kernel/linux.git/drivers/iio, branch v5.15.208

iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer

2026-04-18T08:33:36+00:00

[ Upstream commit 3a4187ec454e19903fd15f6e1825a4b84e59a4cd ] The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode(). Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa Signed-off-by: Zicheng Qu Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron [ Context change fixed. ] Signed-off-by: Robert Garcia Signed-off-by: Sasha Levin

iio: gyro: mpu3050: Fix out-of-sequence free_irq()

2026-04-18T08:33:33+00:00

commit d14116f6529fa085b1a1b1f224dc9604e4d2a29c upstream. The triggered buffer is initialized before the IRQ is requested. The removal path currently calls iio_triggered_buffer_cleanup() before free_irq(). This violates the expected LIFO. Place free_irq() in the correct location relative to iio_triggered_buffer_cleanup(). Fixes: 3904b28efb2c7 ("iio: gyro: Add driver for the MPU-3050 gyroscope") Suggested-by: Jonathan Cameron Reviewed-by: Linus Walleij Signed-off-by: Ethan Tidmore Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: gyro: mpu3050: Move iio_device_register() to correct location

2026-04-18T08:33:33+00:00

commit 4c05799449108fb0e0a6bd30e65fffc71e60db4d upstream. iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly. Fixes: 3904b28efb2c7 ("iio: gyro: Add driver for the MPU-3050 gyroscope") Suggested-by: Jonathan Cameron Reviewed-by: Linus Walleij Signed-off-by: Ethan Tidmore Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: gyro: mpu3050: Fix irq resource leak

2026-04-18T08:33:33+00:00

commit 4216db1043a3be72ef9c2b7b9f393d7fa72496e6 upstream. The interrupt handler is setup but only a few lines down if iio_trigger_register() fails the function returns without properly releasing the handler. Add cleanup goto to resolve resource leak. Detected by Smatch: drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn: 'irq' from request_threaded_irq() not released on lines: 1124. Fixes: 3904b28efb2c7 ("iio: gyro: Add driver for the MPU-3050 gyroscope") Reviewed-by: Linus Walleij Signed-off-by: Ethan Tidmore Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: gyro: mpu3050: Fix incorrect free_irq() variable

2026-04-18T08:33:33+00:00

commit edb11a1aef4011a4b7b22cc3c3396c6fe371f4a6 upstream. The handler for the IRQ part of this driver is mpu3050->trig but, in the teardown free_irq() is called with handler mpu3050. Use correct IRQ handler when calling free_irq(). Fixes: 3904b28efb2c7 ("iio: gyro: Add driver for the MPU-3050 gyroscope") Reviewed-by: Linus Walleij Signed-off-by: Ethan Tidmore Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: Set FIFO ODR for accelerometer and gyroscope only

2026-04-18T08:33:32+00:00

commit 630748afa7030b272b7bee5df857e7bcf132ed51 upstream. The st_lsm6dsx_set_fifo_odr() function, which is called when enabling and disabling the hardware FIFO, checks the contents of the hw->settings->batch array at index sensor->id, and then sets the current ODR value in sensor registers that depend on whether the register address is set in the above array element. This logic is valid for internal sensors only, i.e. the accelerometer and gyroscope; however, since commit c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support"), this function is called also when configuring the hardware FIFO for external sensors (i.e. sensors accessed through the sensor hub functionality), which can result in unrelated device registers being written. Add a check to the beginning of st_lsm6dsx_set_fifo_odr() so that it does not touch any registers unless it is called for internal sensors. Fixes: c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support") Signed-off-by: Francesco Lavra Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: light: vcnl4035: fix scan buffer on big-endian

2026-04-18T08:33:32+00:00

commit fdc7aa54a5d44c05880a4aad7cfb41aacfd16d7b upstream. Rework vcnl4035_trigger_consumer_handler() so that we are not passing what should be a u16 value as an int * to regmap_read(). This won't work on bit endian systems. Instead, add a new unsigned int variable to pass to regmap_read(). Then copy that value into the buffer struct. The buffer array is replaced with a struct since there is only one value being read. This allows us to use the correct u16 data type and has a side-effect of simplifying the alignment specification. Also fix the endianness of the scan format from little-endian to CPU endianness. Since we are using regmap to read the value, it will be CPU-endian. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: David Lechner Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: dac: ad5770r: fix error return in ad5770r_read_raw()

2026-04-18T08:33:32+00:00

commit c354521708175d776d896f8bdae44b18711eccb6 upstream. Return the error code from regmap_bulk_read() instead of 0 so that I/O failures are properly propagated. Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support") Signed-off-by: Antoniu Miclaus Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

driver: iio: add missing checks on iio_info's callback access

2026-04-18T08:33:17+00:00

commit c4ec8dedca961db056ec85cb7ca8c9f7e2e92252 upstream. Some callbacks from iio_info structure are accessed without any check, so if a driver doesn't implement them trying to access the corresponding sysfs entries produce a kernel oops such as: [ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute [...] [ 2203.783416] Call trace: [ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48 [ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120 [ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4 [ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0 [ 2203.802236] vfs_read from ksys_read+0xa4/0xd4 [ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54 [ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0) [ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000 [ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000 [ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0 [ 2203.830363] Code: bad PC value [ 2203.832695] ---[ end trace 0000000000000000 ]--- Reviewed-by: Nuno Sa Signed-off-by: Julien Stephan Link: https://lore.kernel.org/r/20240530-iio-core-fix-segfault-v3-1-8b7cd2a03773@baylibre.com Signed-off-by: Jonathan Cameron Signed-off-by: Charles Xu Signed-off-by: Greg Kroah-Hartman

iio: imu: inv_icm42600: fix odr switch to the same value

2026-04-18T08:33:16+00:00

commit c9f3a593137d862d424130343e77d4b5260a4f5a upstream. ODR switch is done in 2 steps when FIFO is on : change the ODR register value and acknowledge change when reading the FIFO ODR change flag. When we are switching to the same odr value, we end up waiting for a FIFO ODR flag that is never happening. Fix the issue by doing nothing and exiting properly when we are switching to the same ODR value. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Signed-off-by: Jean-Baptiste Maneyrol Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman