kernel/linux.git/drivers/infiniband/ulp/iser, branch v6.1.168

IB/iser: Prevent invalidating wrong MR

2024-01-25T23:27:38+00:00

[ Upstream commit 2f1888281e67205bd80d3e8f54dbd519a9653f26 ] The iser_reg_resources structure has two pointers to MR but only one mr_valid field. The implementation assumes that we use only *sig_mr when pi_enable is true. Otherwise, we use only *mr. However, it is only sometimes correct. Read commands without protection information occur even when pi_enble is true. For example, the following SCSI commands have a Data-In buffer but never have protection information: READ CAPACITY (16), INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use *sig_mr for some SCSI commands and *mr for the other SCSI commands. In most cases, it works fine because the remote invalidation is applied. However, there are two cases when the remote invalidation is not applicable. 1. Small write commands when all data is sent as an immediate. 2. The target does not support the remote invalidation feature. The lazy invalidation is used if the remote invalidation is impossible. Since, at the lazy invalidation, we always invalidate the MR we want to use, the wrong MR may be invalidated. To fix the issue, we need a field per MR that indicates the MR needs invalidation. Since the ib_mr structure already has such a field, let's use ib_mr.need_inval instead of iser_reg_resources.mr_valid. Fixes: b76a439982f8 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover") Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com Acked-by: Max Gurtovoy Signed-off-by: Sergey Gorenko Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

IB/iser: Fix login with authentication

2022-08-16T12:56:33+00:00

The iSER Initiator uses two types of receive buffers: - one big login buffer posted by iser_post_recvl(); - several small message buffers posted by iser_post_recvm(). The login buffer is used at the login phase and full feature phase in the discovery session. It may take a few requests and responses to complete the login phase. The message buffers are only used in the normal operational session at the full feature phase. After the commit referred in the fixes line, the login operation fails if the authentication is enabled. That happens because the Initiator posts a small receive buffer after the first response from Target. So, the next send operation fails because Target's second response does not fit into the small receive buffer. This commit adds additional checks to prevent posting small receive buffers until the full feature phase. Fixes: 39b169ea0d36 ("IB/iser: Fix RNR errors") Link: https://lore.kernel.org/r/20220805060135.18493-1-sergeygo@nvidia.com Signed-off-by: Sergey Gorenko Reviewed-by: Max Gurtovoy Signed-off-by: Leon Romanovsky

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2022-08-05T02:54:32+00:00

Pull rdma updates from Jason Gunthorpe: "This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud environment. Otherwise the changes are dominated by rxe fixes. There is another RDMA driver on the list that might get merged next cycle, 'MANA' for the Azure cloud environment. Summary: - Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5 - General spelling/grammer fixes - rdma cm can follow changes in neighbours for control packets - Significant amounts of rxe fixes and spec compliance changes - Use the modern NAPI API - Use the bitmap API instead of open coding - Performance improvements for rtrs - Add the ERDMA driver for Alibaba cloud - Fix a use after free bug in SRP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv() RDMA/rxe: Fix error unwind in rxe_create_qp() RDMA/mlx5: Add missing check for return value in get namespace flow RDMA/rxe: Split qp state for requester and completer RDMA/rxe: Generate error completion for error requester QP state RDMA/rxe: Update wqe_index for each wqe error completion RDMA/srpt: Fix a use-after-free RDMA/srpt: Introduce a reference count in struct srpt_device RDMA/srpt: Duplicate port name members IB/qib: Fix repeated "in" within comments RDMA/erdma: Add driver to kernel build environment RDMA/erdma: Add the ABI definitions RDMA/erdma: Add the erdma module RDMA/erdma: Add connection management (CM) support RDMA/erdma: Add verbs implementation RDMA/erdma: Add verbs header file RDMA/erdma: Add event queue implementation RDMA/erdma: Add cmdq implementation RDMA/erdma: Add main include file RDMA/erdma: Add the hardware related definitions ...

IB/iser: Drain the entire QP during destruction flow

2022-06-24T19:17:46+00:00

It's important to drain both the sq and the rq to make sure all WRs were flushed before destroying the QP. Link: https://lore.kernel.org/r/20220615082839.26328-1-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko Reviewed-by: Israel Rukshin Signed-off-by: Max Gurtovoy Signed-off-by: Jason Gunthorpe

scsi: iscsi: Fix session removal on shutdown

2022-06-22T01:14:54+00:00

When the system is shutting down, iscsid is not running so we will not get a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown will then hang waiting on userspace to remove the session. This has libiscsi force the destruction of the session from the kernel when iscsi_host_remove() is called from a driver's shutdown callout. This fixes a regression added in qedi boot with commit d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") which made qedi use the common session removal function that waits on userspace instead of rolling its own kernel based removal. Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com Fixes: d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") Tested-by: Nilesh Javali Reviewed-by: Lee Duncan Reviewed-by: Nilesh Javali Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen

IB/iser: Fix typo in comment

2022-05-24T14:24:57+00:00

Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Link: https://lore.kernel.org/r/20220521111145.81697-4-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall Reviewed-by: Sagi Grimberg Acked-by: Max Gurtovoy Signed-off-by: Jason Gunthorpe

RDMA: Split kernel-only global device caps from uverbs device caps

2022-04-06T18:02:13+00:00

Split out flags from ib_device::device_cap_flags that are only used internally to the kernel into kernel_cap_flags that is not part of the uapi. This limits the device_cap_flags to being the same bitmap that will be copied to userspace. This cleanly splits out the uverbs flags from the kernel flags to avoid confusion in the flags bitmap. Add some short comments describing which each of the kernel flags is connected to. Remove unused kernel flags. Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com Reviewed-by: Christoph Hellwig Reviewed-by: Max Gurtovoy Signed-off-by: Jason Gunthorpe

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2022-03-25T02:37:53+00:00

Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ...

IB/iser: Fix error flow in case of registration failure

2022-03-18T17:37:49+00:00

During READ/WRITE preparation, in case of failure in memory registration using iser_reg_mem_fastreg we must unmap previously mapped iser task. Link: https://lore.kernel.org/r/20220308145546.8372-5-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko Signed-off-by: Max Gurtovoy Acked-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe

IB/iser: Generalize map/unmap dma tasks

2022-03-18T17:37:49+00:00

Avoid code duplication and add the mapping/unmapping of the protection buffers to the iser_dma_map_task_data/iser_dma_unmap_task_data functions. Link: https://lore.kernel.org/r/20220308145546.8372-4-mgurtovoy@nvidia.com Reviewed-by: Sergey Gorenko Signed-off-by: Max Gurtovoy Acked-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe