kernel/linux.git/drivers/input/keyboard, branch v6.6.132

Input: imx_sc_key - fix memory corruption on unload

2025-12-01T10:41:41+00:00

commit d83f1512758f4ef6fc5e83219fe7eeeb6b428ea4 upstream. This is supposed to be "priv" but we accidentally pass "&priv" which is an address in the stack and so it will lead to memory corruption when the imx_sc_key_action() function is called. Remove the &. Fixes: 768062fd1284 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups") Signed-off-by: Dan Carpenter Reviewed-by: Peng Fan Reviewed-by: Frank Li Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: cros_ec_keyb - fix an invalid memory access

2025-12-01T10:41:41+00:00

commit e08969c4d65ac31297fcb4d31d4808c789152f68 upstream. If cros_ec_keyb_register_matrix() isn't called (due to `buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains NULL. An invalid memory access is observed in cros_ec_keyb_process() when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work() in such case. Unable to handle kernel read from unreadable memory at virtual address 0000000000000028 ... x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: input_event cros_ec_keyb_work blocking_notifier_call_chain ec_irq_thread It's still unknown about why the kernel receives such malformed event, in any cases, the kernel shouldn't access `ckdev->idev` and friends if the driver doesn't intend to initialize them. Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT

2025-08-01T08:47:28+00:00

commit f4a8f561d08e39f7833d4a278ebfb12a41eef15f upstream. When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context. Fixes: 019002f20cb5 ("Input: gpio-keys - use hrtimer for release timer") Suggested-by: Sebastian Andrzej Siewior Signed-off-by: Fabrice Gasnier Signed-off-by: Gatien Chevallier Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-1-3fc55a9c3619@foss.st.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov [ adjusted context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID

2025-07-17T16:35:22+00:00

commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 upstream. After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") not only the getid command is skipped, but also the de-activating of the keyboard at the end of atkbd_probe(), potentially re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd - fix multi-byte scancode handling on reconnect"). Make sure multi-byte scancode handling on reconnect is still handled correctly by not skipping the atkbd_deactivate() call. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Wang Hai Signed-off-by: Greg Kroah-Hartman

Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer()

2025-06-27T10:08:48+00:00

commit 8f38219fa139623c29db2cb0f17d0a197a86e344 upstream. gpio_keys_irq_isr() and gpio_keys_irq_timer() access the same resources. There could be a concurrent access if a GPIO interrupt occurs in parallel of a HR timer interrupt. Guard back those resources with a spinlock. Fixes: 019002f20cb5 ("Input: gpio-keys - use hrtimer for release timer") Signed-off-by: Gatien Chevallier Link: https://lore.kernel.org/r/20250528-gpio_keys_preempt_rt-v2-2-3fc55a9c3619@foss.st.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: mtk-pmic-keys - fix possible null pointer dereference

2025-05-18T06:24:06+00:00

commit 11cdb506d0fbf5ac05bf55f5afcb3a215c316490 upstream. In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway. Fixes: b581acb49aec ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs") Signed-off-by: Gary Bisson Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atkbd - map F23 key to support default copilot shortcut

2025-02-01T17:37:56+00:00

commit 907bc9268a5a9f823ffa751957a5c1dd59f83f42 upstream. Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a dedicated keycode, and multiple vendors have their keyboards emit this sequence in response to users pressing a dedicated "Copilot" key. Unfortunately the default keymap table in atkbd does not map scancode 0x6e (F23) and so the key combination does not work even if userspace is ready to handle it. Because this behavior is common between multiple vendors and the scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that key sequence is generated properly. MS documentation for the scan code: https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes Confirmed on Lenovo, HP and Dell machines by Canonical. Tested on Lenovo T14s G6 AMD. Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: adp5589-keys - fix adp5589_gpio_get_value()

2024-10-10T09:57:57+00:00

commit c684771630e64bc39bddffeb65dd8a6612a6b249 upstream. The adp5589 seems to have the same behavior as similar devices as explained in commit 910a9f5636f5 ("Input: adp5588-keys - get value from data out when dir is out"). Basically, when the gpio is set as output we need to get the value from ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A. Fixes: 9d2e173644bb ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander") Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: adp5589-keys - fix NULL pointer dereference

2024-10-10T09:57:57+00:00

commit fb5cc65f973661241e4a2b7390b429aa7b330c69 upstream. We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early. Fixes: 30df385e35a4 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear") Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: adp5588-keys - fix check on return code

2024-10-04T14:29:46+00:00

commit eb017f4ea13b1a5ad7f4332279f2e4c67b44bdea upstream. During adp5588_setup(), we read all the events to clear the event FIFO. However, adp5588_read() just calls i2c_smbus_read_byte_data() which returns the byte read in case everything goes well. Hence, we need to explicitly check for a negative error code instead of checking for something different than 0. Fixes: e960309ce318 ("Input: adp5588-keys - bail out on returned error") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman