kernel/linux.git/drivers/iio, branch v5.6.17

iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()

2020-05-27T15:48:27+00:00

commit 115c215a7e5753ddf982c8760ce7904dd3fbb8ae upstream. We need to release a lock if st_lsm6dsx_check_odr() fails, we can't return directly. Fixes: 76551a3c3df1 ("iio: imu: st_lsm6dsx: specify slave odr in slv_odr") Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ti-ads8344: Fix channel selection

2020-05-27T15:48:23+00:00

commit bcfa1e253d2e329e1ebab5c89f3c73f6dd17606c upstream. During initial submission the selection of the channel was done using the scan_index member of the iio_chan_spec structure. It was an abuse because this member is supposed to be used with a buffer so it was removed. However there was still the need to be able to known how to select a channel, the correct member to store this information is address. Thanks to this it is possible to select any other channel than the channel 0. Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips") Signed-off-by: Gregory CLEMENT Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'

2020-05-27T15:48:23+00:00

commit aad4742fbf0a560c25827adb58695a4497ffc204 upstream. A call to 'vf610_dac_exit()' is missing in an error handling path. Fixes: 1b983bf42fad ("iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoC") Signed-off-by: Christophe JAILLET Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: sca3000: Remove an erroneous 'get_device()'

2020-05-27T15:48:23+00:00

commit 928edefbc18cd8433f7df235c6e09a9306e7d580 upstream. This looks really unusual to have a 'get_device()' hidden in a 'dev_err()' call. Remove it. While at it add a missing \n at the end of the message. Fixes: 574fb258d636 ("Staging: IIO: VTI sca3000 series accelerometer driver (spi)") Signed-off-by: Christophe JAILLET Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32-dfsdm: fix device used to request dma

2020-05-27T15:48:22+00:00

commit b455d06e6fb3c035711e8aab1ca18082ccb15d87 upstream. DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32-adc: fix device used to request dma

2020-05-27T15:48:22+00:00

commit 52cd91c27f3908b88e8b25aed4a4d20660abcc45 upstream. DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: 2763ea0585c99 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: specify slave odr in slv_odr

2020-05-02T06:50:42+00:00

commit 76551a3c3df151750a842b003c6899e9c62e0fd2 upstream. Introduce slv_odr in ext_info data structure in order to distinguish between sensor hub trigger (accel sensor) odr and i2c slave odr and properly compute samples in FIFO pattern Fixes: e485e2a2cfd6 ("iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm") Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO

2020-05-02T06:50:42+00:00

commit 7762902c89c4c78d32ec562f1ada44d02039104b upstream. st_lsm6dsx suffers of a read misalignment on untagged FIFO when all 3 supported sensors (accel, gyro and ext device) are running at different ODRs (the use-case is reported in the LSM6DSM Application Note at pag 100). Fix the issue taking into account decimation factor reading the FIFO pattern. Fixes: e485e2a2cfd6 ("iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm") Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio:ad7797: Use correct attribute_group

2020-05-02T06:50:42+00:00

commit 28535877ac5b2b84f0d394fd67a5ec71c0c48b10 upstream. It should use ad7797_attribute_group in ad7797_info, according to commit ("iio:ad7793: Add support for the ad7796 and ad7797"). Scale is fixed for the ad7796 and not programmable, hence should not have the scale_available attribute. Fixes: fd1a8b912841 ("iio:ad7793: Add support for the ad7796 and ad7797") Signed-off-by: YueHaibing Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: xilinx-xadc: Make sure not exceed maximum samplerate

2020-04-29T14:34:44+00:00

commit 3b7f9dbb827ce8680b98490215e698b6079a9ec5 upstream. The XADC supports a samplerate of up to 1MSPS. Unfortunately the hardware does not have a FIFO, which means it generates an interrupt for each conversion sequence. At one 1MSPS this creates an interrupt storm that causes the system to soft-lock. For this reason the driver limits the maximum samplerate to 150kSPS. Currently this check is only done when setting a new samplerate. But it is also possible that the initial samplerate configured in the FPGA bitstream exceeds the limit. In this case when starting to capture data without first changing the samplerate the system can overload. To prevent this check the currently configured samplerate in the probe function and reduce it to the maximum if necessary. Signed-off-by: Lars-Peter Clausen Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman