kernel/linux.git/drivers/input/misc/Makefile, branch v6.6.132

Input: bbnsm_pwrkey - add bbnsm power key support

2023-02-21T21:56:35+00:00

The ON/OFF logic inside the BBNSM allows for connecting directly into a PMIC or other voltage regulator device. The module has an button input signal and a wakeup request input signal. It also has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an active-low PMIC enable (pmic_en_b) output. Add the power key support for the ON/OFF button function found in BBNSM module. Signed-off-by: Jacky Bai Reviewed-by: Peng Fan Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com Signed-off-by: Dmitry Torokhov

Input: Add tps65219 interrupt driven powerbutton

2022-12-07T13:28:15+00:00

TPS65219 has different interrupts compared to other TPS6521* chips. TPS65219 defines two interrupts for the powerbutton one for push and one for release. This driver is very simple in that it maps the push interrupt to a key input and the release interrupt to a key release. Signed-off-by: Markus Schneider-Pargmann Signed-off-by: Jerome Neanne Acked-by: Dmitry Torokhov Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20221104152311.1098603-6-jneanne@baylibre.com

mfd: Remove dm355evm_msp driver

2022-12-07T13:28:08+00:00

The DaVinci DM355EVM platform is gone after the removal of all unused board files, so the MTD device along with its sub-devices can be removed as well. Signed-off-by: Arnd Bergmann Acked-by: Bartosz Golaszewski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org

Input: rt5120 - add power key support

2022-08-31T22:48:49+00:00

Add RT5120 PMIC power key support. Signed-off-by: ChiYuan Huang Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.com Signed-off-by: Dmitry Torokhov

Input: Add IBM Operation Panel driver

2022-08-17T19:32:32+00:00

Add a driver to get the button events from the panel and provide them to userspace with the input subsystem. The panel is connected with I2C and controls the bus, so the driver registers as an I2C slave device. Signed-off-by: Eddie James Reviewed-by: Joel Stanley Reviewed-by: Wolfram Sang # I2C slave parts Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com Signed-off-by: Dmitry Torokhov

Input: add support for Azoteq IQS7222A/B/C

2022-04-09T02:28:12+00:00

This patch adds support for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/20220403221659.865997-3-jeff@labundy.com Signed-off-by: Dmitry Torokhov

Input: remove dead CSR Prima2 PWRC driver

2021-08-30T22:55:19+00:00

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig. Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.com Signed-off-by: Dmitry Torokhov

Input: ixp4xx-beeper - delete driver

2021-07-19T21:32:10+00:00

The NSLU2 has been migrated to devicetree and there we use the gpio-beeper.c driver instead, the boardfile will be deleted for kernel v5.15 so drop this custom and now unneeded driver. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210714115028.916360-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2021-05-07T06:37:55+00:00

Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series, and MStar MSG2638 - a new driver for Azoteq IQS626A proximity and touch controller - addition of Amazon Game Controller to the list of devices handled by the xpad driver - Elan touchscreen driver will avoid binding to devices described as I2CHID compatible in ACPI tables - various driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits) Input: xpad - add support for Amazon Game Controller Input: ili210x - add missing negation for touch indication on ili210x MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT Input: add driver for the Hycon HY46XX touchpanel series dt-bindings: touchscreen: Add HY46XX bindings dt-bindings: Add Hycon Technology vendor prefix Input: cyttsp - flag the device properly Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR Input: cyttsp - drop the phys path Input: cyttsp - reduce reset pulse timings Input: cyttsp - error message on boot mode exit error Input: apbps2 - remove useless variable Input: mms114 - support MMS136 Input: mms114 - convert bindings to YAML and extend Input: Add support for ILITEK Lego Series dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings Input: add MStar MSG2638 touchscreen driver dt-bindings: input/touchscreen: add bindings for msg2638 Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices ...

Input: Add support for Azoteq IQS626A

2021-03-25T18:14:10+00:00

This patch adds support for the Azoteq IQS626A capacitive touch controller. Signed-off-by: Jeff LaBundy Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov