kernel/linux.git/drivers/input/mouse/alps.c, branch v4.14.217

Input: alps - fix a mismatch between a condition check and its comment

2019-07-31T05:28:36+00:00

commit 771a081e44a9baa1991ef011cc453ef425591740 upstream. In the function alps_is_cs19_trackpoint(), we check if the param[1] is in the 0x20~0x2f range, but the code we wrote for this checking is not correct: (param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f, it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f... Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20). Fixes: 7e4935ccc323 ("Input: alps - don't handle ALPS cs19 trackpoint-only device") Cc: stable@vger.kernel.org Signed-off-by: Hui Wang Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: alps - don't handle ALPS cs19 trackpoint-only device

2019-07-31T05:28:36+00:00

commit 7e4935ccc3236751e5fe4bd6846f86e46bb2e427 upstream. On a latest Lenovo laptop, the trackpoint and 3 buttons below it don't work at all, when we move the trackpoint or press those 3 buttons, the kernel will print out: "Rejected trackstick packet from non DualPoint device" This device is identified as an alps touchpad but the packet has trackpoint format, so the alps.c drops the packet and prints out the message above. According to XiaoXiao's explanation, this device is named cs19 and is trackpoint-only device, its firmware is only for trackpoint, it is independent of touchpad and is a device completely different from DualPoint ones. To drive this device with mininal changes to the existing driver, we just let the alps driver not handle this device, then the trackpoint.c will be the driver of this device if the trackpoint driver is enabled. (if not, this device will fallback to a bare PS/2 device) With the trackpoint.c, this trackpoint and 3 buttons all work well, they have all features that the trackpoint should have, like scrolling-screen, drag-and-drop and frame-selection. Signed-off-by: XiaoXiao Liu Signed-off-by: Hui Wang Reviewed-by: Pali Rohár Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370

2018-04-08T12:26:32+00:00

commit 567b9b549cfa1cbc202762ae97b5385c29ade1e3 upstream. The primary interface for the touchpad device in Thinkpad L570 is SMBus, so ALPS overlooked PS2 interface Firmware setting of TrackStick, and shipped with TrackStick otp bit is disabled. The address 0xD7 contains device number information, so we can identify the device by checking this value, but to access it we need to enable Command mode, and then re-enable the device. Devices shipped in Thinkpad L570 report either 0x0C or 0x1D as device numbers, if we see them we assume that the devices are DualPoints. The same issue exists on Dell Latitude 7370. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929 Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads") Signed-off-by: Masaki Ota Tested-by: Aaron Ma Tested-by: Jonathan Liu Tested-by: Jaak Ristioja Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: ALPS - fix multi-touch decoding on SS4 plus touchpads

2018-01-23T18:58:15+00:00

commit 4d94e776bd29670f01befa27e12df784fa05fa2e upstream. The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry Reviewed-by: Masaki Ota Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad

2017-08-24T22:53:46+00:00

Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396c6d5 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by: Masaki Ota Tested-by: Takashi Iwai Tested-by: Paul Donohue Cc: Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov

Merge tag 'v4.11-rc5' into next

2017-04-03T19:01:20+00:00

Sync up with mainline to bring in changes to input subsystem merged through other trees.

Input: ALPS - fix trackstick button handling on V8 devices

2017-03-17T21:25:04+00:00

Alps stick devices always have physical buttons, so we should not check ALPS_BUTTONPAD flag to decide whether we should report them. Fixes: 4777ac220c43 ("Input: ALPS - add touchstick support for SS5 hardware") Signed-off-by: Masaki Ota Acked-by: Pali Rohar Tested-by: Paul Donohue Tested-by: Nick Fletcher Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: ALPS - fix V8+ protocol handling (73 03 28)

2017-03-17T21:25:03+00:00

Devices identified as E7="73 03 28" use slightly modified version of V8 protocol, with lower count per electrode, different offsets, and different feature bits in OTP data. Fixes: aeaa881f9b17 ("Input: ALPS - set DualPoint flag for 74 03 28 devices") Signed-off-by: Masaki Ota Acked-by: Pali Rohar Tested-by: Paul Donohue Tested-by: Nick Fletcher Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov

Input: alps - cleanup alps_model_data

2017-03-07T17:49:30+00:00

Sort all devices in alps_model_data by signature and remove command_mode_resp which is not used anymore. Signed-off-by: Pali Rohár Signed-off-by: Dmitry Torokhov

Input: alps - warn about unsupported ALPS V9 touchpad

2017-03-07T17:49:29+00:00

Support for devices with ALPS_PROTO_V9 is not implemented yet but we can detect these alps touchpads and warn users about it. Signed-off-by: Pali Rohár Signed-off-by: Dmitry Torokhov