kernel/linux.git/drivers/input/joystick/Kconfig, branch linux-5.11.y

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-10-23T23:16:31+00:00

Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...

Input: joystick - add ADC attached joystick driver.

2020-09-28T23:26:11+00:00

Add a driver for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. Signed-off-by: Artur Rojek Tested-by: Paul Cercueil Tested-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200927123302.31062-2-contact@artur-rojek.eu Signed-off-by: Dmitry Torokhov

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

Input: adi - work around module name confict

2020-06-09T19:53:49+00:00

Making module name conflicts a fatal error breaks sparc64 allmodconfig: Error log: error: the following would cause module name conflict: drivers/char/adi.ko drivers/input/joystick/adi.ko Renaming one of the modules would solve the problem, but then cause other problems because neither of them is automatically loaded and changing the name is likely to break any setup that relies on manually loading it by name. As there is probably no sparc64 system with this kind of ancient joystick attached, work around it by adding a Kconfig dependency that forbids them from both being modules. It is still possible to build the joystick driver if the sparc64 adi driver is built-in. Reported-by: Guenter Roeck Acked-by: Greg Kroah-Hartman Signed-off-by: Arnd Bergmann Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.de Signed-off-by: Dmitry Torokhov

Input: psxpad-spi - switch to using polled mode of input devices

2019-10-30T00:13:36+00:00

We have added polled mode to the normal input devices with the intent of retiring input_polled_dev. This converts psxpad-spi driver to use the polling mode of standard input devices and removes dependency on INPUT_POLLDEV. Link: https://lore.kernel.org/r/20191001220421.GA66693@dtor-ws Signed-off-by: Dmitry Torokhov

Input: add support for the FlySky FS-iA6B RC receiver

2019-07-22T04:35:24+00:00

This patch adds support for the FlySky FS-iA6B RC receiver (serial IBUS). It allows the usage of the FlySky FS-i6 and other AFHDS compliant remote controls as a joystick input device. To use it, a patch to inputattach which adds the FS-iA6B as a 115200 baud serial device is required. I will upstream it after this patch is merged. More information about the hardware can be found here: https://notsyncing.net/?p=blog&b=2018.linux-fsia6b Signed-off-by: Markus Koch Signed-off-by: Dmitry Torokhov

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

docs: Fix some broken references

2018-06-15T21:10:01+00:00

As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai Acked-by: Masami Hiramatsu Acked-by: Stephen Boyd Acked-by: Charles Keepax Acked-by: Mathieu Poirier Reviewed-by: Coly Li Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

docs: fix broken references with multiple hints

2018-06-15T21:10:01+00:00

The script: ./scripts/documentation-file-ref-check --fix Gives multiple hints for broken references on some files. Manually use the one that applies for some files. Acked-by: Steven Rostedt (VMware) Acked-by: James Morris Signed-off-by: Mauro Carvalho Chehab Acked-by: Jonathan Corbet

Input: pxrc - new driver for PhoenixRC Flight Controller Adapter

2018-03-26T22:22:20+00:00

This driver let you plug in your RC controller to the adapter and use it as input device in various RC simulators. Signed-off-by: Marcus Folkesson Signed-off-by: Dmitry Torokhov