kernel/linux.git/drivers/input/mouse/psmouse.h, branch linux-4.13.y

Input: synaptics - add support for Intertouch devices

2017-03-25T17:37:30+00:00

Most of the Synaptics devices are connected through PS/2 and a different bus (SMBus or HID over I2C). The secondary bus capability is indicated by the InterTouch bit in extended capability 0x0C. We only enable the InterTouch device to be created for the laptops registered with the top software button property or those we know that are functional. In the future, we might change the default to always rely on the InterTouch bus. Currently, users can enable/disable the feature with the psmouse parameter synaptics_intertouch. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: psmouse - add support for SMBus companions

2017-03-25T17:37:29+00:00

This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: psmouse - introduce notion of SMBus companions

2017-03-25T17:37:28+00:00

Prepare PS/2 mouse drivers to work with devices that are accessible both via PS/2 and SMBus, which provides higher bandwidth, and thus suits better for modern multi-touch devices. We expect that SMBus drivers will take control over the device, so when we detect SMBus "protocol" we forego registering input device, or enabling PS/2 device reports (as it usually makes device unresponsive to access over SMBus). Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: psmouse - store pointer to current protocol

2017-03-25T17:37:27+00:00

Instead of storing only protocol "type" in pmsouse structure, store pointer to the protocol structure, so that we have access to more data without having to copy it over to psmouse structure. Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: psmouse - implement fast reconnect option

2017-03-25T17:37:27+00:00

Make use of serio's fast reconnect option and allow psmouse protocol handler's to implement fast reconnect handlers that will be called during system resume. Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: psmouse - add a custom serio protocol to send extra information

2017-02-09T19:43:15+00:00

The tracksticks on the Lenovo thinkpads have their buttons connected through the touchpad device. We already fixed that in synaptics.c, but when we switch the device into RMI4 mode to have proper support, the pass-through functionality can't deal with them easily. We add a new PS/2 flag and protocol designed for psmouse. The RMI4 F03 pass-through can then emit a special set of commands to notify psmouse the state of the buttons. This patch implements the protocol in psmouse, while an other will do the same for rmi4-f03. Signed-off-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov

Input: byd - add BYD PS/2 touchpad driver

2016-01-28T01:27:25+00:00

Driver for the BYD BTP10463 touchpad, found in PC Specialist `Lafite' laptops. This patch sends the magic command sequence which causes the touchpad to stream intellimouse-style packets. Gestures are detected inside the touchpad, and exposed as special values in the Z component of each packet - absolute coordinates are not supported, even in the Windows driver. At present, this supports two-finger vertical and horizontal scrolling, and provides the framework to expose the other gestures it can recognize. Signed-off-by: Chris Diamand Signed-off-by: Dmitry Torokhov

Input: add vmmouse driver

2015-04-14T21:29:03+00:00

VMMouse enables low-latency mouse-cursor-movements for VMWare and QEMU guests. By removing the guest cursor and using the host as a guest cursor the cursor movement appears instant although in reality there is some lag. To be able to do this, the host's view of the cursor position must exactly match the guest's view and an absolute pointer device is needed. Enter the VMMouse. While the VMMouse driver has historically been an Xorg user-space driver, implementing it as a kernel imput driver enables rootless Xorg and new compositing display servers for VMware guests. Signed-off-by: Thomas Hellstrom Signed-off-by: Dmitry Torokhov

Input: psmouse - disable changing resolution/rate/scale for FocalTech

2015-03-07T21:40:21+00:00

These PS/2 commands make some touchpads stop responding, so this commit adds some dummy functions to replace the generic implementation. Because scale changes were not encapsulated in a method of struct psmouse yet, this commit adds a method set_scale to psmouse. Signed-off-by: Mathias Gottschlag Signed-off-by: Dmitry Torokhov

Input: psmouse - support for the FocalTech PS/2 protocol extensions

2014-12-29T17:51:37+00:00

Most of the protocol for these touchpads has been reverse engineered. This commit adds a basic multitouch-capable driver. A lot of the protocol is still unknown. Especially, we don't know how to identify the device yet apart from the PNP ID. The previous workaround for these devices has been left in place in case the driver is not compiled into the kernel or in case some other device with the same PNP ID is not recognized by the driver yet still has the same problems with the device probing code. Signed-off-by: Mathias Gottschlag Reviewed-by: Hans de Goede Signed-off-by: Dmitry Torokhov