kernel/linux.git/drivers/input/keyboard, branch v4.4.171

Input: omap-keypad - fix idle configuration to not block SoC idle states

2019-01-13T09:05:32+00:00

[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov . From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: omap-keypad - fix keyboard debounce configuration

2018-12-21T13:09:53+00:00

[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: matrix_keypad - check for errors from of_get_named_gpio()

2018-12-13T08:21:31+00:00

commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff Suggested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: atakbd - fix Atari CapsLock behaviour

2018-10-20T07:52:37+00:00

[ Upstream commit 52d2c7bf7c90217fbe875d2d76f310979c48eb83 ] The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Andreas Schwab Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: atakbd - fix Atari keymap

2018-10-20T07:52:37+00:00

[ Upstream commit 9e62df51be993035c577371ffee5477697a56aad ] Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab , keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Andreas Schwab Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: qt1070 - add OF device ID table

2018-03-22T08:23:22+00:00

[ Upstream commit cf5cd9d4480a87da78768718cac194a71079b5cb ] The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. The compatible strings don't have a vendor prefix because that's how it's used currently, and changing this will be a Device Tree ABI break. Signed-off-by: Javier Martinez Canillas Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Input: tca8418_keypad - remove double read of key event register

2018-03-18T10:17:51+00:00

commit 9dd46c02532a6bed6240101ecf4bbc407f8c6adf upstream. There is no need to tread the same register twice in a row. Fixes: ea4348c8462a ("Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-un ...") Signed-off-by: Dmitry Torokhov Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

Input: matrix_keypad - fix race when disabling interrupts

2018-03-18T10:17:49+00:00

commit ea4f7bd2aca9f68470e9aac0fc9432fd180b1fe7 upstream. If matrix_keypad_stop() is executing and the keypad interrupt is triggered, disable_row_irqs() may be called by both matrix_keypad_interrupt() and matrix_keypad_stop() at the same time, causing interrupts to be disabled twice and the keypad being "stuck" after resuming. Take lock when setting keypad->stopped to ensure that ISR will not race with matrix_keypad_stop() disabling interrupts. Signed-off-by: Zhang Bo Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warning

2018-02-25T10:03:49+00:00

commit ea4348c8462a20e8b1b6455a7145d2b86f8a49b6 upstream. Older versions of gcc warn about the tca8418_irq_handler function as they can't keep track of the variable assignment inside of the loop when using the -Wmaybe-unintialized flag: drivers/input/keyboard/tca8418_keypad.c: In function ‘tca8418_irq_handler’: drivers/input/keyboard/tca8418_keypad.c:172:9: error: ‘reg’ may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/input/keyboard/tca8418_keypad.c:165:5: note: ‘reg’ was declared here This is fixed in gcc-6, but it's possible to rearrange the code in a way that avoids the warning on older compilers as well. Signed-off-by: Arnd Bergmann Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: mpr121 - set missing event capability

2017-11-15T16:13:10+00:00

[ Upstream commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d ] This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by: Akinobu Mita Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman