kernel/linux.git/drivers/input/keyboard, branch v4.19.112

Input: nomadik-ske-keypad - fix a loop timeout test

2020-01-27T13:50:07+00:00

[ Upstream commit 4d8f727b83bcd6702c2d210330872c9122d2d360 ] The loop exits with "timeout" set to -1 not to 0. Fixes: 1158f0f16224 ("Input: add support for Nomadik SKE keypad controller") Signed-off-by: Dan Carpenter Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: imx_keypad - make sure keyboard can always wake up system

2019-07-14T06:11:09+00:00

[ Upstream commit ce9a53eb3dbca89e7ad86673d94ab886e9bea704 ] There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress. To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status. Signed-off-by: Anson Huang Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ

2019-05-08T05:21:53+00:00

commit bf2a7ca39fd3ab47ef71c621a7ee69d1813b1f97 upstream. SNVS IRQ is requested before necessary driver data initialized, if there is a pending IRQ during driver probe phase, kernel NULL pointer panic will occur in IRQ handler. To avoid such scenario, just initialize necessary driver data before enabling IRQ. This patch is inspired by NXP's internal kernel tree. Fixes: d3dc6e232215 ("input: keyboard: imx: add snvs power key driver") Signed-off-by: Anson Huang Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: st-keyscan - fix potential zalloc NULL dereference

2019-03-23T19:09:47+00:00

[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ] This patch fixes the following static checker warning: drivers/input/keyboard/st-keyscan.c:156 keyscan_probe() error: potential zalloc NULL dereference: 'keypad_data->input_dev' Reported-by: Dan Carpenter Signed-off-by: Gabriel Fernandez Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: matrix_keypad - use flush_delayed_work()

2019-03-23T19:09:44+00:00

[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ] We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: cap11xx - switch to using set_brightness_blocking()

2019-03-23T19:09:44+00:00

[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ] Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by: Sven Van Asbroeck Reviewed-by: Sven Van Asbroeck Acked-by: Jacek Anaszewski Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: omap-keypad - fix idle configuration to not block SoC idle states

2019-01-13T08:50:58+00:00

[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov . From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: omap-keypad - fix keyboard debounce configuration

2018-12-21T13:15:20+00:00

[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin

Input: cros_ec_keyb - fix button/switch capability reports

2018-12-08T11:59:09+00:00

commit ac5722c1643a2fb75224c79b578214956d34f989 upstream. The cros_ec_keyb_bs array lists buttons and switches together, expecting that its users will match the appropriate type and bit fields. But cros_ec_keyb_register_bs() only checks the 'bit' field, which causes misreported input capabilities in some cases. For example, tablets (e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to share the same bit. (This has comedic effect on a tablet, in which a power-management daemon then thinks this "lid" is closed, and so puts the system to sleep as soon as it boots!) To fix this, check both the 'ev_type' and 'bit' fields before reporting the capability. Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid (Scarlet / Acer Chromebook Tab 10). This error got introduced when porting the feature from the downstream Chromium OS kernel to be upstreamed. Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches") Cc: Signed-off-by: Brian Norris Reviewed-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: matrix_keypad - check for errors from of_get_named_gpio()

2018-12-08T11:59:09+00:00

commit d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff Suggested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman