kernel/linux.git/drivers/infiniband, branch v3.4.105

IB/umad: Fix use-after-free on close

2014-07-07T01:49:19+00:00

commit 60e1751cb52cc6d1ae04b6bd3c2b96e770b5823f upstream. Avoid that closing /dev/infiniband/umad or /dev/infiniband/issm triggers a use-after-free. __fput() invokes f_op->release() before it invokes cdev_put(). Make sure that the ib_umad_device structure is freed by the cdev_put() call instead of f_op->release(). This avoids that changing the port mode from IB into Ethernet and back to IB followed by restarting opensmd triggers the following kernel oops: general protection fault: 0000 [#1] PREEMPT SMP RIP: 0010:[] [] module_put+0x2c/0x170 Call Trace: [] cdev_put+0x20/0x30 [] __fput+0x1ae/0x1f0 [] ____fput+0xe/0x10 [] task_work_run+0xac/0xe0 [] do_notify_resume+0x9f/0xc0 [] int_signal+0x12/0x17 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051 Signed-off-by: Bart Van Assche Reviewed-by: Yann Droneaud Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/umad: Fix error handling

2014-07-07T01:49:19+00:00

commit 8ec0a0e6b58218bdc1db91dd70ebfcd6ad8dd6cd upstream. Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails. Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails. Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL. Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return. Signed-off-by: Bart Van Assche [ydroneaud@opteya.com: rework a bit to reduce the amount of code changed] Signed-off-by: Yann Droneaud [ nonseekable_open() can't actually fail, but.... - Roland ] Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/srp: Fix a sporadic crash triggered by cable pulling

2014-07-07T01:49:19+00:00

commit 024ca90151f5e4296d30f72c13ff9a075e23c9ec upstream. Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops. Reported-by: Sagi Grimberg Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069 Signed-off-by: Bart Van Assche Reviewed-by: Sagi Grimberg Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/ipath: Translate legacy diagpkt into newer extended diagpkt

2014-07-07T01:49:19+00:00

commit 7e6d3e5c70f13874fb06e6b67696ed90ce79bd48 upstream. This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet. Reported-by: Rickard Strandqvist Reviewed-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/qib: Fix port in pkey change event

2014-07-07T01:49:19+00:00

commit 911eccd284d13d78c92ec4f1f1092c03457d732a upstream. The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE. As of the dual port qib QDR card, this is not necessarily correct. Change to use the port as specified in the call. Reported-by: Alex Estrin Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

ib_srpt: Use correct ib_sg_dma primitives

2014-05-06T14:51:43+00:00

commit b076808051f2c80d38e03fb2f1294f525c7a446d upstream. The code was incorrectly using sg_dma_address() and sg_dma_len() instead of ib_sg_dma_address() and ib_sg_dma_len(). This prevents srpt from functioning with the Intel HCA and indeed will corrupt memory badly. Cc: Bart Van Assche Reviewed-by: Dennis Dalessandro Tested-by: Vinod Kumar Signed-off-by: Mike Marciniszyn Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

IB/ehca: Returns an error on ib_copy_to_udata() failure

2014-05-06T14:51:43+00:00

commit 5bdb0f02add5994b0bc17494f4726925ca5d6ba1 upstream. In case of error when writing to userspace, function ehca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/mthca: Return an error on ib_copy_to_udata() failure

2014-05-06T14:51:43+00:00

commit 08e74c4b00c30c232d535ff368554959403d0432 upstream. In case of error when writing to userspace, the function mthca_create_cq() does not set an error code before following its error path. This patch sets the error code to -EFAULT when ib_copy_to_udata() fails. This was caught when using spatch (aka. coccinelle) to rewrite call to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/nes: Return an error on ib_copy_from_udata() failure instead of NULL

2014-05-06T14:51:43+00:00

commit 9d194d1025f463392feafa26ff8c2d8247f71be1 upstream. In case of error while accessing to userspace memory, function nes_create_qp() returns NULL instead of an error code wrapped through ERR_PTR(). But NULL is not expected by ib_uverbs_create_qp(), as it check for error with IS_ERR(). As page 0 is likely not mapped, it is going to trigger an Oops when the kernel will try to dereference NULL pointer to access to struct ib_qp's fields. In some rare cases, page 0 could be mapped by userspace, which could turn this bug to a vulnerability that could be exploited: the function pointers in struct ib_device will be under userspace total control. This was caught when using spatch (aka. coccinelle) to rewrite calls to ib_copy_{from,to}_udata(). Link: https://www.gitorious.org/opteya/ib-hw-nes-create-qp-null Link: https://www.gitorious.org/opteya/coccib/source/75ebf2c1033c64c1d81df13e4ae44ee99c989eba:ib_copy_udata.cocci Link: http://marc.info/?i=cover.1394485254.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman

IB/ipath: Fix potential buffer overrun in sending diag packet routine

2014-05-06T14:51:43+00:00

commit a2cb0eb8a64adb29a99fd864013de957028f36ae upstream. Guard against a potential buffer overrun. The size to read from the user is passed in, and due to the padding that needs to be taken into account, as well as the place holder for the ICRC it is possible to overflow the 32bit value which would cause more data to be copied from user space than is allocated in the buffer. Reported-by: Nico Golde Reported-by: Fabian Yamaguchi Reviewed-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman