kernel/linux.git/drivers/infiniband, branch v4.19.16

RDMA/srpt: Fix a use-after-free in the channel release code

2019-01-13T08:51:09+00:00

commit ed041919f0d23c109d52cde8da6ddc211c52d67e upstream. This patch avoids that KASAN sporadically reports the following: BUG: KASAN: use-after-free in rxe_run_task+0x1e/0x60 [rdma_rxe] Read of size 1 at addr ffff88801c50d8f4 by task check/24830 CPU: 4 PID: 24830 Comm: check Not tainted 4.20.0-rc6-dbg+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x86/0xca print_address_description+0x71/0x239 kasan_report.cold.5+0x242/0x301 __asan_load1+0x47/0x50 rxe_run_task+0x1e/0x60 [rdma_rxe] rxe_post_send+0x4bd/0x8d0 [rdma_rxe] srpt_zerolength_write+0xe1/0x160 [ib_srpt] srpt_close_ch+0x8b/0xe0 [ib_srpt] srpt_set_enabled+0xe7/0x150 [ib_srpt] srpt_tpg_enable_store+0xc0/0x100 [ib_srpt] configfs_write_file+0x157/0x1d0 __vfs_write+0xd7/0x3d0 vfs_write+0x102/0x290 ksys_write+0xab/0x130 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 13856: save_stack+0x43/0xd0 kasan_kmalloc+0xc7/0xe0 kasan_slab_alloc+0x11/0x20 kmem_cache_alloc+0x105/0x320 rxe_alloc+0xff/0x1f0 [rdma_rxe] rxe_create_qp+0x9f/0x160 [rdma_rxe] ib_create_qp+0xf5/0x690 [ib_core] rdma_create_qp+0x6a/0x140 [rdma_cm] srpt_cm_req_recv.cold.59+0x1588/0x237b [ib_srpt] srpt_rdma_cm_req_recv.isra.35+0x1d5/0x220 [ib_srpt] srpt_rdma_cm_handler+0x6f/0x100 [ib_srpt] cma_listen_handler+0x59/0x60 [rdma_cm] cma_ib_req_handler+0xd5b/0x2570 [rdma_cm] cm_process_work+0x2e/0x110 [ib_cm] cm_work_handler+0x2aae/0x502b [ib_cm] process_one_work+0x481/0x9e0 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Freed by task 3440: save_stack+0x43/0xd0 __kasan_slab_free+0x139/0x190 kasan_slab_free+0xe/0x10 kmem_cache_free+0xbc/0x330 rxe_elem_release+0x66/0xe0 [rdma_rxe] rxe_destroy_qp+0x3f/0x50 [rdma_rxe] ib_destroy_qp+0x140/0x360 [ib_core] srpt_release_channel_work+0xdc/0x310 [ib_srpt] process_one_work+0x481/0x9e0 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: Sergey Gorenko Cc: Max Gurtovoy Cc: Laurence Oberman Cc: Signed-off-by: Bart Van Assche Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

rxe: fix error completion wr_id and qp_num

2019-01-13T08:51:09+00:00

commit e48d8ed9c6193502d849b35767fd18e20bbd7ba2 upstream. Error completions must still contain a valid wr_id and qp_num such that the consumer can rely on. Correctly fill these fields in receive error completions. Reported-by: Walker Benjamin Cc: stable@vger.kernel.org Signed-off-by: Sagi Grimberg Reviewed-by: Zhu Yanjun Tested-by: Zhu Yanjun Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

IB/core: Fix oops in netdev_next_upper_dev_rcu()

2019-01-13T08:50:57+00:00

[ Upstream commit 37fbd834b4e492dc41743830cbe435f35120abd8 ] When support for bonding of RoCE devices was added, there was necessarily a link between the RoCE device and the paired netdevice that was part of the bond. If you remove the mlx4_en module, that paired association is broken (the RoCE device is still present but the paired netdevice has been released). We need to account for this in is_upper_ndev_bond_master_filter() and filter out those links with a broken pairing or else we later oops in netdev_next_upper_dev_rcu(). Fixes: 408f1242d940 ("IB/core: Delete lower netdevice default GID entries in bonding scenario") Signed-off-by: Mark Zhang Reviewed-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/mlx5: Block DEVX umem from the non applicable cases

2019-01-13T08:50:56+00:00

[ Upstream commit 47f07f03b5ee436fe074c4fb1fb28d013c36a0d8 ] Blocks creating a DEVX UMEM with the non applicable access flags as of ODP, MW_BIND, etc. Specifically when an ODP flag is used below WARN call trace is issued. [ 2510.404131] RIP: 0010:__mlx5_ib_populate_pas+0x207/0x220 [mlx5_ib] ... [ 2510.404143] Call Trace: [ 2510.404150] ? __kmalloc_node+0x1b3/0x280 [ 2510.404156] ? _uverbs_alloc+0x63/0x90 [ib_uverbs] [ 2510.404158] ? _uverbs_alloc+0x63/0x90 [ib_uverbs] [ 2510.404162] mlx5_ib_populate_pas+0x53/0x60 [mlx5_ib] [ 2510.404167] mlx5_ib_handler_MLX5_IB_METHOD_DEVX_UMEM_REG+0x273/0x3f0 [mlx5_ib] Fixes: aeae94579caf ("IB/mlx5: Add DEVX support for memory registration") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/hfi1: Incorrect sizing of sge for PIO will OOPs

2019-01-09T16:38:36+00:00

commit dbc2970caef74e8ff41923d302aa6fb5a4812d0e upstream. An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1] PGD 0 Oops: 0000 1 SMP Call Trace: ? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1] hfi1_verbs_send+0xdf/0x250 [hfi1] ? make_rc_ack+0xa80/0xa80 [hfi1] hfi1_do_send+0x192/0x430 [hfi1] hfi1_do_send_from_rvt+0x10/0x20 [hfi1] rvt_post_send+0x369/0x820 [rdmavt] ib_uverbs_post_send+0x317/0x570 [ib_uverbs] ib_uverbs_write+0x26f/0x420 [ib_uverbs] ? security_file_permission+0x21/0xa0 vfs_write+0xbd/0x1e0 ? mntput+0x24/0x40 SyS_write+0x7f/0xe0 system_call_fastpath+0x16/0x1b Fix by adding the missing sizing check to correctly determine the sge length. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

IB/hfi1: Remove race conditions in user_sdma send path

2018-12-21T13:15:12+00:00

commit 28a9a9e83ceae2cee25b9af9ad20d53aaa9ab951 upstream Packet queue state is over used to determine SDMA descriptor availablitity and packet queue request state. cpu 0 ret = user_sdma_send_pkts(req, pcount); cpu 0 if (atomic_read(&pq->n_reqs)) cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE) cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE); At this point pq->n_reqs == 0 and pq->state is incorrectly SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state to return to _INACTIVE. This can also change the state from _DEFERRED to _ACTIVE. However, this is a mostly benign race. Remove the racy code path. Use n_reqs to determine if a packet queue is active or not. Cc: # 4.19.x Reviewed-by: Mitko Haralanov Reviewed-by: Mike Marciniszyn Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

IB/hfi1: Fix an out-of-bounds access in get_hw_stats

2018-12-17T08:24:42+00:00

commit 36d842194a57f1b21fbc6a6875f2fa2f9a7f8679 upstream. When running with KASAN, the following trace is produced: [ 62.535888] ================================================================== [ 62.544930] BUG: KASAN: slab-out-of-bounds in gut_hw_stats+0x122/0x230 [hfi1] [ 62.553856] Write of size 8 at addr ffff88080e8d6330 by task kworker/0:1/14 [ 62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-test-build-kasan+ #8 [ 62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 [ 62.587951] Workqueue: events work_for_cpu_fn [ 62.594050] Call Trace: [ 62.598023] dump_stack+0xc6/0x14c [ 62.603089] ? dump_stack_print_info.cold.1+0x2f/0x2f [ 62.610041] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 62.616615] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.622985] print_address_description+0x6c/0x23c [ 62.629744] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.636108] kasan_report.cold.6+0x241/0x308 [ 62.642365] get_hw_stats+0x122/0x230 [hfi1] [ 62.648703] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.655088] ? __kmalloc+0x110/0x240 [ 62.660695] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.667142] setup_hw_stats+0xd8/0x430 [ib_core] [ 62.673972] ? show_hfi+0x50/0x50 [hfi1] [ 62.680026] ib_device_register_sysfs+0x165/0x180 [ib_core] [ 62.687995] ib_register_device+0x5a2/0xa10 [ib_core] [ 62.695340] ? show_hfi+0x50/0x50 [hfi1] [ 62.701421] ? ib_unregister_device+0x2e0/0x2e0 [ib_core] [ 62.709222] ? __vmalloc_node_range+0x2d0/0x380 [ 62.716131] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.723735] ? vmalloc_node+0x5c/0x70 [ 62.729697] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.737347] ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt] [ 62.744998] ? __rvt_alloc_mr+0x110/0x110 [rdmavt] [ 62.752315] ? rvt_rc_error+0x140/0x140 [rdmavt] [ 62.759434] ? rvt_vma_open+0x30/0x30 [rdmavt] [ 62.766364] ? mutex_unlock+0x1d/0x40 [ 62.772445] ? kmem_cache_create_usercopy+0x15d/0x230 [ 62.780115] rvt_register_device+0x1f6/0x360 [rdmavt] [ 62.787823] ? rvt_get_port_immutable+0x180/0x180 [rdmavt] [ 62.796058] ? __get_txreq+0x400/0x400 [hfi1] [ 62.802969] ? memcpy+0x34/0x50 [ 62.808611] hfi1_register_ib_device+0xde6/0xeb0 [hfi1] [ 62.816601] ? hfi1_get_npkeys+0x10/0x10 [hfi1] [ 62.823760] ? hfi1_init+0x89f/0x9a0 [hfi1] [ 62.830469] ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1] [ 62.838204] ? pcie_capability_clear_and_set_word+0xcd/0xe0 [ 62.846429] ? pcie_capability_read_word+0xd0/0xd0 [ 62.853791] ? hfi1_pcie_init+0x187/0x4b0 [hfi1] [ 62.860958] init_one+0x67f/0xae0 [hfi1] [ 62.867301] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.873876] ? wait_woken+0x130/0x130 [ 62.879860] ? read_word_at_a_time+0xe/0x20 [ 62.886329] ? strscpy+0x14b/0x280 [ 62.891998] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.898405] local_pci_probe+0x70/0xd0 [ 62.904295] ? pci_device_shutdown+0x90/0x90 [ 62.910833] work_for_cpu_fn+0x29/0x40 [ 62.916750] process_one_work+0x584/0x960 [ 62.922974] ? rcu_work_rcufn+0x40/0x40 [ 62.928991] ? __schedule+0x396/0xdc0 [ 62.934806] ? __sched_text_start+0x8/0x8 [ 62.941020] ? pick_next_task_fair+0x68b/0xc60 [ 62.947674] ? run_rebalance_domains+0x260/0x260 [ 62.954471] ? __list_add_valid+0x29/0xa0 [ 62.960607] ? move_linked_works+0x1c7/0x230 [ 62.967077] ? trace_event_raw_event_workqueue_execute_start+0x140/0x140 [ 62.976248] ? mutex_lock+0xa6/0x100 [ 62.982029] ? __mutex_lock_slowpath+0x10/0x10 [ 62.988795] ? __switch_to+0x37a/0x710 [ 62.994731] worker_thread+0x62e/0x9d0 [ 63.000602] ? max_active_store+0xf0/0xf0 [ 63.006828] ? __switch_to_asm+0x40/0x70 [ 63.012932] ? __switch_to_asm+0x34/0x70 [ 63.019013] ? __switch_to_asm+0x40/0x70 [ 63.025042] ? __switch_to_asm+0x34/0x70 [ 63.031030] ? __switch_to_asm+0x40/0x70 [ 63.037006] ? __schedule+0x396/0xdc0 [ 63.042660] ? kmem_cache_alloc_trace+0xf3/0x1f0 [ 63.049323] ? kthread+0x59/0x1d0 [ 63.054594] ? ret_from_fork+0x35/0x40 [ 63.060257] ? __sched_text_start+0x8/0x8 [ 63.066212] ? schedule+0xcf/0x250 [ 63.071529] ? __wake_up_common+0x110/0x350 [ 63.077794] ? __schedule+0xdc0/0xdc0 [ 63.083348] ? wait_woken+0x130/0x130 [ 63.088963] ? finish_task_switch+0x1f1/0x520 [ 63.095258] ? kasan_unpoison_shadow+0x30/0x40 [ 63.101792] ? __init_waitqueue_head+0xa0/0xd0 [ 63.108183] ? replenish_dl_entity.cold.60+0x18/0x18 [ 63.115151] ? _raw_spin_lock_irqsave+0x25/0x50 [ 63.121754] ? max_active_store+0xf0/0xf0 [ 63.127753] kthread+0x1ae/0x1d0 [ 63.132894] ? kthread_bind+0x30/0x30 [ 63.138422] ret_from_fork+0x35/0x40 [ 63.146973] Allocated by task 14: [ 63.152077] kasan_kmalloc+0xbf/0xe0 [ 63.157471] __kmalloc+0x110/0x240 [ 63.162804] init_cntrs+0x34d/0xdf0 [hfi1] [ 63.168883] hfi1_init_dd+0x29a3/0x2f90 [hfi1] [ 63.175244] init_one+0x551/0xae0 [hfi1] [ 63.181065] local_pci_probe+0x70/0xd0 [ 63.186759] work_for_cpu_fn+0x29/0x40 [ 63.192310] process_one_work+0x584/0x960 [ 63.198163] worker_thread+0x62e/0x9d0 [ 63.203843] kthread+0x1ae/0x1d0 [ 63.208874] ret_from_fork+0x35/0x40 [ 63.217203] Freed by task 1: [ 63.221844] __kasan_slab_free+0x12e/0x180 [ 63.227844] kfree+0x92/0x1a0 [ 63.232570] single_release+0x3a/0x60 [ 63.238024] __fput+0x1d9/0x480 [ 63.242911] task_work_run+0x139/0x190 [ 63.248440] exit_to_usermode_loop+0x191/0x1a0 [ 63.254814] do_syscall_64+0x301/0x330 [ 63.260283] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 63.270199] The buggy address belongs to the object at ffff88080e8d5500 which belongs to the cache kmalloc-4096 of size 4096 [ 63.287247] The buggy address is located 3632 bytes inside of 4096-byte region [ffff88080e8d5500, ffff88080e8d6500) [ 63.303564] The buggy address belongs to the page: [ 63.310447] page:ffffea00203a3400 count:1 mapcount:0 mapping:ffff88081380e840 index:0x0 compound_mapcount: 0 [ 63.323102] flags: 0x2fffff80008100(slab|head) [ 63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001 ffff88081380e840 [ 63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 63.350564] page dumped because: kasan: bad access detected [ 63.361974] Memory state around the buggy address: [ 63.369137] ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.379082] ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 63.398944] ^ [ 63.406141] ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.416109] ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.426099] ================================================================== The trace happens because get_hw_stats() assumes there is room in the memory allocated in init_cntrs() to accommodate the driver counters. Unfortunately, that routine only allocated space for the device counters. Fix by insuring the allocation has room for the additional driver counters. Cc: # v4.14+ Fixes: b7481944b06e9 ("IB/hfi1: Show statistics counters under IB stats interface") Reviewed-by: Mike Marciniczyn Reviewed-by: Mike Ruhl Signed-off-by: Piotr Stankiewicz Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

IB/mlx5: Fix page fault handling for MW

2018-12-17T08:24:36+00:00

[ Upstream commit 75b7b86bdb0df37e08e44b6c1f99010967f81944 ] Memory windows are implemented with an indirect MKey, when a page fault event comes for a MW Mkey we need to find the MR at the end of the list of the indirect MKeys by iterating on all items from the first to the last. The offset calculated during this process has to be zeroed after the first iteration or the next iteration will start from a wrong address, resulting incorrect ODP faulting behavior. Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW") Signed-off-by: Artemy Kovalyov Signed-off-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

RDMA/hns: Bugfix pbl configuration for rereg mr

2018-12-17T08:24:35+00:00

[ Upstream commit ca088320a02537f36c243ac21794525d8eabb3bd ] Current hns driver assigned the first two PBL page addresses from previous registered MR to the hardware when reregister MR changing the memory locations occurred. This will lead to PBL addressing error as the PBL has already been released. This patch fixes this wrong assignment by using the page address from new allocated PBL. Fixes: a2c80b7b4119 ("RDMA/hns: Add rereg mr support for hip08") Signed-off-by: Yixian Liu Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

RDMA/rdmavt: Fix rvt_create_ah function signature

2018-12-17T08:24:34+00:00

[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ] rdmavt uses a crazy system that looses the type checking when assinging functions to struct ib_device function pointers. Because of this the signature to this function was not changed when the below commit revised things. Fix the signature so we are not calling a function pointer with a mismatched signature. Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user") Signed-off-by: Kamal Heib Reviewed-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin