kernel/linux.git/drivers/input/rmi4, branch v4.14.152

Input: synaptics-rmi4 - avoid processing unknown IRQs

2019-10-29T08:17:33+00:00

commit 363c53875aef8fce69d4a2d0873919ccc7d9e2ad upstream. rmi_process_interrupt_requests() calls handle_nested_irq() for each interrupt status bit it finds. If the irq domain mapping for this bit had not yet been set up, then it ends up calling handle_nested_irq(0), which causes a NULL pointer dereference. There's already code that masks the irq_status bits coming out of the hardware with current_irq_mask, presumably to avoid this situation. However current_irq_mask seems to more reflect the actual mask set in the hardware rather than the IRQs software has set up and registered for. For example, in rmi_driver_reset_handler(), the current_irq_mask is initialized based on what is read from the hardware. If the reset value of this mask enables IRQs that Linux has not set up yet, then we end up in this situation. There appears to be a third unused bitmask that used to serve this purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask to avoid calling handle_nested_irq() on IRQs that have not yet been set up. Signed-off-by: Evan Green Reviewed-by: Andrew Duggan Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - fix possible double free

2019-05-16T17:42:25+00:00

[ Upstream commit bce1a78423961fce676ac65540a31b6ffd179e6d ] The RMI4 function structure has been released in rmi_register_function if error occurs. However, it will be released again in the function rmi_create_function, which may result in a double-free bug. Signed-off-by: Pan Bian Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: synaptics-rmi4 - write config register values to the right offset

2019-05-02T07:40:29+00:00

commit 3a349763cf11e63534b8f2d302f2d0c790566497 upstream. Currently any changed config register values don't take effect, as the function to write them back is called with the wrong register offset. Fixes: ff8f83708b3e (Input: synaptics-rmi4 - add support for 2D sensors and F11) Signed-off-by: Lucas Stach Reviewed-by: Philipp Zabel Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - fix axis-swap behavior

2018-08-24T11:08:56+00:00

[ Upstream commit 645a397d325db6e1bb36588095ae637738b37693 ] The documentation for the touchscreen-swapped-x-y property states that swapping is done after inverting if both are used. RMI4 did it the other way around, leading to inconsistent behavior with regard to other touchscreens. Signed-off-by: Lucas Stach Tested-by: Nick Dyer Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - fix an unchecked out of memory error path

2018-06-20T19:02:40+00:00

[ Upstream commit 839c42273617787318da7baf6151d553108f5e17 ] When extending the rmi_spi buffers, we must check that no out of memory error occurs, otherwise we may access data above the currently allocated memory. Propagate the error code returned by 'rmi_spi_manage_pools()' instead. Signed-off-by: Christophe JAILLET Reviewed-by: Andrew Duggan Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - do not delete interrupt memory too early

2018-02-03T16:39:24+00:00

commit a1ab69021a584d952e6548a44b93760547b1b6b5 upstream. We want to free memory reserved for interrupt mask handling only after we free functions, as function drivers might want to mask interrupts. This is needed for the followup patch to the F03 that would implement unmasking and masking interrupts from the serio pass-through port open() and close() methods. Reviewed-by: Lyude Paul Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - unmask F03 interrupts when port is opened

2018-02-03T16:39:24+00:00

commit 6abe534f0776d2437c8302f58d8eb5abd483e926 upstream. Currently we register the pass-through serio port when we probe the F03 RMI function, and then, in sensor configure phase, we unmask interrupts. Unfortunately this is too late, as other drivers are free probe devices attached to the serio port as soon as it is probed. Because interrupts are masked, the IO times out, which may result in not being able to detect trackpoints on the pass-through port. To fix the issue we implement open() and close() methods for the pass-through serio port and unmask interrupts from there. We also move creation of the pass-through port form probe to configure stage, as RMI driver does not enable transport interrupt until all functions are probed (we should change this, but this is a separate topic). We also try to clear the pending data before unmasking interrupts, because some devices like to spam the system with multiple 0xaa 0x00 announcements, which may interfere with us trying to query ID of the device. Fixes: c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03") Reviewed-by: Lyude Paul Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: synaptics-rmi4 - prevent UAF reported by KASAN

