kernel/linux.git/drivers/infiniband/ulp/iser, branch v5.10.257

IB/iser: Prevent invalidating wrong MR

2024-01-25T22:37:50+00:00

[ Upstream commit 2f1888281e67205bd80d3e8f54dbd519a9653f26 ] The iser_reg_resources structure has two pointers to MR but only one mr_valid field. The implementation assumes that we use only *sig_mr when pi_enable is true. Otherwise, we use only *mr. However, it is only sometimes correct. Read commands without protection information occur even when pi_enble is true. For example, the following SCSI commands have a Data-In buffer but never have protection information: READ CAPACITY (16), INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use *sig_mr for some SCSI commands and *mr for the other SCSI commands. In most cases, it works fine because the remote invalidation is applied. However, there are two cases when the remote invalidation is not applicable. 1. Small write commands when all data is sent as an immediate. 2. The target does not support the remote invalidation feature. The lazy invalidation is used if the remote invalidation is impossible. Since, at the lazy invalidation, we always invalidate the MR we want to use, the wrong MR may be invalidated. To fix the issue, we need a field per MR that indicates the MR needs invalidation. Since the ib_mr structure already has such a field, let's use ib_mr.need_inval instead of iser_reg_resources.mr_valid. Fixes: b76a439982f8 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover") Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com Acked-by: Max Gurtovoy Signed-off-by: Sergey Gorenko Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

scsi: iscsi: Rel ref after iscsi_lookup_endpoint()

2022-04-20T07:23:16+00:00

[ Upstream commit 9e5fe1700896c85040943fdc0d3fee0dd3e0d36f ] Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Stop queueing during ep_disconnect

2022-04-20T07:23:15+00:00

[ Upstream commit 891e2639deae721dc43764a44fa255890dc34313 ] During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

RDMA: Add rdma_connect_locked()

2020-10-28T12:14:49+00:00

There are two flows for handling RDMA_CM_EVENT_ROUTE_RESOLVED, either the handler triggers a completion and another thread does rdma_connect() or the handler directly calls rdma_connect(). In all cases rdma_connect() needs to hold the handler_mutex, but when handler's are invoked this is already held by the core code. This causes ULPs using the 2nd method to deadlock. Provide a rdma_connect_locked() and have all ULPs call it from their handlers. Link: https://lore.kernel.org/r/0-v2-53c22d5c1405+33-rdma_connect_locking_jgg@nvidia.com Reported-and-tested-by: Guoqing Jiang Fixes: 2a7cec538169 ("RDMA/cma: Fix locking for the RDMA_CM_CONNECT state") Acked-by: Santosh Shilimkar Acked-by: Jack Wang Reviewed-by: Christoph Hellwig Reviewed-by: Max Gurtovoy Reviewed-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

IB/iser: use new shared CQ mechanism

2020-07-29T12:10:31+00:00

Have the driver use shared CQs provided by the rdma core driver. Since this provides similar functionality to iser_comp it has been removed. Now there is no reason to allocate very large CQs when the driver is loaded while gaining the advantage of shared CQs. Link: https://lore.kernel.org/r/20200722135629.49467-1-maxg@mellanox.com Signed-off-by: Yamin Friedman Acked-by: Max Gurtovoy Reviewed-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe

RDMA: Correct trivial kernel-doc inconsistencies

2020-06-22T14:57:39+00:00

Silence documentation build warnings by correcting kernel-doc comments. ./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'uobject' not described in 'ib_create_srq_user' ./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'udata' not described in 'ib_create_srq_user' ./drivers/infiniband/core/umem_odp.c:161: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_alloc_child' ./drivers/infiniband/core/umem_odp.c:225: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_get' ./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'ah_attr' description in 'rvt_create_ah' ./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'create_flags' description in 'rvt_create_ah' ./drivers/infiniband/ulp/iser/iscsi_iser.h:363: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ./drivers/infiniband/ulp/iser/iscsi_iser.h:377: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd0' not described in 'opa_vesw_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd1' not described in 'opa_vesw_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd2' not described in 'opa_vesw_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd3' not described in 'opa_vesw_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd4' not described in 'opa_vesw_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd0' not described in 'opa_per_veswport_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd1' not described in 'opa_per_veswport_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd2' not described in 'opa_per_veswport_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd3' not described in 'opa_per_veswport_info' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:342: warning: Function parameter or member 'reserved' not described in 'opa_veswport_summary_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd0' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd1' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd2' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd3' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd4' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd5' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd6' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd7' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd8' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd9' not described in 'opa_veswport_error_counters' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:460: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:485: warning: Function parameter or member 'reserved' not described in 'opa_vnic_notice_attr' ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:500: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad_trap' Link: https://lore.kernel.org/r/5373936.DvuYhMxLoT@laptop.coltonlewis.name Signed-off-by: Colton Lewis Signed-off-by: Jason Gunthorpe

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

RDMA/iser: Remove support for FMR memory registration

2020-06-02T23:32:53+00:00

FMR is not supported on most recent RDMA devices (that use fast memory registration mechanism). Also, FMR was recently removed from NFS/RDMA ULP. Link: https://lore.kernel.org/r/1-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Israel Rukshin Signed-off-by: Max Gurtovoy Reviewed-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe

IB/iser: Always check sig MR before putting it to the free pool

2020-03-26T19:46:54+00:00

libiscsi calls the check_protection transport handler only if SCSI-Respose is received. So, the handler is never called if iSCSI task is completed for some other reason like a timeout or error handling. And this behavior looks correct. But the iSER does not handle this case properly because it puts a non-checked signature MR to the free pool. Then the error occurs at reusing the MR because it is not allowed to invalidate a signature MR without checking. This commit adds an extra check to iser_unreg_mem_fastreg(), which is a part of the task cleanup flow. Now the signature MR is checked there if it is needed. Link: https://lore.kernel.org/r/20200325151210.1548-1-sergeygo@mellanox.com Signed-off-by: Sergey Gorenko Reviewed-by: Max Gurtovoy Signed-off-by: Jason Gunthorpe