kernel/linux.git/drivers/iio, branch v4.14.217

iio: imu: st_lsm6dsx: fix edge-trigger interrupts

2021-01-17T12:58:59+00:00

commit 3f9bce7a22a3f8ac9d885c9d75bc45569f24ac8b upstream If we are using edge IRQs, new samples can arrive while processing current interrupt since there are no hw guarantees the irq line stays "low" long enough to properly detect the new interrupt. In this case the new sample will be missed. Polling FIFO status register in st_lsm6dsx_handler_thread routine allow us to read new samples even if the interrupt arrives while processing previous data and the timeslot where the line is "low" is too short to be properly detected. Fixes: 89ca88a7cdf2 ("iio: imu: st_lsm6dsx: support active-low interrupts") Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/5e93cda7dc1e665f5685c53ad8e9ea71dbae782d.1605378871.git.lorenzo@kernel.org Cc: Signed-off-by: Jonathan Cameron [sudip: manual backport to old irq handler path] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: flip irq return logic

2021-01-17T12:58:59+00:00

commit ec76d918f23034f9f662539ca9c64e2ae3ba9fba upstream No need for using reverse logic in the irq return, fix this by flip things around. Signed-off-by: Sean Nyekjaer Signed-off-by: Jonathan Cameron Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

iio:magnetometer:mag3110: Fix alignment and data leak issues.

2021-01-09T12:37:39+00:00

commit 89deb1334252ea4a8491d47654811e28b0790364 upstream One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc() so no data can leak apart from previous readings. The explicit alignment of ts is not necessary in this case but does make the code slightly less fragile so I have included it. Fixes: 39631b5f9584 ("iio: Add Freescale mag3110 magnetometer driver") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Cc: Link: https://lore.kernel.org/r/20200920112742.170751-4-jic23@kernel.org [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

iio:imu:bmi160: Fix alignment and data leak issues

2021-01-09T12:37:39+00:00

commit 7b6b51234df6cd8b04fe736b0b89c25612d896b8 upstream One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable array in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc() so no data can leak apart from previous readings. In this driver, depending on which channels are enabled, the timestamp can be in a number of locations. Hence we cannot use a structure to specify the data layout without it being misleading. Fixes: 77c4ad2d6a9b ("iio: imu: Add initial support for Bosch BMI160") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Cc: Daniel Baluta Cc: Daniel Baluta Cc: Link: https://lore.kernel.org/r/20200920112742.170751-6-jic23@kernel.org [sudip: adjust context and use bmi160_data in old location] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

iio:imu:bmi160: Fix too large a buffer.

2020-12-29T12:47:10+00:00

commit dc7de42d6b50a07b37feeba4c6b5136290fcee81 upstream. The comment implies this device has 3 sensor types, but it only has an accelerometer and a gyroscope (both 3D). As such the buffer does not need to be as long as stated. Note I've separated this from the following patch which fixes the alignment for passing to iio_push_to_buffers_with_timestamp() as they are different issues even if they affect the same line of code. Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Cc: Daniel Baluta Cc: Link: https://lore.kernel.org/r/20200920112742.170751-5-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman

iio:pressure:mpl3115: Force alignment of buffer

2020-12-29T12:47:10+00:00

commit 198cf32f0503d2ad60d320b95ef6fb8243db857f upstream. Whilst this is another case of the issue Lars reported with an array of elements of smaller than 8 bytes being passed to iio_push_to_buffers_with_timestamp(), the solution here is a bit different from the other cases and relies on __aligned working on the stack (true since 4.6?) This one is unusual. We have to do an explicit memset() each time as we are reading 3 bytes into a potential 4 byte channel which may sometimes be a 2 byte channel depending on what is enabled. As such, moving the buffer to the heap in the iio_priv structure doesn't save us much. We can't use a nice explicit structure on the stack either as the data channels have different storage sizes and are all separately controlled. Fixes: cc26ad455f57 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Reviewed-by: Alexandru Ardelean Cc: Peter Meerwald Cc: Link: https://lore.kernel.org/r/20200920112742.170751-7-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman

iio:light:rpr0521: Fix timestamp alignment and prevent data leak.

2020-12-29T12:47:10+00:00

commit a61817216bcc755eabbcb1cf281d84ccad267ed1 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc() so no data can leak apart from previous readings and in this case the status byte from the device. The forced alignment of ts is not necessary in this case but it potentially makes the code less fragile. >From personal communications with Mikko: We could probably split the reading of the int register, but it would mean a significant performance cost of 20 i2c clock cycles. Fixes: e12ffd241c00 ("iio: light: rpr0521 triggered buffer") Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Cc: Mikko Koivunen Cc: Link: https://lore.kernel.org/r/20200920112742.170751-2-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman

iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume

2020-12-29T12:47:10+00:00

commit 560c6b914c6ec7d9d9a69fddbb5bf3bf71433e8b upstream. Fix the missing clk_disable_unprepare() of info->pclk before return from rockchip_saradc_resume in the error handling case when fails to prepare and enable info->clk. Suggested-by: Robin Murphy Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc") Signed-off-by: Qinglang Miao Cc: Link: https://lore.kernel.org/r/20201103120743.110662-1-miaoqinglang@huawei.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: buffer: Fix demux update

2020-12-29T12:47:10+00:00

commit 19ef7b70ca9487773c29b449adf0c70f540a0aab upstream. When updating the buffer demux, we will skip a scan element from the device in the case `in_ind != out_ind` and we enter the while loop. in_ind should only be refreshed with `find_next_bit()` in the end of the loop. Note, to cause problems we need a situation where we are skippig over an element (channel not enabled) that happens to not have the same size as the next element. Whilst this is a possible situation we haven't actually identified any cases in mainline where it happens as most drivers have consistent channel storage sizes with the exception of the timestamp which is the last element and hence never skipped over. Fixes: 5ada4ea9be16 ("staging:iio: add demux optionally to path from device to buffer") Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20201112144323.28887-1-nuno.sa@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode

2020-11-24T12:05:54+00:00

commit e5b1032a656e9aa4c7a4df77cb9156a2a651a5f9 upstream. Some 360 degree hinges (yoga) style 2-in-1 devices use 2 KXCJ91008-s to allow the OS to determine the angle between the display and the base of the device, so that the OS can determine if the 2-in-1 is in laptop or in tablet-mode. On Windows both accelerometers are read by a special HingeAngleService process; and this process calls a DSM (Device Specific Method) on the ACPI KIOX010A device node for the sensor in the display, to let the embedded-controller (EC) know about the mode so that it can disable the kbd and touchpad to avoid spurious input while folded into tablet-mode. This notifying of the EC is problematic because sometimes the EC comes up thinking that device is in tablet-mode and the kbd and touchpad do not work. This happens for example on Irbis NB111 devices after a suspend / resume cycle (after a complete battery drain / hard reset without having booted Windows at least once). Other 2-in-1s which are likely affected too are e.g. the Teclast F5 and F6 series. The kxcjk-1013 driver may seem like a strange place to deal with this, but since it is *the* driver for the ACPI KIOX010A device, it is also the driver which has access to the ACPI handle needed by the DSM. Add support for calling the DSM and on probe unconditionally tell the EC that the device is laptop mode, fixing the kbd and touchpad sometimes not working. Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID") Reported-and-tested-by: russianneuromancer Signed-off-by: Hans de Goede Cc: Link: https://lore.kernel.org/r/20201110133835.129080-3-hdegoede@redhat.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman