kernel/linux.git/drivers/iio, branch v5.4.50

iio: bmp280: fix compensation of humidity

2020-06-24T15:50:12+00:00

[ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ] Limit the output of humidity compensation to the range between 0 and 100 percent. Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity. Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3. Although this clamp is documented, it was never in the driver of the kernel. It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures. Signed-off-by: Andreas Klinger Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: bmp280: Tolerate IRQ before registering

2020-06-24T15:50:08+00:00

[ Upstream commit 97b31a6f5fb95b1ec6575b78a7240baddba34384 ] With DEBUG_SHIRQ enabled we have a kernel crash [ 116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 116.606571] Call Trace: [ 116.609023] [ 116.611047] complete+0x34/0x50 [ 116.614206] bmp085_eoc_irq+0x9/0x10 [bmp280] because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers ought to be able to handle an interrupt happening before request_irq() returns. Fixes: aae953949651 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by: Andy Shevchenko Acked-by: Linus Walleij Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32-adc: fix a wrong error message when probing interrupts

2020-06-10T18:24:56+00:00

commit 10134ec3f8cefa6a40fe84987f1795e9e0da9715 upstream. A wrong error message is printed out currently, like on STM32MP15: - stm32-adc-core 48003000.adc: IRQ index 2 not found. This is seen since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"). The STM32 ADC core driver wrongly requests up to 3 interrupt lines. It should request only the necessary IRQs, based on the compatible: - stm32f4/h7 ADCs share a common interrupt - stm32mp1, has one interrupt line per ADC. So add the number of required interrupts to the compatible data. Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.

2020-06-10T18:24:56+00:00

commit 13e945631c2ffb946c0af342812a3cd39227de6e upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Cc: Acked-by: Tomasz Duszynski Signed-off-by: Greg Kroah-Hartman

iio: vcnl4000: Fix i2c swapped word reading.

2020-06-10T18:24:56+00:00

commit 18dfb5326370991c81a6d1ed6d1aeee055cb8c05 upstream. The bytes returned by the i2c reading need to be swapped unconditionally. Otherwise, on be16 platforms, an incorrect value will be returned. Taking the slow path via next merge window as its been around a while and we have a patch set dependent on this which would be held up. Fixes: 62a1efb9f868 ("iio: add vcnl4000 combined ALS and proximity sensor") Signed-off-by: Mathieu Othacehe Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio:chemical:sps30: Fix timestamp alignment

2020-06-10T18:24:56+00:00

commit a5bf6fdd19c327bcfd9073a8740fa19ca4525fd4 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Cc: Acked-by: Tomasz Duszynski Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32-dfsdm: fix device used to request dma

2020-05-27T15:46:51+00:00

[ Upstream commit b455d06e6fb3c035711e8aab1ca18082ccb15d87 ] DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()

2020-05-27T15:46:50+00:00

[ Upstream commit a9ab624edd9186fbad734cfe5d606a6da3ca34db ] dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi Acked-by: Olivier Moysan Acked-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32-adc: fix device used to request dma

2020-05-27T15:46:50+00:00

[ Upstream commit 52cd91c27f3908b88e8b25aed4a4d20660abcc45 ] DMA channel request should use device struct from platform device struct. Currently it's using iio device struct. But at this stage when probing, device struct isn't yet registered (e.g. device_register is done in iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves"), a warning message is printed as the links in sysfs can't be created, due to device isn't yet registered: - Cannot create DMA slave symlink - Cannot create DMA dma:rx symlink Fix this by using device struct from platform device to request dma chan. Fixes: 2763ea0585c99 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()

2020-05-27T15:46:50+00:00

[ Upstream commit 735404b846dffcb320264f62b76e6f70012214dd ] dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by: Peter Ujfalusi Acked-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin