torokhov