Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v3.5.3 2012-08-15T14:53:04+00:00 2012-08-15T14:53:04+00:00 Chris Bagwell chris@cnpbagwell.com 2012-06-12T07:25:48+00:00 urn:sha1:ec6942d015aab53df3a3b4aaf6755b4a039355a1 commit 6dc463511d4a690f01a9248df3b384db717e0b1c upstream. Bamboo One's with ID of 0x6a and 0x6b were added with correct indication of 1024 pressure levels but the Graphire packet routine was only looking at 9 bits. Increased to 10 bits. This bug caused these devices to roll over to zero pressure at half way mark. The other devices using this routine only support 256 or 512 range and look to fix unused bits at zero. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Reported-by: Tushant Mirchandani <tushantin@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-07-06T16:50:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-07-06T16:50:39+00:00 urn:sha1:1b74a8684e3c5cbbe5e798de9e07e3a087c7b853 Pull input layer fixes from Dmitry Torokhov: "Two fixes for regressions in Wacom driver and fixes for drivers using threaded IRQ framework without specifying IRQF_ONESHOT." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: request threaded-only IRQs with IRQF_ONESHOT Input: wacom - don't retrieve touch_max when it is predefined Input: wacom - fix retrieving touch_max bug Input: fix input.h kernel-doc warning 2012-06-29T00:02:45+00:00 Ping Cheng pinglinux@gmail.com 2012-06-28T23:47:30+00:00 urn:sha1:1cecc5cc0658e128bcad0b29edb96f286066571d Some models, such as 0xE6, report more fingers than we process. Reported-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Nils Kanning <nils@kanning.de> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2012-06-29T00:02:40+00:00 Ping Cheng pinglinux@gmail.com 2012-06-28T23:46:27+00:00 urn:sha1:61c91dd4a58b21a783e37208f4d02e3cb4b637c4 rep_data is not an array anymore, so taking it's address when passing to wacom_get_report() is wrong. Signed-off-by: Ping Cheng <pingc@wacom.com> Tested-by: Rafi Rubin <rafi@seas.upenn.edu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2012-05-24T17:34:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-05-24T17:34:29+00:00 urn:sha1:2c01e7bc46f10e9190818437e564f7e0db875ae9 Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ... 2012-05-04T22:33:13+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-05-04T22:33:13+00:00 urn:sha1:65e78a2062d5e56f906d52c45820d08711d2c2e2 Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-04T22:33:11+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-05-04T22:33:11+00:00 urn:sha1:ed2b2f2db2d52098bdda3877367d59984febdd9f Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-04T22:33:09+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-05-04T22:33:09+00:00 urn:sha1:27c2597d455a24507f1d0be6991a0a84b5c1b035 Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-04T22:33:06+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-05-04T22:33:06+00:00 urn:sha1:871ba51c130d4f2e7d33b8c57e834df701357102 Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jesper Juhl <jj@chaosbits.net> CC: JJ Ding <dgdunix@gmail.com> CC: Edwin van Vliet <edwin@cheatah.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2012-05-04T22:33:04+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2012-05-04T22:33:04+00:00 urn:sha1:334698d435b4446d796a2059284256b9d28a0d19 Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>