2018-01-23T18:58:16+00:00

commit 55edde9fff1ae4114c893c572e641620c76c9c21 upstream. KASAN found a UAF due to dangling pointer. As the report below says, rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in rmi_irq_fn. [ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162 [ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2 [ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017 [ 311.424078] Call Trace: [ 311.424086] dump_stack+0xae/0x12d [ 311.424090] ? _atomic_dec_and_lock+0x103/0x103 [ 311.424094] ? show_regs_print_info+0xa/0xa [ 311.424099] ? input_handle_event+0x10b/0x810 [ 311.424104] print_address_description+0x65/0x229 [ 311.424108] kasan_report.cold.5+0xa7/0x281 [ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424123] ? memcpy+0x1f/0x50 [ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core] [ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core] [ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core] [ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424177] ? free_irq+0xa0/0xa0 [ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180 [ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424193] ? irq_thread_fn+0x3d/0x80 [ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180 [ 311.424200] ? irq_thread+0x21d/0x290 [ 311.424203] ? irq_thread_check_affinity+0x170/0x170 [ 311.424207] ? remove_wait_queue+0x150/0x150 [ 311.424212] ? kasan_unpoison_shadow+0x30/0x40 [ 311.424214] ? __init_waitqueue_head+0xa0/0xd0 [ 311.424218] ? task_non_contending.cold.55+0x18/0x18 [ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0 [ 311.424226] ? irq_thread_check_affinity+0x170/0x170 [ 311.424230] ? kthread+0x19e/0x1c0 [ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 311.424237] ? ret_from_fork+0x32/0x40 [ 311.424244] Allocated by task 899: [ 311.424249] kasan_kmalloc+0xbf/0xe0 [ 311.424252] __kmalloc_track_caller+0xd9/0x1f0 [ 311.424255] kmemdup+0x17/0x40 [ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core] [ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi] [ 311.424278] hid_input_report+0x1a8/0x2c0 [hid] [ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid] [ 311.424286] irq_thread_fn+0x3d/0x80 [ 311.424288] irq_thread+0x21d/0x290 [ 311.424291] kthread+0x19e/0x1c0 [ 311.424293] ret_from_fork+0x32/0x40 [ 311.424296] Freed by task 1162: [ 311.424300] kasan_slab_free+0x71/0xc0 [ 311.424303] kfree+0x90/0x190 [ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core] [ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core] [ 311.424322] irq_thread_fn+0x3d/0x80 [ 311.424324] irq_thread+0x21d/0x290 [ 311.424327] kthread+0x19e/0x1c0 [ 311.424330] ret_from_fork+0x32/0x40 [ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64 [ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100) [ 311.424344] The buggy address belongs to the page: [ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0 [ 311.424353] flags: 0x17ffffc0000100(slab) [ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a [ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000 [ 311.424366] page dumped because: kasan: bad access detected [ 311.424369] Memory state around the buggy address: [ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb [ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb [ 311.424384] ^ [ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb Signed-off-by: Nick Desaulniers Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-11-10T22:14:23+00:00

Pull input layer updates from Dmitry Torokhov: - a new ACPI ID for Elan touchpad found in yet another Ideapad model - Synaptics RMI4 will allow binding to controllers reporting SMB version 3 (note that we are not adding any new ACPI IDs to the Synaptics PS/2 drover so unless user explicitly enables intertouch support there is no user-visible change) - a fixup to TSC 2004/5 touchscreen driver to mark input devices as "direct" to help userspace identify the type of device they are dealing with * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3 Input: tsc200x-core - set INPUT_PROP_DIRECT Input: elan_i2c - add ELAN060C to the ACPI table

Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3

2017-11-08T01:45:07+00:00

Some Synaptics devices, such as LEN0073, use SMBUS version 3. Signed-off-by: Yiannis Marangos Acked-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov