kernel/linux.git/drivers/infiniband/ulp, branch v4.19.39

IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start

2019-03-13T21:02:28+00:00

[ Upstream commit 6ab4aba00f811a5265acc4d3eb1863bb3ca60562 ] The following BUG was reported by kasan: BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020 Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib] Call Trace: dump_stack+0x9a/0xeb print_address_description+0xe3/0x2e0 kasan_report+0x18a/0x2e0 ? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] memcpy+0x1f/0x50 ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] ? kvm_clock_read+0x1f/0x30 ? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib] ? __lock_is_held+0xc2/0x170 ? process_one_work+0x880/0x1960 ? process_one_work+0x912/0x1960 process_one_work+0x912/0x1960 ? wq_pool_ids_show+0x310/0x310 ? lock_acquire+0x145/0x440 worker_thread+0x87/0xbb0 ? process_one_work+0x1960/0x1960 kthread+0x314/0x3d0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 Allocated by task 0: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x168/0x3e0 path_rec_create+0xa2/0x1f0 [ib_ipoib] ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib] dev_hard_start_xmit+0x159/0x8d0 sch_direct_xmit+0x226/0xb40 __dev_queue_xmit+0x1d63/0x2950 neigh_update+0x889/0x1770 arp_process+0xc47/0x21f0 arp_rcv+0x462/0x760 __netif_receive_skb_core+0x1546/0x2da0 netif_receive_skb_internal+0xf2/0x590 napi_gro_receive+0x28e/0x390 ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib] ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib] net_rx_action+0x427/0xe30 __do_softirq+0x28e/0xc42 Freed by task 26680: __kasan_slab_free+0x11d/0x160 kfree+0xf5/0x360 ipoib_flush_paths+0x532/0x9d0 [ib_ipoib] ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib] set_mode+0xc8/0x150 [ib_ipoib] kernfs_fop_write+0x279/0x440 __vfs_write+0xd8/0x5c0 vfs_write+0x15e/0x470 ksys_write+0xb8/0x180 do_syscall_64+0x9b/0x420 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88034c30bcc8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff88034c30bcc8, ffff88034c30bec8) The buggy address belongs to the page: The following race between change mode and xmit flow is the reason for this use-after-free: Change mode Send packet 1 to GID XX Send packet 2 to GID XX | | | start | | | | | | | | | Create new path for GID XX | | and update neigh path | | | | | | | | | | flush_paths | | | | queue_work(cm.start_task) | | Path for GID XX not found | create new path | | start_task runs with old released path There is no locking to protect the lifetime of the path through the ipoib_cm_tx struct, so delete it entirely and always use the newly looked up path under the priv->lock. Fixes: 546481c2816e ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow") Signed-off-by: Feras Daoud Reviewed-by: Erez Shitrit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

RDMA/srp: Rework SCSI device reset handling

2019-02-27T09:09:00+00:00

commit 48396e80fb6526ea5ed267bd84f028bae56d2f9e upstream. Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: Fixes: 94a9174c630c ("IB/srp: reduce lock coverage of command completion") Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

RDMA/srpt: Fix a use-after-free in the channel release code

2019-01-13T08:51:09+00:00

commit ed041919f0d23c109d52cde8da6ddc211c52d67e upstream. This patch avoids that KASAN sporadically reports the following: BUG: KASAN: use-after-free in rxe_run_task+0x1e/0x60 [rdma_rxe] Read of size 1 at addr ffff88801c50d8f4 by task check/24830 CPU: 4 PID: 24830 Comm: check Not tainted 4.20.0-rc6-dbg+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x86/0xca print_address_description+0x71/0x239 kasan_report.cold.5+0x242/0x301 __asan_load1+0x47/0x50 rxe_run_task+0x1e/0x60 [rdma_rxe] rxe_post_send+0x4bd/0x8d0 [rdma_rxe] srpt_zerolength_write+0xe1/0x160 [ib_srpt] srpt_close_ch+0x8b/0xe0 [ib_srpt] srpt_set_enabled+0xe7/0x150 [ib_srpt] srpt_tpg_enable_store+0xc0/0x100 [ib_srpt] configfs_write_file+0x157/0x1d0 __vfs_write+0xd7/0x3d0 vfs_write+0x102/0x290 ksys_write+0xab/0x130 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe Allocated by task 13856: save_stack+0x43/0xd0 kasan_kmalloc+0xc7/0xe0 kasan_slab_alloc+0x11/0x20 kmem_cache_alloc+0x105/0x320 rxe_alloc+0xff/0x1f0 [rdma_rxe] rxe_create_qp+0x9f/0x160 [rdma_rxe] ib_create_qp+0xf5/0x690 [ib_core] rdma_create_qp+0x6a/0x140 [rdma_cm] srpt_cm_req_recv.cold.59+0x1588/0x237b [ib_srpt] srpt_rdma_cm_req_recv.isra.35+0x1d5/0x220 [ib_srpt] srpt_rdma_cm_handler+0x6f/0x100 [ib_srpt] cma_listen_handler+0x59/0x60 [rdma_cm] cma_ib_req_handler+0xd5b/0x2570 [rdma_cm] cm_process_work+0x2e/0x110 [ib_cm] cm_work_handler+0x2aae/0x502b [ib_cm] process_one_work+0x481/0x9e0 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Freed by task 3440: save_stack+0x43/0xd0 __kasan_slab_free+0x139/0x190 kasan_slab_free+0xe/0x10 kmem_cache_free+0xbc/0x330 rxe_elem_release+0x66/0xe0 [rdma_rxe] rxe_destroy_qp+0x3f/0x50 [rdma_rxe] ib_destroy_qp+0x140/0x360 [ib_core] srpt_release_channel_work+0xdc/0x310 [ib_srpt] process_one_work+0x481/0x9e0 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: Sergey Gorenko Cc: Max Gurtovoy Cc: Laurence Oberman Cc: Signed-off-by: Bart Van Assche Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

iser: set sector for ambiguous mr status errors

2018-12-08T11:59:06+00:00

commit 24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream. If for some reason we failed to query the mr status, we need to make sure to provide sufficient information for an ambiguous error (guard error on sector 0). Fixes: 0a7a08ad6f5f ("IB/iser: Implement check_protection") Cc: Reported-by: Dan Carpenter Signed-off-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

IB/ipoib: Use dev_port to expose network interface port numbers

2018-11-13T19:08:37+00:00

[ Upstream commit 9b8b2a323008aedd39a8debb861b825707f01420 ] Some InfiniBand network devices have multiple ports on the same PCI function. This initializes the `dev_port' sysfs field of those network interfaces with their port number. Prior to this the kernel erroneously used the `dev_id' sysfs field of those network interfaces to convey the port number to userspace. The use of `dev_id' was considered correct until Linux 3.15, when another field, `dev_port', was defined for this particular purpose and `dev_id' was reserved for distinguishing stacked ifaces (e.g: VLANs) with the same hardware address as their parent device. Similar fixes to net/mlx4_en and many other drivers, which started exporting this information through `dev_id' before 3.15, were accepted into the kernel 4 years ago. See 76a066f2a2a0 (`net/mlx4_en: Expose port number through sysfs'). Signed-off-by: Arseny Maslennikov Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

IB/ipoib: Clear IPCB before icmp_send

2018-11-13T19:08:33+00:00

[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ] IPCB should be cleared before icmp_send, since it may contain data from previous layers and the data could be misinterpreted as ip header options, which later caused the ihl to be set to an invalid value and resulted in the following stack corruption: [ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping [ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping [ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping [ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping [ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034387] ================================================================== [ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310 [ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7 [ 1083.034990] [ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1 [ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib] [ 1083.035750] Call Trace: [ 1083.035888] dump_stack+0x9a/0xeb [ 1083.036031] print_address_description+0xe3/0x2e0 [ 1083.036213] kasan_report+0x18a/0x2e0 [ 1083.036356] ? __ip_options_echo+0xf08/0x1310 [ 1083.036522] __ip_options_echo+0xf08/0x1310 [ 1083.036688] icmp_send+0x7b9/0x1cd0 [ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070 [ 1083.037018] ? netif_schedule_queue+0x5/0x200 [ 1083.037180] ? debug_show_all_locks+0x310/0x310 [ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120 [ 1083.037519] ? debug_locks_off+0x11/0x80 [ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6 [ 1083.037841] ? check_flags.part.27+0x450/0x450 [ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6 [ 1083.038169] ? debug_locks_off+0x11/0x80 [ 1083.038318] ? skb_dequeue+0x10e/0x1a0 [ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib] [ 1083.038642] ? netif_schedule_queue+0xa8/0x200 [ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.039174] process_one_work+0x912/0x1830 [ 1083.039336] ? wq_pool_ids_show+0x310/0x310 [ 1083.039491] ? lock_acquire+0x145/0x3a0 [ 1083.042312] worker_thread+0x87/0xbb0 [ 1083.045099] ? process_one_work+0x1830/0x1830 [ 1083.047865] kthread+0x322/0x3e0 [ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 1083.053354] ret_from_fork+0x3a/0x50 For instance __ip_options_echo is failing to proceed with invalid srr and optlen passed from another layer via IPCB [ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0 [ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533 [ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84 [ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0 [ 762.140269] ================================================================== [ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0 [ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680 [ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7 Signed-off-by: Denis Drozdov Reviewed-by: Erez Shitrit Reviewed-by: Feras Daoud Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop

2018-09-19T21:28:24+00:00

Use different loop variables for the inner and outer loop. This avoids that an infinite loop occurs if there are more RDMA channels than target->req_ring_size. Fixes: d92c0da71a35 ("IB/srp: Add multichannel support") Cc: Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe

IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler

2018-09-05T21:32:06+00:00

Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by: Aaron Knister Tested-by: Ira Weiny Reviewed-by: Ira Weiny Signed-off-by: Jason Gunthorpe

Merge branch 'linus/master' into rdma.git for-next

2018-08-16T20:21:29+00:00

rdma.git merge resolution for the 4.19 merge window Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new spelling for atomic_fetch_add_unless drivers/nvme/host/rdma.c - Replace max_sge with max_send_sge in new blk code drivers/nvme/target/rdma.c - Use the blk code and revise to use NULL for ib_post_recv when appropriate - Replace max_sge with max_recv_sge in new blk code net/rds/ib_send.c - Use the net code and revise to use NULL for ib_post_recv when appropriate Signed-off-by: Jason Gunthorpe

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-08-16T05:06:26+00:00

Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...