kernel/linux.git/drivers/input/misc/Kconfig, branch v4.11.2

Input: delete MPU3050 driver

2017-01-31T08:18:07+00:00

The MPU3050 driver in the input subsystem has been superseded by a proper IIO driver found in drivers/iio/gyro/mpu3050*. Patches have been submitted to remove all defconfig and related references to the old driver and replace this input driver with the IIO driver. So delete the input driver. Input was never a good fit for sensors anyway. Signed-off-by: Linus Walleij Reviewed-by: Heikki Krogerus Signed-off-by: Dmitry Torokhov

Input: da9061 - onkey driver

2016-10-26T23:01:16+00:00

Copyright header is updated to add DA9061 in its description and the module description macro is extended to include DA9061. Minor change to the code, alters dev_dbg() statements to report a generic "PMIC" instead of DA9063. This device driver is compatible with DA9061, DA9062 and DA9063. Kconfig is updated to reflect support for DA9061/62/63. Signed-off-by: Steve Twiss Signed-off-by: Dmitry Torokhov

Input: tps65218-pwrbutton - add support for tps65217 variant

2016-09-10T17:47:49+00:00

The power button found in tps65217 device is very similar to the tps65218, so let's enhance the driver to support both variants. This driver enables us to use tps65217's power button as KEY_POWER on am335x boards (directly connected button in chiliboard, accessible pin via expansion header in beaglebone). This patch has been tested with chiliboard. Signed-off-by: Marcin Niestroj Signed-off-by: Dmitry Torokhov

Input: add generic input driver to read encoded GPIO lines

2016-08-30T03:24:23+00:00

Add a driver to read group of GPIO lines and provide its status as a numerical value as input event to the system. This will help in interfacing devices, that can be connected over GPIOs, that provide input to the system by driving GPIO lines connected to them like a rotary dial or a switch. For example, a rotary switch can be connected to four GPIO lines. The status of the GPIO lines reflect the actual position of the rotary switch dial. For example, if dial points to 9, then the four GPIO lines connected to the switch will read HLLH(0b'1001 = 9). This value can be reported as an ABS_* event to the input subsystem. Signed-off-by: Vignesh R Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: add powerkey driver for HISI 65xx SoC

2016-06-23T20:45:54+00:00

This driver provides a input driver for the power button on the HiSi 65xx SoC for boards like HiKey. This driver was originally by Zhiliang Xue then basically rewritten by Jorge, but preserving the original module author credits. Signed-off-by: Jorge Ramirez-Ortiz [jstultz: Reworked commit message, folded in other fixes/cleanups from Jorge, implemented some larger cleanups suggested by DmitryT] Signed-off-by: John Stultz Signed-off-by: Dmitry Torokhov

Input: atmel_captouch - add dependence on i2c

2016-05-19T16:35:14+00:00

The newly added Atmal captouch driver fails to build when CONFIG_I2C is disabled: drivers/input/misc/atmel_captouch.c: In function 'atmel_read': drivers/input/misc/atmel_captouch.c:115:8: error: implicit declaration of function 'i2c_transfer' [-Werror=implicit-function-declaration] This adds an explicit Kconfig dependency to prevent the broken configuration. Signed-off-by: Arnd Bergmann Fixes: b06d43f7a3db ("Input: add Atmel Captouch Button driver") Signed-off-by: Dmitry Torokhov

Input: add Atmel Captouch Button driver

2016-05-18T22:08:19+00:00

Add I2C driver for Atmel Capacitive Touch Button device. Signed-off-by: Hung-yu Wu Signed-off-by: Grant Grundler Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov

Input: sirfsoc-onkey - allow modular build

2016-01-27T23:55:14+00:00

CONFIG_INPUT may itself be a loadable module, but the sirf power key driver is listed as 'bool', which makes it possible to select a broken configuration with the driver built-in but the subsystem not loaded. In this configuration, we get a link error: drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': drivers/input/misc/sirfsoc-onkey.c:63: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_probe': drivers/input/misc/sirfsoc-onkey.c:132: undefined reference to `devm_input_allocate_device' drivers/input/misc/sirfsoc-onkey.c:139: undefined reference to `input_set_capability' drivers/input/misc/sirfsoc-onkey.c:161: undefined reference to `input_register_device' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': drivers/input/misc/sirfsoc-onkey.c:48: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0x24): undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0xbc): undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x104): undefined reference to `input_set_capability' drivers/input/built-in.o:(.debug_addr+0x128): undefined reference to `input_register_device' This marks the driver as 'tristate' so it becomes possible to have it in a loadable module, mainly to help with randconfig builds. We also have to add a missing semicolon here, which ended up not being needed in built-in mode because the following MODULE_DEVICE_TABLE is an empty macro followed by another semicolon then. Signed-off-by: Arnd Bergmann Signed-off-by: Dmitry Torokhov

Input: e3x0-button - update Kconfig description

2015-10-26T08:39:07+00:00

The driver is now used for the entire USRP e3xx series, this commit fixes the description that will be displayed in the menu accordingly. Signed-off-by: Moritz Fischer Signed-off-by: Dmitry Torokhov

Input: add DA9062 OnKey capability to DA9063 OnKey driver

2015-09-29T23:50:07+00:00

Add DA9062 OnKey support into the existing DA9063 OnKey driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 OnKey. The following alterations have been made to the DA9063 OnKey: - Addition of a da906x_chip_config structure to hold all generic registers and bitmasks for this type of OnKey component. - Addition of an struct of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_onkey accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_onkey_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by: Steve Twiss Signed-off-by: Dmitry Torokhov