kernel/linux.git/drivers/iio/pressure, branch v6.12.80

iio: pressure: mprls0025pa: fix pressure calculation

2026-03-04T12:20:30+00:00

[ Upstream commit d63403d4e31ae537fefc5c0ee9d90f29b4fc532b ] A sign change is needed for proper calculation of the pressure. This is a minor fix since it only affects users that might have custom silicon from Honeywell that has honeywell,pmin-pascal != 0. Also due to the fact that raw pressure values can not be lower than output_min (400k-3.3M) there is no need to calculate a decimal for the offset. Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor") Signed-off-by: Petre Rodan Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: mprls0025pa: fix scan_type struct

2026-03-04T12:20:30+00:00

[ Upstream commit 8a228e036926f7e57421d750c3724e63f11b808a ] Fix the scan_type sign and realbits assignment. The pressure is a 24bit unsigned int between output_min and output_max. transfer function A: 10% to 90% of 2^24 transfer function B: 2.5% to 22.5% of 2^24 transfer function C: 20% to 80% of 2^24 [MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 } [MPR_FUNCTION_B] = { .output_min = 419430, .output_max = 3774874 } [MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 } Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor") Signed-off-by: Petre Rodan Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: mprls0025pa: fix interrupt flag

2026-03-04T12:20:30+00:00

[ Upstream commit fff3f1a7d805684e4701a70bfaeba39622b59dbc ] Interrupt falling/rising flags should only be defined in the device tree. Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor") Signed-off-by: Petre Rodan Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: mprls0025pa: fix SPI CS delay violation

2026-03-04T12:20:30+00:00

[ Upstream commit 583fa86ca581595b1f534a8de6d49ba8b3bf7196 ] Based on the sensor datasheet in chapter 7.6 SPI timing, Table 20, during the SPI transfer there is a minimum time interval requirement between the CS being asserted and the first clock edge (tHDSS). This minimum interval of 2.5us is being violated if two consecutive SPI transfers are queued up. Fixes: a0858f0cd28e ("iio: pressure: mprls0025pa add SPI driver") Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf?download=false Signed-off-by: Petre Rodan Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: mprls0025pa: fix spi_transfer struct initialisation

2026-03-04T12:20:30+00:00

[ Upstream commit 1e0ac56c92e26115cbc8cfc639843725cb3a7d6a ] Make sure that the spi_transfer struct is zeroed out before use. Fixes: a0858f0cd28e ("iio: pressure: mprls0025pa add SPI driver") Signed-off-by: Petre Rodan Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()

2025-08-28T14:31:08+00:00

commit 43c0f6456f801181a80b73d95def0e0fd134e1cc upstream. `devm_gpiod_get_optional()` may return non-NULL error pointer on failure. Check its return value using `IS_ERR()` and propagate the error if necessary. Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional") Signed-off-by: Salah Triki Reviewed-by: David Lechner Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: pressure: zpa2326: Use aligned_s64 for the timestamp

2025-07-06T09:01:34+00:00

[ Upstream commit 886a446b76afddfad307488e95e87f23a08ffd51 ] On x86_32 s64 fields are only 32-bit aligned. Hence force the alignment of the field and padding in the structure by using aligned_s64 instead. Reviewed-by: David Lechner Link: https://patch.msgid.link/20250413103443.2420727-19-jic23@kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: mprls0025pa: use aligned_s64 for timestamp

2025-05-22T12:29:37+00:00

[ Upstream commit ffcd19e9f4cca0c8f9e23e88f968711acefbb37b ] Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure the struct itself it also 8-byte aligned. While touching this, convert struct mpr_chan to an anonymous struct to consolidate the code a bit to make it easier for future readers. Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor") Signed-off-by: David Lechner Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-2-d6a5d2b1c9fe@baylibre.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: zpa2326: fix information leak in triggered buffer

2025-01-17T12:40:56+00:00

commit 6007d10c5262f6f71479627c1216899ea7f09073 upstream. The 'sample' local struct is used to push data to user space from a triggered buffer, but it has a hole between the temperature and the timestamp (u32 pressure, u16 temperature, GAP, u64 timestamp). This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. Cc: stable@vger.kernel.org Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241125-iio_memset_scan_holes-v1-3-0cb6e98d895c@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

2024-10-13T15:23:47+00:00

Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ...